Supply of Tools Equipment for ITI BOQ, Non Tender - 151493020

DIRECTORATE OF EMPLOYMENT AND TRAINING has floated a tender for Supply of Tools Equipment for ITI BOQ, Non Sparking Hammers (V2) Non-Sparking Screw Driver-IS:4595 Starter Motors for IC Engines, Qty: 888. The project location is Banaskantha, Gujarat, India. The reference number is - and it is closing on 10 Nov 2026. Suppliers can request Register free of cost to get the complete Tender details and download the document.

Procurement Summary

State: Gujarat

Summary: Supply of Tools Equipment for ITI BOQ, Non Sparking Hammers (V2) Non-Sparking Screw Driver-IS:4595 Starter Motors for IC Engines, Qty: 888

Deadline: 10 Nov 2026

Posting Date: 26 Oct 2026

Other Information

Notice Type: Tender

TOT Ref.No.: 151493020

Document Ref. No.: Login to see detail

Financier: Self Financed

Purchaser Ownership: Public

Document Fees: Refer Document

Tender Value: ₹ 902248

EMD: ₹ 78

Purchaser's Detail

Name: Login to see details

Address: Login to see details

Email: Login to see details

Tender Details

Descrption: Login to see details

IMP: Login to see details

Contact Details: Login to see details Login to see details

Documents

Tender Notice

Bid_Document_10071227.pdf

Specification_Document.pdf

BOQ_Document.csv

Download All

Bill of Quantities (BOQ)

