Login
Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
Download Documents
Get Help to Participate in This Tender
Our team will contact you shortly.
Your activation form is pending.
Please submit it to start receiving email alerts.
Submit NowChange Password
For better security, update the account password.
DIRECTORATE OF EMPLOYMENT AND TRAINING has floated a tender for TOOLS EQUIPMENTS FOR ITI TRAINING, Calipers (V2) Ammeter - Analog (Panel Meter) as per IS 1248 Angle Grinder, Qty: 989. The project location is Ahmedabad, Gujarat, India. The reference number is - and it is closing on 14 Nov 2026. Suppliers can request Register free of cost to get the complete Tender details and download the document.
Procurement Summary
State: Gujarat
Summary: TOOLS EQUIPMENTS FOR ITI TRAINING, Calipers (V2) Ammeter - Analog (Panel Meter) as per IS 1248 Angle Grinder, Qty: 989
Deadline: 14 Nov 2026
Posting Date: 29 Oct 2026
Other Information
Notice Type: Tender
TOT Ref.No.: 151666033
Document Ref. No.: Login to see detail
Financier: Self Financed
Purchaser Ownership: Public
Document Fees: Refer Document
Tender Value: ₹ 1130798
EMD: ₹ 78
Purchaser's Detail
Name: Login to see details
Address: Login to see details
Email: Login to see details
Login to see detailsTender Details
Descrption: Login to see details
IMP: Login to see details
Contact Details: Login to see details Login to see details
Documents
| # | Title | Description | Qty | Unit | Delivery (Days) |
|---|---|---|---|---|---|
| 1 | Contactor and auxiliary contacts | 3 PHASE, 415 VOLT, 25 A WITH 2NO AND 2NC CONTACTS | 2 | NOS | 15 |
| 2 | Cut out Relays 16A, 440V | 16A, 440V | 1 | NOS | 15 |
| 3 | HIGH PRESSURE SODIUM LAMP COMPLETE SET | 150W 240V | 1 | NOS | 15 |
| 4 | LOW PRESSURE SODIUM LAMP COMPLETE SET | 150W 240V | 1 | NOS | 15 |
| 5 | Rubber mat | 2 ft x 4ft x 1 inch (FOR ELECTRICIAN TRADE) | 2 | NOS | 15 |
| 6 | Digital Multi Meter | DC 200mv -1000v, 0 - 10A and AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit | 2 | NOS | 15 |
| 7 | 4 point D.C. Starter For 2.5 KW DC motor | For 2.5 KW DC motor | 1 | NOS | 15 |
| 8 | AC Starters Resistance type starter For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | NOS | 15 |
| 9 | AC Starters Star Delta Starter- Manual For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | NOS | 15 |
| 10 | AC Starters Star Delta Starter Semi automatic For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | NOS | 15 |
| 11 | AC Starters Auto Transformer type For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | NOS | 15 |
| 12 | Manual Motor coil Winding Machine With step arbor | Gear Ratio - 1 to 3 or 1 to 10 Step Arbor (Mandrels/Farma) - a set of adjustable, multi-stepped dies/dies or rectangular formers. Turn Counter - Integrated mechanical (analog) 5-digit revolution counter. Wire Gauge Compatibility - super-enamelled copper wires (SWG 16 to SWG 37) Maximum coil diameter - Up to 150 - 200 mm. Maximum coil width - 70 - 100 mm. | 1 | NOS | 15 |
| 13 | DIGITAL I.C. TESTER | Power Source Battery Cell, AA Battery | 1 | NOS | 15 |
| 14 | HOME THEATRE SOUND SYSTEM | 100W Power, Powerful Subwoofer, USB port, Bluetooth | 1 | NOS | 15 |
| 15 | CALIPER INSIDE SPRING | CALIPER INSIDE SPRING 6 INCH / 15 CM | 64 | NOS | 15 |
| 16 | CALIPER HERMACHRODITE.SPRING 15 CM | CALIPER HERMAPHRODITE SPRING 15 CM | 50 | NOS | 15 |
| 17 | DIVIDER SPRING | DIVIDER SPRING 6 INCH / 15 CM | 97 | NOS | 15 |
| 18 | CALIPER OUTSIDE SPRING 20 CM | CALIPER OUTSIDE SPRING 20 CM | 2 | NOS | 15 |
| 19 | ANGLE PLATE SIZE 200 X 100 X 200 MM | ANGLE PLATE SIZE 200 X 100 X 200 MM | 2 | NOS | 15 |
| 20 | OIL STONE UNIVERSEL SILICON CARBIDE | OIL STONE (CARBORUNDUM) UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE) 150 X 50 X 25 MM | 9 | NOS | 15 |
| 21 | DRILL TWIST SS NUMBER 0 TO 60 SET | DRILL TWIST S.S NUMBER 0 TO 60 SET | 2 | NOS | 15 |
| 22 | TWIST DRILLS 3MM TO 13MM, PARALLEL SHANK | TWIST DRILLS 3MM TO 13MM (PARALLEL SHANK) | 1 | NOS | 15 |
| 23 | GRINDING WHEEL DRESSER DIAMOND | GRINDING WHEEL DRESSER (DIAMOND) | 1 | NOS | 15 |
| 24 | REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM SET | REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM - SET | 1 | NOS | 15 |
| 25 | TOOL BIT HOLDER AS ARMSTRONG L.H. | TOOL BIT HOLDER AS ARMSTRONG L.H. | 5 | NOS | 15 |
| 26 | TOOL BIT HOLDER AS ARMSTRONG R.H. | TOOL BIT HOLDER AS ARMSTRONG R.H. | 1 | NOS | 15 |
| 27 | CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA | CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA. 3 JAWS WITH BOLTING ARRANGEMENT AND GRADUATED INDEGREES | 1 | NOS | 15 |
| 28 | ANGLE PLATE - UNIVERSAL TABLE | ANGLE PLATE - UNIVERSAL TABLE | 1 | NOS | 15 |
| 29 | KNURLING TOOL | KNURLING TOOL (DIAMOND, STRAIGHT) | 1 | NOS | 15 |
