Login
Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
Download Documents
Get Help to Participate in This Tender
Change Password
For better security, update the account password.
KARNATAKA POWER CORPORATION LIMITED has floated a tender for Providing Sand Blasting And Polymer Based High Performance Corrosion Protection Epoxy Coating On External Surface Of The Penstocks Between Valve House To Saddle No.32 For Unit No.8 Laid On Hill Slope.... The project location is Shivamogga, Karnataka, India. The reference number is KPCL/2025-26/PS/WORK_INDENT3289 and it is closing on 20 Sep 2025. Suppliers can request Register free of cost to get the complete Tender details and download the document.
Procurement Summary
State: Karnataka
Summary: Providing Sand Blasting And Polymer Based High Performance Corrosion Protection Epoxy Coating On External Surface Of The Penstocks Between Valve House To Saddle No.32 For Unit No.8 Laid On Hill Slope...
Deadline: 20 Sep 2025
Other Information
Notice Type: Tender
TOT Ref.No.: 125828542
Document Ref. No.: KPCL/2025-26/PS/WORK_INDENT3289
Financier: Self Financed
Purchaser Ownership: Public
Document Fees: ₹ 2120
Tender Value: ₹ 8470452.48
EMD: ₹ 169410.00
Purchaser's Detail
Name: Login to see tender_details
Address: Login to see tender_details
Email: Login to see tender_details
Login to see detailsTender Details
Providing Sand Blasting And Polymer Based High Performance Corrosion Protection Epoxy Coating On External Surface Of The Penstocks Between Valve House To Saddle No.32 For Unit No.8 Laid On Hill Slope Area At Sharavathy Generating Station. The Total Area Of Penstock Pipes To Be Painted Works Out To 5223 Sq. Mtr. Approximately. All Painting Surfaces Should Be Prepared By Sand Blasting To Achieve Sa 2/2.5. The External Surface Should Be Free From Abrasion, Blisters, Peeled Off Surface Of The Old Paints Rust, Etc., The Full Surface Is To Be Cleaned Until The Parent Metal Is Suitable For Painting. Necessary Scaffolding Shall Be Done By The Contractor. After Cleaning, The Surface Should Be Applied With A Coat Of Rust Inhibitive Compound, One Coat Of Epoxy Primer Of Approved Quality And Two Coats Of Approved High Performance Solid Anticorrosive Epoxy Paint. The Total Thickness Of The Coating After One Coat Epoxy Primer Paint And Two Coats Of Epoxy Painting Should Be 240 Microns As Specified In Detailed Technical Spe
Category: WORKS
EMD: 169410.00
Est Amt: 8470452.48
Tender Fees: 2120.00
Documents
Sec-II-PROJECT-FEATURES-AND-SPECIAL-CONDITIONS.doc
Sec-III-TECHNICAL-SPECIFICATION-AND-SCOPE-OF-WORK-SUPPLY.doc
Sec-I-General-Terms-Conditions.doc
Sign in with Google