#	Title	Description	Qty	Unit	Delivery (Days)
1	BLOCKS PARALLEL ADJUSTABLE 75 X 75 X 50 MM	BLOCKS PARALLEL, ADJUSTABLE 75 X 75 X 50 MM (GROOVED AND FITTED WITH CLAMPS-HARDENED AND GROUND).-PAIR	1	pieces	21
2	FLASH POINT APPARATUS THIS APPARATUS	FLASH POINT APPARATUS THIS APPARATUS IS MADE AS PER IP 34, ASTMD-93 AND IS 1448 (PART I) 1270 (P.21) AND IS 1209-1953 METHOD B. READY TO USE.	1	pieces	21
3	STEAM GENERATOR COPPER FOR STEAM DISTILATION CAP 1000 ML	STEAM GENERATOR (COPPER) FOR STEAM DISTILATION CAP 1000 ML	2	pieces	21
4	DRAUGHTSMAN DRAWING INSTRUMENT BOX	DRAUGHTSMAN DRAWING INSTRUMENT BOX CONTAINING COMPASSES WITH PANCIL POINT ,POINT DIVIDER,INTERCHANGEABLE,DIVIDER SPRING BOW,PEN SPRING BOW LENDTHENING BAR,PEN DRAWING LINER,SCREW INSTRUMENT, TUBE WITH LEADS.	12	pieces	21
5	DUMPY LEVEL BUILDER 25 CM LOCAL LENGTH X 23 MM COMPLETE WITH BOX	DUMPY LEVEL BUILDER 25 CM LOCAL LENGTH X 23 MM COMPLETE WITH BOX AND ACCESSORIES AND STAND.	1	pieces	21
6	SET SQUARE CELLULIOD 45 DEGREE 8 INCH	SET SQUARE CELLULIOD 45 DEGREE -8 INCH	14	pieces	21
7	TELESCOPIC ALIDADE	TELESCOPIC ALIDADE High Precision Surveying	1	pieces	21
8	DRAFTING TABLE WITH CONUGATED BOARD 150 CMX90 CMX90 CM	DRAFTING TABLE WITH CONUGATED BOARD (150 CMX90 CMX90 CM)	2	pieces	21
9	FINGER THIMBLES-STEEL	FINGER THIMBLES-STEEL	4	pieces	21
10	AC STARTER RESISTANCE TYPE STARTER	AC STARTER RESISTANCE TYPE STARTER	1	pieces	21
11	BRAKE TEST ARRANGEMENT WITH TWO SPRING BALANCE OF 0 TO 25 KG RATING	BRAKE TEST ARRANGEMENT WITH TWO SPRING BALANCE OF 0 TO 25 KG RATING	1	pieces	21
12	CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQMM	CRIMPING TOOL FOR CRIMPING 16 SQ MM TO 95 SQ.MM	2	pieces	21
13	DRILL HAND BRACE 0 TO 100 MM	DRILL HAND BRACE 0 TO 100 MM	5	pieces	21
14	DRILLING MACHINE HAND 0 TO 6 MM CAPACITY	DRILLING MACHINE HAND 0 TO 6 MM CAPACITY	2	pieces	21
15	ELECTRIC IRON 1200 W 230 V WITH TEMPRATURE CONTROL	ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL.	2	pieces	21
16	FUNCTION GENERATOR 2 TO 200 KHZ	FUNCTION GENERATOR 2 TO 200 KHZ, SINE, SQUARE, TRIANGULAR 220 V, 50 HZ, SINGLE PHASE	1	pieces	21
17	GREESE PRESSURE GUN HAND	GREESE PRESSURE GUN (HAND)	1	pieces	21
18	HAMMER CROSS PEIN 250 GRAMS WITH HANDLE.	HAMMER CROSS PEIN 250 GRAMS WITH HANDLE.	36	pieces	21
19	HAMMER EXTRACTOR TYPE 0.250 KG WITH HANDLE	HAMMER EXTRACTOR TYPE 0.250 KG. WITH HANDLE	3	pieces	21
20	LABORATORY TYPE INDUCTION COIL 1000W	LABORATORY TYPE INDUCTION COIL 1000W	5	pieces	21
21	MALLET HARD WOOD 0.50 KG.	MALLET HARD WOOD 0.50 KG.	2	pieces	21
22	PLANE JACK 200MM X 50 MM	PLANE- JACK 200MM X 50 MM	1	pieces	21
23	PLANE SMOOTHING METAL 200 MM X 50 MM CUTTER	PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER	2	pieces	21
24	PLIER ROUND NOSE 100 MM INSULATED	PLIER ROUND NOSE 100 MM	4	pieces	21
25	PUNCH CENTRE 150 MM X 9 MM DIA KNURLED BODY	PUNCH CENTRE 150 MM X 9 MM DIA.--KNURLED BODY	42	pieces	21
26	SCREW DRIVER INSULATED 4 MM X 100 MM	SCREW DRIVER INSULATED 4 MM X 100 MM	42	pieces	21
27	SERIES TYPE OHM METER 0 to 2000 APPROXIMATE	SERIES TYPE OHM METER 0-2000 APPROXIMATE	2	pieces	21