| 30 | DUAL POWER SUPPLY, 230V, 50HZ, FUSE-800MA | 230V, 50HZ, FUSE-800MA | 1 | NOS | 15 |
| 31 | SYNCHRONOUS MOTOR | 240V, 60RPM, CAPACITOR FOR SYNCHRONOUS MOTOR (0.8MF (+/- 5%) 450 VAC) | 1 | NOS | 15 |
| 32 | POWER SUPPLY | 0-30V DC, 3A | 1 | NOS | 15 |
| 33 | CUTTER SIDE AND FACE B 100 X 12 X 27 | CUTTER SIDE AND FACE B 100 X 12 X 27 | 1 | NOS | 15 |
| 34 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 50 X 12 BORE DIA 27 MM 55 DEG. | 2 | NOS | 15 |
| 35 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 70 DEG | 2 | NOS | 15 |
| 36 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 75 DEG | 1 | NOS | 15 |
| 37 | CUTTER SHELL END MILL | CUTTER SHELL END MILL DIA. 50 MM X 36 MM WIDTH X DIA. 27 BORE | 2 | NOS | 15 |
| 38 | CUTTER SHELL END MILL | CUTTER SHELL END MILL DIA. 75 MM X 50 MM WIDTH X DIA. 27 BORE | 2 | NOS | 15 |
| 39 | CUTTER PARALLEL SHANK END MILLS SET | CUTTER PARALLEL SHANK END MILLS DIA 6 MM, 10 MM,16 MM SET DOUBLE FLUTED | 4 | NOS | 15 |
| 40 | CUTTER T SLOT WITH PARALLEL SHANK | CUTTER T SLOT WITH PARALLEL SHANK - CUTTER DIA. 17.5 X 8 MM WIDTH X DIA. OF SHANK 8 MM | 2 | NOS | 15 |
| 41 | IVOLUTE MILLING CUTTER 2 MODULE | IVOLUTE MILLING CUTTER 2 MODULE | 1 | NOS | 15 |
| 42 | TAPER GAUGE M.T.NO. 1,2,3,4 and 5 | TAPER GAUGE M.T.NO. 1,2,3,4 & 5 | 1 | NOS | 15 |
| 43 | PLANER GAUGE STANDARD SIZE | PLANER GAUGE STANDARD SIZE | 1 | NOS | 15 |
| 44 | GRINDER WITH TWO 18 CM WHEELS | GRINDER WITH TWO 18 CM WHEELS WITH TWIST DRILL GRINDING ATTACHMENT. | 1 | NOS | 15 |
| 45 | AC alternator slip ring puller, Variable | AC Alternator slip ring puller made from hardened and tempered steel for removing alternator slip rings having outside diameter ranging between 25 to 50 mm. | 1 | NOS | 15 |
| 46 | Engineers stethoscope | Engineers Stethoscope -Mechanical-Hollow Tube type having a super-thin diaphragm and hollow Stainless steel probe of minimum 200 mm length that securely amplifies noises and isolates the exact location of low decible noise. | 1 | NOS | 15 |
| 47 | Stud extractors | Stud extractor set of 3 made of high carbon steel and size 5 mm, 6 mm and 8 mm in a box. | 3 | NOS | 15 |
| 48 | De-soldering pump | 40 W | 26 | NOS | 15 |
| 49 | Rubber mat, 180x45x2.5 cm | 180x45x2.5 cm | 2 | NOS | 15 |
| 50 | Signal tracer | Input Impedance - High impedance (typically above 50K Ohm),Gain & Sensitivity - Approximately 40dB ,Output - Built-in speaker (often 0.5W at 8 Ohm),Power Supply - Ranges from 9V | 2 | NOS | 15 |
| 51 | Conductivity meter | Material - Mild Steel, Conductivity Range-1000 mS/cm, Light Source-LED, Display Type3 1/2 DIGIT LED DISPLAY | 1 | NOS | 15 |
| 52 | Needle destroyer | 220-250V AC Supply 50-60Hz. Low Power Consumption. | 1 | NOS | 15 |
| 53 | Oxygen concentration | POWER CONSUMPTION 610 WATTS | 1 | NOS | 15 |
| 54 | Flow meter | Poly Carbonate Material, Analog Display Type | 1 | NOS | 15 |
| 55 | Colorimeter | 8 Digital Filters, 405-700 nm Wavelength Range, 1ml Sample Volume | 1 | NOS | 15 |
| 56 | SOUND SYSTEM | 2.1 | 1 | NOS | 15 |
| 57 | PATCH PANEL 24 PORT | 24 Port | 3 | NOS | 15 |
| 58 | PLUMB BOB 115 GRAMS | 115 GRAMS | 12 | NOS | 15 |
| 59 | SINGLE PHASE ENERGY METER | SOLID STATE SOLAR BASE (BIDIRECTIONAL) 5-30AMP,240V | 1 | NOS | 15 |
| 60 | FLUX METER 0-500 tesla | 0-500 tesla | 1 | NOS | 15 |
| 61 | RUBBER MAT 2 METERS X 1 METER X 9 MM | 2 METERS X 1 METER X 9 MM | 2 | NOS | 15 |
| 62 | RECHARGEABLE BATTERY 12V,100AH | 12V,100AH | 1 | NOS | 15 |
| 63 | RECHARGEABLE BATTERY RECHARGEABLE BATTERY 6V,7AH | 6V,7AH | 1 | NOS | 15 |
| 64 | SOLAR CHARGE CONTROLLER | SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH ( DAY LIGHTING) 6 V ,5 A | 1 | NOS | 15 |
| 65 | TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS | 2.5 X 1.20 X 0.75 METERS | 1 | NOS | 15 |
| 66 | PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular. | PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular. | 12 | NOS | 15 |
| 67 | SURVEY PLOTTING SCALES WITH OFFSET BITS | SURVEY PLOTTING SCALES WITH OFFSET BITS (6 IN ONE SET) 30 cms long withoffset scales. | 12 | NOS | 15 |
| 68 | SET SQUARE CELLULIOD 45 DEGREE | SET SQUARE CELLULIOD 45 DEGREE -8 INCH 20 cm, 2 mm thick with bevelled edges 45 degree . | 12 | NOS | 15 |
| 69 | SET SQUARE 30 - 60 DEGREE IS 1561 | SET SQUARE 30 - 60 DEGREE (250X1.5 M.M.) IS 1561 25 cm, 2mm thick with bevelled edges60 degrees. | 8 | NOS | 15 |
| 70 | MINI DRAFTER 750mm | MINI DRAFTER 750mm/Mini drafter/ Parallel Bar | 12 | NOS | 15 |
| 71 | RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG. | RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG. | 4 | NOS | 15 |
| 72 | WOODEN PEGS | AS PER STANDARD SIZE | 1 | NOS | 15 |
| 73 | PRISMATIC COMPASS WITH STAND 110 mm dia. | PRISMATIC COMPASS WITH STAND 110 mm dia. | 1 | NOS | 15 |
