Solid Waste Segregation Cubicle of Dimension 75 Ft L x 15 Ft W x 7 Ft H with Partition,... Tender

Procurement Summary

State : Tamil Nadu

Summary : Solid Waste Segregation Cubicle of Dimension 75 Ft L x 15 Ft W x 7 Ft H with Partition, Close/Open Way and Suitable Frame and Base

Deadline : 19 Jun 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 119455001

Document Ref. No. : 65255264

Financier : Self Financed

Purchaser Ownership : Public

Document Fees : Refer Document

Tender Value : Refer Document

EMD : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Solid waste segregation cubicle of dimension 75 ft L x 15 ft W x 7 ft H with partition, close/op en way and suitable frame and base as per following specifications: 1) Equal volume cubicle made of C sect ion ISMC mild steel channel confirming to IS 808:1989 dimension 100 mm W x 100 mm D x 100 mm D x 3 mm thickness (25 ft L x 15 ft W x 7 ft H) - 3 nos/Set- i) (Vertical Frame- 7 feet height each at 5 feet gap ) - 4 0 nos/Set, ii) Horizontal Frame - 15 ft length each side at 3.33 ft gap- 3 nos ) - 36 Nos/Set, 2) Galvalume pr ofile sheet confirming to IS 14246-1995 cladding:- 1.5mm thickness (Make: JSW or equivalent), 3) Double s wing close/open frame 180 deg swiveling made of Galvalume sheet and ISMC channel with 18 inch tower bo lt and 2 nos flip safety latches, 4) Base perimeter of the cubicle framework shall be secured with M12 grade quick setting slurry with 8 mm TMT Mild steel reinforcement - 15 inches Height from base level and 20 inch es concealed in ground, 5) Cubicle leveling with 35mm PCC aggregate - 12 inch depth. Total volumetric cap acity - 7875 cubic feet appx. Dimensional Sketch attached for reference. Note: Installation shall be done as per site specific requirement. [ Warranty Period: 30 Months after the date of delivery ] ]
Contract Category: Expenditure
Contract Type : Goods
Tender Type : Open - Indigenous
Contract Category : Expenditure
Evaluation Criteria : Itemwise/Consigneewise
Bidding System : Single Packet
Pre-Bid Conference Required : No
Pre-Bid Conference Date Time : Not Applicable
Tendering Section : 65
Inspection Agency : CONSIGNEE
Publishing Date / Time : 20/05/2025 14:32 Item Category General
Procure From Approved Sources : No
Approving Agency : Not Applicable
Closing Date Time : 19/06/2025 14:30
Validity of Offer ( Days) : 90
Ranking Order for Bids : Lowest to Highest
Advertised Value :
Tender Doc. Cost (INR) : 0.00
Earnest Money (INR) : 0.00

Consignee SSE/ELS/RPM, SR Tamil Nadu 1.00 Set

Documents

 Tender Notice

viewNitPdf_4967681.pdf

5401983.pdf