28	SHADED POLE MOTOR FRACTIONAL HP 240 V 50 HZ	SHADED POLE MOTOR FRACTIONAL HP, 240 V, 50 HZ	2	pieces	21
29	SHUNT TYPE OHM METER 0 to 2000 APPROXIMATE	SHUNT TYPE OHM METER 0-2000 APPROXIMATE	2	pieces	21
30	SNIP STRAIGHT 250 MM	SNIP STRAIGHT 250 MM	1	pieces	21
31	SOLDERING IRON COPPER BIT 0.25 KG.	SOLDERING IRON COPPER BIT 0.25 KG.	2	pieces	21
32	SOLDERING IRON EXCHANGABLE COPPER TIP 65 WATT	SOLDERING IRON EXCHANGABLE COPPER TIP 65 WATT	1	pieces	21
33	SPANNERS DOUBLE ENDED OPEN SET OF 12 METRIC SIZES 6 TO 32 MM	SPANNERS DOUBLE ENDED OPEN SET OF 12 METRIC SIZES 6 TO 32 MM	1	pieces	21
34	TECHOMETER OR REVOLUTION COUNTER WITH STOP WATCH	TECHOMETER OR REVOLUTION COUNTER WITH STOP WATCH	2	pieces	21
35	TEMPRETURE CONTROLLED SOLDERING IRON 50W 230 V	TEMPRETURE CONTROLLED SOLDERING IRON 50W, 230 V	2	pieces	21
36	VARIABLE AUTO TRANSFORMER 0 to 270V 5A to 10A SINGLE PHASE	VARIABLE AUTO TRANSFORMER 0 - 270V 5A -10A SINGLE PHASE	2	pieces	21
37	VOLTMETER CENTRE ZERO 100 0 100 MV	VOLTMETER CENTRE ZERO 100-0-100 MV	2	pieces	21
38	CALIPER INSIDE SPRING 15 CM	CALIPER INSIDE SPRING 15 CM	13	pieces	21
39	SPANNER WRENCH ADJUSTABLE 150 MM	SPANNER/WRENCH ADJUSTABLE 150 MM	3	pieces	21
40	RULE STEEL 30 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	RULE STEEL 30 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	63	pieces	21
41	GROWLER	GROWLER for Electrician / Wireman / Auto Electrical Lab	9	pieces	21
42	KNIFE DOUBLE BLADED ELECTRICIAN 100 MM	KNIFE DOUBLE BLADED ELECTRICIAN 100 MM	63	pieces	21
43	LINE TESTER 5OO VOLT HEAVY DUTY ELECTRIC TESTING	LINE TESTER 5OO VOLT HEAVY DUTY (ELECTRIC TESTING)	64	pieces	21
44	CALIPER OUTSIDE SPRING 15 CM	CALIPER OUTSIDE SPRING 15 CM	3	pieces	21
45	DIVIDER SPRING 15 CM	DIVIDER SPRING 15 CM	6	pieces	21
46	DIGITAL LUX METER LCD READ OUT 0.05 TO 7000 LUMENS WITH BATTERY	DIGITAL LUX METER LCD READ OUT 0.05 TO 7000 LUMENS WITH BATTERY.	2	pieces	21
47	DESOLDERING PUMP ELECTRICALLY HEATED MANUALLY OPERATED 230 V 40W	DESOLDERING PUMP ELECTRICALLY HEATED MANUALLY OPERATED 230 V 40W	12	pieces	21
48	DIMMER STARTER 3 AMP	DIMMER STARTER 3 AMP	2	pieces	21
49	LED LIGHTING SYSTEM MEASUREMENT	LED LIGHTING SYSTEM MEASUREMENT OF POWER, VOLTAGE, CURRENT, POWER FACTOR AND LIGHT OUTPUT PERFORMANCE OF DIFFERENT LIGHTING PRODUCTS LIKE LED, CFL AT VARIABLE INPUT VOLTAGES 0 TO 245V VARIABLE AC	2	pieces	21
50	RADIO RECEIVER SET AM FM	RADIO RECEIVER SET AM FM	2	pieces	21
51	WIRELESS COMMUNICATION MODULES FOR INTERFACING	WIRELESS COMMUNICATION MODULES FOR INTERFACING WITH <br>as per specification	1	pieces	21
52	BLOCKS VEE 150 X 100 X 100 MM	BLOCKS VEE 150 X 100 X 100 MM.	1	pieces	21
53	BORING BAR INDEXABLE WITH INSERT 1 inch SHANK	BORING BAR INDEXABLE WITH INSERT 1 inch SHANK	24	pieces	21
54	CALIPER HERMACHRODITE.SPRING 15 CM	CALIPER HERMACHRODITE.SPRING 15 CM	12	pieces	21
55	CARBIDE WEAR BLOCK 1 MM-2 MM.	CARBIDE WEAR BLOCK 1 MM-2 MM.	1	pieces	21
56	CHISEL DIAMOND POINT 9 X 150 MM	CHISEL DIAMOND POINT 9 X 150 MM	10	pieces	21
57	CLAMP or VICE TOOL MAKER 5 CM AND 7.5CM SET OF 2	CLAMP/VICE TOOL MAKER 5 CM AND 7.5CM SET OF 2.	3	pieces	21