| 74 | TABLE FOR SERVER, PRINTER, SCANNER 650 X 500 X 750 MM | TABLE FOR SERVER/PRINTER/SCANNER 650 X 500 X 750 MM | 1 | NOS | 15 |
| 75 | Drawing table 750mm X 550mm | Drawing table 750mm X 550mm | 3 | NOS | 15 |
| 76 | DRAWING BOARD | Drawing Board 750mm X 550mm | 7 | NOS | 15 |
| 77 | BRADAWL | 1/4 INCH | 26 | NOS | 15 |
| 78 | 1 PHASE CEILING FAN 900 Mm | 1 PHASE 900 MM | 1 | NOS | 15 |
| 79 | 1 PHASE CEILING FAN 1200 mM | 1 PHASE 1200 MM | 1 | NOS | 15 |
| 80 | 1 PHASE CEILING FAN 1400 mM | 1 PHASE 1400 MM | 2 | NOS | 15 |
| 81 | SEMI AUTOMATIC STAR DELTA STARTER FOR AC MOTOR | 7.5 HP 415 V, 3-Phase, 50 Hz AC supply. | 1 | NOS | 15 |
| 82 | 2 POINT STARER FOR D.C.MOTOR | 3 HP 220 V | 1 | NOS | 15 |
| 83 | 4 POINT STARER FOR D.C.MOTOR | 3 HP 220 V | 1 | NOS | 15 |
| 84 | SINGLE PHASE PREVENTER | 415 VOLT | 1 | NOS | 15 |
| 85 | DIGITAL MULTIMETER | DC 200mv -1000v, 0 - 10A & AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit | 9 | NOS | 15 |
| 86 | CLIPON METER 0-100 A | 0-100 A | 2 | NOS | 15 |
| 87 | EARTH TESTER 10000 Ohm | 10000 Ohm | 1 | NOS | 15 |
| 88 | S.W.G. Wire GAUGE | Wire Gauge - Metric | 3 | NOS | 15 |
| 89 | WATER LEVEL CONTROLLER | 415 V | 1 | NOS | 15 |
| 90 | PULLEY PULLER WITH 3 LEGS 150MM, 300MM | 150MM, 300MM | 1 | NOS | 15 |
| 91 | ELECTRICAL DRILL PORTABLE 0-12MM, 750W | 0-12MM, 750W | 1 | NOS | 15 |
| 92 | STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT | 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT | 2 | NOS | 15 |
| 93 | STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT | 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT | 2 | NOS | 15 |
| 94 | OPEN WELL MOTOR 1 HP, 230V, 1440 RPM 1 PHASE | 1 HP, 230V, 1440 RPM 1 PHASE | 1 | NOS | 15 |
| 95 | OPEN WELL MOTOR 3 HP, 440V, 1440 RPM 3 PHASE | 3 HP, 440V, 1440 RPM 3 PHASE | 1 | NOS | 15 |
| 96 | SUBMERCIBLE PUMP 2 HP,440V, 3 PHASE | 2 HP,440V, 3 PHASE | 1 | NOS | 15 |
| 97 | SUBMERCIBLE PUMP 1 HP,230V, 1 PHASE | 1 HP,230V, 1 PHASE | 1 | NOS | 15 |
| 98 | MOTOR PUMP SET 1 HP, 230V, 1 PHASE | 1 HP, 230V, 1 PHASE | 1 | NOS | 15 |
| 99 | SMALL PLASTIC BOWLS 6 inch DIAMETER | 6 INCH DIAMETER | 24 | NOS | 15 |
| 100 | PACK AND BLEACH BRUSH | length - 16 cm ,width - 3cm | 24 | NOS | 15 |
| 101 | PADDLE BRUSH | Length - 24 cm to 28 cm Width - 7 cm to 9 cm ,ball tipped nylon pins static bristles. | 24 | NOS | 15 |
| 102 | DYE BRUSH | Synthetic water based ,Width - 1 to 2.5 inch ,3 to 4 inch | 24 | NOS | 15 |
| 103 | FIRST AID KIT | Medium size metalic box min size - 32.5x28.5x8 cm wall mountable | 2 | NOS | 15 |
| 104 | PROFESSIONAL HAIRBRUSHES SET | Round Brush Size - 25mm to 53 mm,Barrel | 12 | NOS | 15 |
| 105 | CRIMPER | Micro crimper 1/2 inch to 3/4 inch wide, Heat range- High quality crimper operate between 150 Celsius to 230 Celsius PTC or MCH heaters auto cut off dual voltage facility | 9 | NOS | 15 |
| 106 | WAX HEATER | Power - 80W to 100W, 220V to 240V, 45C to 120c thermostat ranging, capacities 4000ml to 500ml, key Features auto cut off for safety & non Stick aluminum removable pots | 2 | NOS | 15 |
| 107 | PEDI SPA TUB | include a 22 to 28 - liter water capacity, dimensions around 24 inch X 20 inch X 15 inch, and a durable fiberglass or acrylic shell. | 1 | NOS | 15 |
| 108 | YOGA MAT | 1. Dimensions Standard - 68 inch X 24 inch (173 cm X 61 cm) - Best for average-height individuals Long & Wide - 72 inch 84 inch length X 26 inch - 36 inch width Provides extra space so your head and feet stay on the mat. Travel Folds flat and weighs under 1 kg. <br>2. Thickness- 1.5 mm to 3 mm, Ultra-lightweight and portable. Best for travel, hot yoga, or strong ground connection during Ashtanga 4 mm to 5 mm, Industry standard. Offers a perfect balance of joint cushioning and stability for balancing poses in Vinyasa and Hatha yoga 6 mm to 10 mm, Ideal for joint pain, restorative, or Yin yoga. Provides maximum cushioning but can make balancing poses more challenging. <br>3. Materials TPE (Thermoplastic Elastomer) Eco-friendly, lightweight, and recyclable. Features great grip, tear resistance, and moderate cushioning. Natural Rubber - Best grip/traction, eco-friendly, but heavier and prone to degrading in direct sunlight. PVC - Highly durable and provides excellent sticky grip, but contains synthetic chemicals and is not biodegradable. PU (Polyurethane), Exceptional wet/sweat grip for hot yoga, though it requires more maintenance. EVA / NBR, Affordable and lightweight, but less dense and prone to flattening over time. <br>4. Texture and Grip Open-Cell - Acts like a sponge to absorb sweat. Excellent for hot yoga.Closed-Cell - Does not absorb sweat. Easier to clean, but can become slippery when wet. Textured patterns enhance surface friction | 4 | NOS | 15 |
| 109 | THIMBLES | AS PER AVAILABLE IN MARKET | 42 | NOS | 15 |
| 110 | FRENCH CURVE | AS PER AVAILABLE IN MARKET | 12 | NOS | 15 |
| 111 | THREAD CUTTER | AS PER AVAILABLE IN MARKET | 42 | NOS | 15 |
| 112 | LEG SHAPER | AS PER AVAILABLE IN MARKET | 3 | NOS | 15 |
| 113 | GARMNET HANGERS | WOODEN SUIT HANGERS | 21 | NOS | 15 |
| 114 | Digital Still Camera High resolution amateur camera | High resolution amateur camera | 1 | NOS | 15 |
| 115 | D.C. COMPOUND MOTOR 3 H.P. 250 V | WITH 4 POINT STARTER AND FIELD REGULATOR(LABORATORY TYPE) | 1 | NOS | 15 |
| 116 | ELEVATOR ROPE CUTTER UP TO 32 MM | UP TO 32 MM | 2 | NOS | 15 |
| 117 | RAIL ALIGNMENT GAUGE | 330MM | 2 | NOS | 15 |
| 118 | ELECTROMAGNET BREAK ASSEMBLY | BRAKE SIZE - 250 MM, <br>COIL VOLTAGE -220 V AC , <br>BRAKE TYPE - AC FAIL SAFE | 1 | NOS | 15 |
| 119 | CONTROL TRANSFORMER | SINGLE PHASE 250 W WITH 12V, 24V, 48V, 110V AND 240V TAPPING | 1 | NOS | 15 |
| 120 | POTENTIAL TRANSFORMER | 240/110, 415/110 VOLT | 1 | NOS | 15 |
| 121 | SAFETY BELT WITH PROVISION FOR KEEPING TOOLS | SAFETY BELT WITH PROVISION FOR KEEPING TOOLS | 4 | NOS | 15 |
| 122 | SAFETY ROPE, SUITABLE SIZE | NYLON BRAIDED CORD MADE FROM HIGH TENACITY MULTIFILAMENT YARN FOR 13 MM DIA | 4 | NOS | 15 |
| 123 | SAFETY NET 3 X 3 METER | 3X3 METER | 2 | NOS | 15 |
| 124 | CHAIN PULLEY BLOCK -3 TON CAPACITY- MANUAL TYPE | 3 TON | 1 | NOS | 15 |
| 125 | TRANSFORMER SINGLE PHASE | 1 K.V.A. 250/100 V | 1 | NOS | 15 |
| 126 | TWIZER FINE POINT | 125 MM | 1 | NOS | 15 |
| 127 | DIGITAL MULTIMETER 4.5 DIGIT | 4.5 DIGIT | 1 | NOS | 15 |
| 128 | TONG TESTER PORTABLE SMALL SIZE IN LEATHER CASE | Type- Portable Tong Tester (Clamp Meter), Analog <br> Current Range- 0-10-30 A AC <br> Voltage Range- 0-500 V AC <br> Jaw Opening- Suitable for measuring insulated conductors up to approximately 20 mm diameter <br> Accuracy- (+/-) 3% of Full Scale or better <br> Meter Movement- Analog moving-coil with clear scale <br> Construction- Rugged insulated body with insulated clamp jaws <br> Carrying Case- Leather/Artificial Leather Carrying Case <br> Accessories- Test leads and instruction manual <br> Application- Suitable for electrical measurements and practical training in ITI workshops <br> Standard- Shall conform to IS/IS/IEC 61010-1 (Safety requirements for electrical measuring equipment) and IS/IEC 61010-2-032 (Particular requirements for hand-held and hand-manipulated current sensors/clamp meters), latest editions. <br> | 2 | NOS | 15 |
| 129 | REFRIGERANT R134 A CYLINDER CAP. 5 KG | Technical Specifications <br> Refrigerant Type- R-134a (1,1,1,2-Tetrafluoroethane). <br> Capacity- 5 kg net refrigerant filling. <br> Purity- Minimum 99.5 Percentage pure refrigerant. <br> Composition- Single-component HFC refrigerant. <br> Cylinder Type- Refillable steel cylinder with corrosion-resistant coating. <br> Cylinder Valve- Brass valve with safety cap and leak-proof sealing arrangement. <br> Cylinder Test Pressure- Suitable for refrigerant storage and transportation as per applicable regulations. <br> Filling- Supplied with virgin refrigerant (not recycled/recovered). <br> Identification- Cylinder shall be marked with refrigerant type, net weight, tare weight, batch number, manufacturing date, and safety information. <br> Application- Suitable for refrigeration and air-conditioning systems using R-134a refrigerant. <br> Safety- Non-flammable refrigerant handling instructions and safety data sheet (SDS/MSDS) shall be provided. <br>Standard <br> Refrigerant shall conform to ASHRAE Standard 34 (Designation and Safety Classification of Refrigerants). <br> Refrigerant quality shall conform to AHRI Standard 700 (Specification for Refrigerants). <br> Cylinder shall comply with applicable requirements of ISO 4706 / PESO regulations (where applicable) for refrigerant gas cylinders. <br>Accessories <br> Cylinder valve cap. <br> Safety label/marking. <br> | 1 | NOS | 15 |
| 130 | MEGGER 1000 VOLTS | Technical Specifications <br> Type- Portable Insulation Resistance Tester (Megger). <br> Test Voltage- 1000 V DC. <br> Insulation Resistance Range- Minimum up to 2000 M or higher. <br> Accuracy- (+/-) 5% or better. <br> Display- Digital display with clear reading (or equivalent high-quality analog indication). <br> Test Function- Insulation resistance measurement with automatic discharge facility. <br> Continuity Test- Low resistance continuity measurement facility preferred. <br> Power Supply- Battery operated with low battery indication. <br> Test Leads- Heavy-duty insulated test leads with safety probes and crocodile clips. <br> Housing- Rugged, shock-resistant insulated casing suitable for workshop use. <br> Safety Protection- Over-voltage and overload protection. <br> Application- Suitable for testing insulation of motors, cables, transformers, electrical machines, and wiring installations. <br> Accessories- Carrying case, test leads, batteries, and instruction manual. <br>Standard <br> Shall conform to IS/IEC 61557-2 (Electrical safety in low voltage distribution systems - Insulation resistance testing equipment). <br> Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). <br> Measurement category - Minimum CAT III 600 V or higher. <br> | 1 | NOS | 15 |