58	COMPARATOR STAND WITH DIAL INDICATOR	COMPARATOR STAND WITH DIAL INDICATOR.	1	pieces	21
59	EXTRACTORS SCREW or STUD SIZES 1 TO 8 SET	EXTRACTORS -SCREW/STUD SIZES 1 TO 8 -SET	1	pieces	21
60	GAUGE PLUG SINGLE ENDED 5 TO 55 BY 1 MM	GAUGE PLUG SINGLE ENDED 5 TO 55 BY 1 MM.	2	pieces	21
61	GAUGE SNAP GO AND NO GO 25 TO 50 MM BY 5 MM	GAUGE -SNAP GO AND NO GO 25 TO 50 MM BY 5 MM.	1	pieces	21
62	HAMMER PLANISHING WITH HANDLE	HAMMER PLANISHING WITH HANDLE	2	pieces	21
63	INTERCHANGEABLE RATCHET SOCKET SET	INTERCHANGEABLE RATCHET SOCKET SET WITH A 12 MM DRIVER SIZE 10 TO 32 MM SET OF 18 SOCKET AND ATTACHMENT	1	pieces	21
64	KNURLING TOOL DIAMOND STRAIGHT and DIAGONAL	KNURLING TOOL (DIAMOND, STRAIGHT & DIAGONAL)	4	pieces	21
65	LAPPING PLATE 6 inch DIA	LAPPING PLATE 6 INCH DIA	12	pieces	21
66	MALLET DIA 100 MM X 150 MM	MALLET. DIA 100 MM X 150 MM	1	pieces	21
67	METAL RACK 180 X 150 X 45 CM SLOTTED ANGLE	METAL RACK 180 X 150 X 45 CM SLOTTED ANGLE	2	pieces	21
68	MORSE TAPER SLEEVES NO. 0TO1, 1TO2,2TO3,3TO4,4TO5,	MORSE TAPER SLEEVES NO. 0TO1, 1TO2,2TO3,3TO4,4TO5,	1	pieces	21
69	POKER 900 MM LONG	POKER - 900 MM LONG	2	pieces	21
70	PULLER SET UNIVERSAL BEARING AND BUSHES	PULLER SET UNIVERSAL BEARING AND BUSHES	6	pieces	21
71	PUNCH DOT SLOT DIA 10 X 100 MM	PUNCH DOT SLOT . DIA 10 X 100 MM	5	pieces	21
72	RULE STEEL 15 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	RULE STEEL 15 CM GRADUATED BOTH ENGLISH AND METRIC UNITS	21	pieces	21
73	SOLDERING IRON 250 W WOODEN HANDLE	SOLDERING IRON 250 W WOODEN HANDLE	1	pieces	21
74	SPANNER WRENCH ADJUSTABLE 380 MM	SPANNER WRENCH ADJUSTABLE 380 MM IS 1649	2	pieces	21
75	STAKE GROOVING 100 X 100 X 300 MM	STAKE GROOVING. 100 X 100 X 300 MM	1	pieces	21
76	STAKE HATCHET WITH LEG 300 X 200 X 20 MM	STAKE HATCHET WITH LEG 300 X 200 X 20 MM	3	pieces	21
77	SURFACE ROUGHNESS COMPARISON PLATES N1 and N12 GRADES	SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES	2	pieces	21
78	TELESCOPIC GAUGE RANGE 8 to 150 MM SET OF 6 PCS	TELESCOPIC GAUGE RANGE 8-150 MM (SET OF 6 PCS)	1	pieces	21
79	TOOL BIT HOLDER AS ARMSTRONG STRAIGHT	TOOL BIT HOLDER AS ARMSTRONG STRAIGHT.	3	pieces	21
80	HAMMER BALL PEIN 500 GRAMS 1 LB WITH HANDLE	HAMMER BALL PEIN 500 GRAMS 1 LB WITH HANDLE	19	pieces	21
81	HAMMER BALL PEIN 250 GRAMS WITH HANDLE	HAMMER BALL PEIN 250 GRAMS WITH HANDLE	35	pieces	21
82	POWER METER	POWER METER	2	pieces	21
83	SMPS TESTER	SMPS TESTER	1	pieces	21
84	AUTO TRANSFORMER 3 PHASE INPUT 230 V OUTPUT 0- 270 V	AUTO TRANSFORMER 3 PHASE INPUT 230 V, OUTPUT, 0- 270 V	1	pieces	21
85	DIGITAL PANEL METERS 3.5 DIGIT	DIGITAL PANEL METERS 3 1/2 DIGIT	6	pieces	21
86	EXPERIMENTAL SETUP FOR ONLINE DISSOLVED OXYGEN MEASUREMENT	EXPERIMENTAL SETUP FOR ONLINE DISSOLVED OXYGEN MEASUREMENT	1	pieces	21
87	SIMPLE TANK TYPE QUANTITY METER	SIMPLE TANK TYPE QUANTITY METER .	1	pieces	21
88	TRAINERS ON RS 485 TO RS232 CONVERTOR	TRAINERS ON RS 485 TO RS232 CONVERTOR	1	pieces	21
89	FUEL INJECTION PUMP DISMANTLING TOOL KIT	FUEL INJECTION PUMP DISMANTLING TOOL KIT	1	pieces	21
90	MARKING OUT TABLE 90 X 60 X 90 CM	MARKING OUT TABLE 90 X 60 X 90 CM	2	pieces	21