| 131 | SERVICE OSCILLATOR | Technical Specifications <br> Type - Function Generator / Service Oscillator. <br> Frequency Range - Minimum 10 Hz to 1 MHz or higher. <br> Output Waveforms - Sine wave, Square wave, and Triangle wave. <br> Frequency Accuracy - (+/-) 1% or better. <br> Output Amplitude - Variable output, minimum 0 to 10 V peak-to-peak (adjustable). <br> Output Impedance - 50 Ohm (nominal). <br> Controls - Frequency adjustment, waveform selection, amplitude control, and output control. <br> Display - Digital frequency display preferred. <br> Duty Cycle Control - Adjustable duty cycle facility preferred. <br> DC Offset - Adjustable DC offset facility preferred. <br> Power Supply - 230 V AC, 50 Hz. <br> Construction - Rugged enclosure suitable for laboratory and workshop use. <br> Accessories - Test leads/BNC cable, power cord, and instruction manual. <br> Application - Suitable for testing amplifiers, oscillators, filters, communication circuits, and electronic trainer circuits. <br>Standard <br> Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). <br> Electromagnetic compatibility shall conform to applicable IS/IEC EMC requirements. <br> Equipment shall be calibrated before supply. <br> <br> | 1 | NOS | 15 |
| 132 | ELECTRONIC LEAK DETECTOR, ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22 | ELECTRONIC LEAK DETECTOR / ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22 <br>Technical Specifications <br> Type - Digital Electronic Multi-Refrigerant Leak Detector. <br> Refrigerant Detection Capability - Shall detect HFC refrigerants (R-134a), HCFC refrigerants (R-22), Hydrocarbon refrigerants (R-290, R-600a) <br> Sensor Type - Advanced semiconductor sensor / heated diode sensor / equivalent high-sensitivity sensor suitable for multiple refrigerants. <br> Sensitivity - Adjustable sensitivity with minimum detection capability of 5 g/year or better for halogen refrigerants. <br> Leak Indication - Digital display with audible alarm and visual indication. <br> Sensitivity Adjustment - Minimum three levels (Low/Medium/High) or continuous adjustment facility. <br> Probe - Flexible gooseneck probe, minimum 300 mm length, for access to confined areas. <br> Warm-up Time - Maximum 60 seconds. <br> Response Time - Quick response with automatic reset/background compensation facility preferred. <br> Power Supply - Rechargeable battery or replaceable batteries with low battery indication. <br> Operating Temperature - Suitable for normal workshop/service conditions. <br> Construction - Rugged handheld design with impact-resistant body. <br> Application - Suitable for refrigeration, air-conditioning servicing, leak testing, and ITI practical training. <br> Accessories - Carrying case, battery/charger (if rechargeable), spare sensor (if applicable), and instruction manual. <br>Standard <br> Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). <br> Equipment shall be supplied with factory calibration/test certificate. <br> The instrument shall comply with applicable refrigerant service equipment safety requirements. | 2 | NOS | 15 |
| 133 | MULTIMETER ANALOGUE | Technical Specifications <br> Type - Portable Analog Multimeter with moving coil meter movement. <br> Measurements - AC Voltage, DC Voltage, DC Current, Resistance and continuity testing. <br> DC Voltage Ranges - Minimum up to 1000 V DC. <br> AC Voltage Ranges - Minimum up to 750 V AC. <br> DC Current Ranges - Minimum up to 10 A. <br> Resistance Ranges - Multiple ranges from low ohms to minimum 1 M Ohm or higher. <br> Accuracy - (+/-)2.5% of full scale or better. <br> Sensitivity - Minimum 20 k Ohm/V DC (preferred). <br> Display - Clear analog scale with mirror scale for accurate reading. <br> Protection - Overload protection with fuse/protective circuitry. <br> Test Leads - Heavy-duty insulated test leads with probes. <br> Power Supply - Battery operated for resistance measurement with low battery indication preferred. <br> Construction - Rugged shock-resistant housing suitable for workshop use. <br> Accessories - Test leads, battery, carrying pouch/case, and instruction manual. <br> Application - Suitable for electronics testing, troubleshooting, and practical training. <br>Standard <br> Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). <br> Measurement category - Minimum CAT III 600 V or higher. <br> Equipment shall be calibrated/tested before supply. | 1 | NOS | 15 |
| 134 | DIGITAL THERMOMETER GRADUATED DISC ANALOGY TYPE | Technical Specifications <br> Type - Graduated dial analog thermometer with sensing probe. <br> Temperature Range - Minimum -50 Deg Celsius to +150 Deg Celsius. <br> Scale - Clear graduated temperature scale in Deg Celsius. <br> Accuracy - (+/-)1 Deg Celsius to (+/-)2 Deg Celsius or better. <br> Sensor Element - Suitable temperature sensing element (bimetallic/thermostatic type or equivalent). <br> Probe - Stainless steel sensing probe suitable for insertion/contact measurement. <br> Dial Size - Large, easy-to-read corrosion-resistant dial. <br> Construction - Rugged body suitable for workshop use. <br> Response - Quick temperature response suitable for refrigeration servicing. <br> Application - Suitable for measuring temperature of evaporators, condensers, pipelines, and electronic/refrigeration components. <br> Accessories - Protective cover/case and instruction manual. <br> Workmanship - Free from defects, with clear markings and smooth operation. <br>Standard <br> Temperature measurement accuracy shall conform to applicable requirements of IS/IEC 60584 / equivalent temperature measurement standards, where applicable. <br> Material and workmanship shall conform to good engineering practice. | 1 | NOS | 15 |
| 135 | BRUSH LESS DC MOTOR CONTROLLER | Technical Specifications <br> Type - Permanent Magnet Brushless DC (BLDC) Motor with Electronic PWM Controller. <br> Application - Suitable for RAC training on inverter air-conditioner outdoor/indoor fan motor drive technology. <br> Motor Output Power - 15-30 Watt. <br> Rated DC Supply Voltage- 315 V DC (nominal). <br> Motor Construction - Permanent magnet rotor with three-phase stator winding. <br> Controller Type- Dedicated BLDC electronic drive controller with PWM speed control. <br> Speed Control- PWM (Pulse Width Modulation) based variable speed control. <br> Speed Adjustment- Adjustable speed control through potentiometer/control input. <br> Feedback System- Hall sensor feedback or equivalent electronic position sensing system. <br> Commutation- Electronic commutation through controller. <br> Protection Features - Over-current protection, Over-voltage protection, Short-circuit protection, Motor stall protection, Thermal protection. <br> Rotation Control- Forward/reverse rotation facility preferred. <br> Terminals- Clearly marked DC input, motor output, Hall sensor/control terminals. <br> Construction- Compact, robust, insulated assembly suitable for repeated student demonstrations. <br> Application- Suitable for study of inverter AC fan motor operation, BLDC drive circuit, PWM speed control, and troubleshooting practices. <br> Accessories- BLDC motor, PWM controller, Hall sensor cable (if applicable), connecting leads, mounting arrangement, and operation manual. <br>Standard <br> Motor shall conform to applicable requirements of IS/IEC 60034 (Rotating Electrical Machines). <br> Controller electrical safety shall conform to IS/IEC 61010-1 or equivalent applicable standard. <br> Electrical insulation and protection shall be suitable for 315 V DC operation. <br> Components shall be RoHS compliant (preferred). | 2 | NOS | 15 |
| 136 | AC 3 PHASE MOTOR 400V 50HZ 2 HP | Technical Specifications <br> Type- Three Phase Squirrel Cage Induction Motor. <br> Rated Output Power- 2 HP (approximately 1.5 kW). <br> Rated Voltage- 400 V AC. <br> Frequency- 50 Hz. <br> Phase- Three Phase. <br> Speed- Suitable standard speed (approximately 1440 RPM or 2880 RPM as applicable). <br> Insulation Class- Class F or better. <br> Protection Class- Minimum IP55 enclosure. <br> Duty- Continuous duty (S1). <br> Mounting- Foot mounted (B3) or as required for training setup. <br> Frame- Standard industrial frame construction. <br> Cooling- Self-cooled with external fan. <br> Efficiency- IE2/IE3 efficiency preferred. <br> Terminal Box- Robust terminal box with clearly marked terminals. <br> Starting Method- Suitable for direct-on-line (DOL) starting. <br> Construction- Robust cast aluminium/cast iron body suitable for workshop use. <br> Application- Suitable for driving compressors, pumps, blowers, and other RAC training applications. <br> Accessories- Motor terminal links, mounting arrangement, and instruction manual. <br>Standard <br> Motor shall conform to IS/IEC 60034-1 (Rotating Electrical Machines - Rating and Performance). <br> Degree of protection shall conform to IS/IEC 60034-5. <br> Insulation system shall conform to IS/IEC 60085. <br> Energy efficiency shall comply with applicable IS/IEC 60034-30 requirements. | 1 | NOS | 15 |
| 137 | CHART STAND | Technical Specifications <br> Type- Portable floor-mounted chart stand. <br> Size- Approximately 6 ft height X 3 ft width. <br> Frame Material- Mild steel/aluminium tubular frame with durable finish. <br> Stand Construction- Rigid, stable, and suitable for regular institutional use. <br> Base- Strong supporting base with anti-skid arrangement. <br> Hanging Arrangement- Provided with hanging clips/clamps at top and bottom for holding charts securely. <br> Clips- Corrosion-resistant metal clips with adequate gripping strength. <br> Finish- Powder-coated/painted finish for protection against corrosion. <br> Mobility- Lightweight and easy to shift (wheels preferred, if required). <br> Application- Suitable for ITI classrooms, laboratories, workshops, and training demonstrations. <br> Workmanship- Free from sharp edges, dents, loose joints, and manufacturing defects. <br>Standard <br> Material and workmanship shall conform to good engineering practice. <br> Metal parts shall have corrosion-resistant surface treatment. | 1 | NOS | 15 |
| 138 | GRINDER | GRINDER -BENCH 150 MM WHEEL D.E. PEDESTAL- MOTORISED | 1 | NOS | 15 |
| 139 | ARGON CYLINDERS | ARGON CYLINDERS 7 CUBICMETER | 1 | NOS | 15 |
| 140 | Callipers outside with spring 15 cm | Callipers outside with spring 15 cm | 66 | NOS | 15 |
| 141 | Anvil with Stand 50 Kgs | Anvil with Stand 50 Kgs. | 1 | NOS | 15 |
| 142 | Clamps C 150mm | Clamps C 150mm Conforming to IS 9181-1988 standard.Body hot drop forged from high grade steel.All parts fully heat treated and black phosphated for long life. | 1 | NOS | 15 |
| 143 | Drift Punch Copper 15 Cm | Drift Punch Copper 15 Cm | 6 | NOS | 15 |
| 144 | Drill point angle gauge | Drill point angle gauge | 6 | NOS | 15 |
| 145 | Magnifying glass 75mm | Magnifying glass 75mm diameter with handle. | 1 | NOS | 15 |
| 146 | Multimeter digital | Multimeter digital DC 200mv - 500 V,0 - 10A & AC 200mv- 500V , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit CE compliant/certified. | 2 | NOS | 15 |
| 147 | Oil Stone 15 cm x 5 cm x 2.5 cm | Oil Stone 15 cm x 5 cm x 2.5 cm | 6 | NOS | 15 |
| 148 | Piston ring compressor | Piston ring compressor of standard quality with L type wrench having piston ring compression range minimum from 50 to 150 mm diameter. | 3 | NOS | 15 |
| 149 | Piston Ring expander and remover. | Piston Ring expander and remover made of chrome-vanadium steel or hardened alloy steel and having piston ring removing and fitting range from 40 mm to 100 mm. | 1 | NOS | 15 |
| 150 | Portable electric drill Machine 15 mm drill bit capacity | Portable electric drill Machine having minimum 15 mm drill bit capacity.Power Input - 750 W to 850 W.Drill machine must meet standard IS 4665 certification. | 1 | NOS | 15 |
| 151 | Punch Letter 4mm, Number | Punch set 4mm Letter and Number made from hardened steel or chrome-vanadium (Cr-V) steel.Letter and Number Punch sets must be supplied in two seperate boxes. | 2 | NOS | 15 |
| 152 | Scriber with scribing black universal | Scriber with scribing block universal with Adjustable Spindle 250 mm that can be tilted to any angle, allowing to easily adjust it above or below the base level. <br>V-Grooved Base - The base must be hardened and features a V-groove, which allows it to sit perfectly on curved or cylindrical surfaces. <br>Fine Adjustment Screw - A knurled screw attached to a rocker arm or swivel bracket enables precise, micro-movements of the spindle and scriber tip without needing manual forcing. <br>Guide Pins - Retractable guide pins located at the bottom of the cast-iron base can be pushed down to press against the straight edge of a Surface Plate for steady linear tracking. <br>Versatile Clamping (Snug) - The scriber is held by a snug that allows it to swivel, be positioned at any height, or be easily replaced with a Dial Test Indicator to measure run-out. | 4 | NOS | 15 |
| 153 | Set of stock and dies -Metric | Set of stock and dies -Metric made of HSS 6 to 12 mm (6 mm, 8 mm, 10 mm & 12 mm) in a box. | 2 | NOS | 15 |
| 154 | Stud remover with socket handle | Stud remover 1/2 inch drive made from hardened and tempered steel with socket handle to remove studs having diameter ranging from 6mm to 12mm. | 1 | NOS | 15 |
| 155 | Thread pitch gauge Metric | Thread pitch gauge Metric made from Stainless steel having minimum thread pitch 0.25 to 4 mm measurement capacity. | 2 | NOS | 15 |
| 156 | Universal puller for removing pulleys, bearings | Universal puller for removing pulleys, bearings | 2 | NOS | 15 |
| 157 | Vacuum gauge 0 to 760 mm of Hg. | Vacuum gauge to measure 0 to 760 mm of Hg. with flexible heavy duty pipe and attachments for vaccum measurement in a box. | 2 | NOS | 15 |
| 158 | Valve spring compressor universal | Lever type valve Lifter suitable for 100 cc to 220 cc motor cycle cylinder head. Material - Industrial-grade hardened steel with powder coating.Anti slip grip on lever. | 1 | NOS | 15 |
| 159 | Wire Gauge, metric | Wire Gauge (metric ) made of Stainless Steel having measuring capacity 1 to 36 SWG. | 1 | NOS | 15 |
| 160 | Tool Cabinet | Tool Cabinet 6.5 FEET x 3 FEET x 1.5 FEET made from steel Grey powder coated steel sheet having minimum thickness of 1.2 mm. size and minimum 4 selves.There should be transparent doors made of minimum 5 mm thick acralyc sheet having 50 mm steel sheet boarders and locks.There should be rubber pads fitted at bottom of legs of Tool Cabinet. | 2 | NOS | 15 |
| 161 | Caliper odd-leg firm joint 150 mm | Caliper odd-leg firm joint 150 mm | 13 | NOS | 15 |
| 162 | Caliper transfer inside 150 mm | Caliper transfer inside 150 mm | 3 | NOS | 15 |
| 163 | Twist Drill straight shank 3 to 12 mm by 1 mm | Twist Drill straight shank 3 to 12 mm by 1 mm | 1 | NOS | 15 |
| 164 | Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm | Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm | 1 | NOS | 15 |
| 165 | Oil Stone 12 mm sq. x 100 long fine | Oil Stone 12 mm sq. x 100 long fine | 12 | NOS | 15 |
| 166 | Chisel cold flat 20 mm X 150 mm High carbon steel | Chisel cold flat 20 mm X 150 mm High carbon steel | 4 | NOS | 15 |
| 167 | Stud Extractor EZY - out Set of 8 | Stud Extractor EZY - out Set of 8 | 2 | NOS | 15 |
| 168 | Punch number set. 3 mm | Punch number set. 3 mm | 1 | NOS | 15 |
| 169 | Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S. | Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S. | 4 | NOS | 15 |
| 170 | Hand Reamer set Taper pin straight flute Nominal Dia. 6, 8, 10, 12, 16mm | Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm | 1 | SET | 15 |
| 171 | Adjustable pipe die set | Adjustable pipe die set BSP cover pipe size 1 inch or 3/4 inch | 1 | NOS | 15 |
| 172 | Wing compass. 254 mm or 300 mm | Wing compass. 254 mm or 300 mm | 2 | NOS | 15 |
| 173 | Knurling tool, Diamond, straight and Diagonal | Knurling tool (Diamond, straight & Diagonal) | 2 | NOS | 15 |
| 174 | Indexable boring bar with inserts 1 inch shank | Indexable boring bar with inserts 1inch shank | 8 | NOS | 15 |
| 175 | Lapping plate Dia. 6 inch | Lapping plate Dia. 6 inch | 4 | NOS | 15 |
| 176 | Drill gauges | Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to <br>12.5mm, 30 holes) | 4 | SET | 15 |
| 177 | Cast Iron Globe Valve, Flanged type 150NB | Cast Iron Globe Valve (Flanged type) 150NB, Class 150 Flange - ANSI125-B16.1 | 1 | NOS | 15 |
| 178 | Stop cock 25NB | Stop cock 25NB (2-way, Threaded end) | 4 | NOS | 15 |
| 179 | Pulleys for V-belt or Flat belt to fit on 50mm dia. Shaft with key slot | Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft with key slot | 2 | NOS | 15 |
| 180 | Hollow punch Straight Shank Hollow Punch Sets 5-12mm | Hollow punch Straight Shank Hollow Punch Sets 5-12mm | 2 | NOS | 15 |
| 181 | Lifting sling 8mm Nominal Dia. Single leg sling | Lifting sling 8mm Nominal Dia. Single leg sling | 2 | NOS | 15 |
| 182 | Stake hatchet with Leg. 300 X 200 X 20 mm | Stake hatchet with Leg. 300 X 200 X 20 mm | 2 | NOS | 15 |
| 183 | Stake grooving. 100 X 100 X 300 mm | Stake grooving. 100 X 100 X 300 mm | 2 | NOS | 15 |
| 184 | Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces | Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces | 1 | NOS | 15 |
| 185 | Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs. | Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs. | 1 | NOS | 15 |
| 186 | Sine bar 125 mm | Sine bar 125 mm | 1 | NOS | 15 |
| 187 | Engineers try square knife-edge 150 mm Blade | Engineers try square (knife-edge) 150 mm Blade | 1 | NOS | 15 |
| 188 | Carbide Wear Block. 1 mm - 2 mm | Carbide Wear Block. 1 mm - 2 mm | 2 | NOS | 15 |
| 189 | Lathe tools bit. 6 mm x 75 mm | Lathe tools bit. 6 mm x 75 mm HSS/Carbide | 4 | NOS | 15 |
| 190 | Lathe tools bit. 8 mm x 75 mm | Lathe tools bit. 8 mm x 75 mm HSS/Carbide | 4 | NOS | 15 |
| 191 | Lathe tools bit. 10 mm x 75 mm | Lathe tools bit. 10 mm x 75 mm HSS/Carbide | 4 | NOS | 15 |
| 192 | Arm strong type tool bit holder. Straight | Arm strong type tool bit holder. Straight | 2 | NOS | 15 |
| 193 | Adjustable pipe chain tonge to take pipes up to 300 mm | Adjustable pipe chain tonge to take pipes up to 300 mm | 1 | NOS | 15 |
| 194 | Tweezers 100mm | 100mm | 8 | NOS | 15 |
| 195 | Crimping tool | FOR RJ45,RJ 11 | 4 | NOS | 15 |
| 196 | Power Meter | FOR FIBER OPTIC CABLE | 1 | NOS | 15 |
| 197 | Wireless Access Point | Frequency 5 GHz Frequency Band Dual-Band | 1 | NOS | 15 |
| 198 | Media Convertor | 10/100Mbps,up to 20km range | 2 | NOS | 15 |
| 199 | Vernier caliper 150 mm | Vernier caliper 150 mm | 1 | NOS | 15 |
Corresponding Contract Award Notice
No Contract Award Notice found for this tender. Please try using the Contract Award Search Page.
Sign in with Google