91	PIPE CUTTER SET 3 WHEEL TYPE 75 mm PIPE	PIPE CUTTER SET, 3 WHEEL TYPE 3 inch PIPE	1	pieces	21
92	SNIP RIGHT CUT 250 MM	SNIP RIGHT CUT 250 MM	2	pieces	21
93	TAP SET METRIC 2 TO 10 MM SET OF 9 PCS WITH WRENCH	TAP SET METRIC 2 TO 10 MM (SET OF 9 PCS) WITH WRENCH	1	pieces	21
94	VICE HAND 37 MM	VICE HAND 37 MM	2	pieces	21
95	PUNCH HOLLOW 6 MM TO 15 SET OF 7	PUNCH HOLLOW 6 MM TO 15 SET OF 7	3	pieces	21
96	AC ALTERNATOR SLIP RING PULLER VARIABLE	AC ALTERNATOR SLIP RING PULLER VARIABLE	1	pieces	21
97	AIR IMPACT WRENCH WITH STANDARD ACCESSORIES	AIR IMPACT WRENCH WITH STANDARD ACCESSORIES	3	pieces	21
98	ALLEN KEY SET -HEXAGONAL 2 TO 14 MM 12 PIECES	ALLEN KEY SET -HEXAGONAL - 2 TO 14 MM 12 PIECES	3	pieces	21
99	ANVIL 50 KGS WITH STAND	ANVIL 50 KGS WITH STAND	1	pieces	21
100	CUT SECTION MODELS OF SHOCK ABSORBERS	CUT SECTION MODELS OF SHOCK ABSORBERS	1	pieces	21
101	EXTRACTORS STUD SET OF 3	EXTRACTORS -STUD SET OF 3	1	pieces	21
102	FILES ASSORTED SIZES AND TYPES INCLUDING SAFE EDGE FILE SET OF 20 NOS	FILES ASSORTED SIZES AND TYPES INCLUDING SAFE EDGE FILE SET OF 20 NOS <br>Specification A set of 20 workshop hand files of assorted types sizes and cuts including Flat Half Round Round, Square Triangular Knife Edge and Safe Edge Files	2	pieces	21
103	FUEL FEED PUMP FOR DIESEL	FUEL FEED PUMP FOR DIESEL	2	pieces	21
104	GREASE GUN SMALL SIZE	GREASE GUN (SMALL SIZE).	1	pieces	21
105	HAMMER PLASTIC 0.25 KGS. WITH HADLE	HAMMER PLASTIC 0.25 KGS. WITH HADLE.	1	pieces	21
106	OIL PUMP FOR DISMENTLING AND ASSEMBLING	OIL PUMP FOR DISMENTLING AND ASSEMBLING	1	pieces	21
107	PHILIPS SCREW DRIVER SET OF 5 PIECES 100MM - 300MM	PHILIPS SCREW DRIVER SET OF 5 PIECES 100MM - 300MM	17	pieces	21
108	PHILIPS SCREW DRIVER SET OF 5 PIECES 100MM - 300MM POZIDRIVANDTORX DRIVE	PHILIPS SCREW DRIVER SET OF 5 PIECES 100MM - 300MM (POZIDRIVANDTORX DRIVE)	6	pieces	21
109	PISTON RING COMPRESSOR	PISTON RING COMPRESSOR	1	pieces	21
110	PISTON RING EXPANDER AND REMOVER	PISTON RING EXPANDER AND REMOVER	2	pieces	21
111	PLIER VICE GRIP	PLIER VICE GRIP	1	pieces	21
112	SCREW DRIVER ELECTRICIAN 250 MM THIN STEM INSULATED HANDLE MAGNETIC POINT	SCREW DRIVER ELECTRICIAN 250 MM THIN STEM INSULATED HANDLE MAGNETIC POINT	15	pieces	21
113	SPANNER MEGNETO SET OF 8 SPANNERS	SPANNER -MEGNETO SET OF 8 SPANNERS	2	pieces	21
114	CPVC or UPVC PIPE CUTTER UPTO 50 MM	CPVC/UPVC PIPE CUTTER UPTO 50 MM	9	pieces	21
115	GIRMALE	GIRMALE.	1	pieces	21
116	HYDRAULIC PRESSURE MACHINES FOR TESTING LEAKAGE IN GI PIPE FITTINGS ETC	HYDRAULIC PRESSURE MACHINES FOR TESTING LEAKAGE IN GI PIPE FITTINGS ETC.	1	pieces	21
117	SOIL POT WITH BRUSH.	SOIL POT WITH BRUSH.	1	pieces	21
118	SOLDERING COPPER HATCHET TYPE 500 GMS	SOLDERING COPPER HATCHET TYPE 500 GMS	2	pieces	21
119	STILSON WRENCHES 20 CM.LONG	STILSON WRENCHES 20 CM.LONG	8	pieces	21
120	TOOL CAULKING SET OF 2	TOOL CAULKING SET OF 2.	5	pieces	21
121	BRUSH LESS DC MOTOR BLDC CONTROLLER 15 to 30 WATTS 315 VOLT DC TRAINER KIT	BRUSH LESS DC MOTOR BLDC CONTROLLER 15 to 30 WATTS 315 VOLT DC	1	pieces	21
122	CIRCULATING WATER PUMP SMALL 0.5 H.P WITH SS TANK	CIRCULATING WATER PUMP (SMALL) 0.5 H.P WITH STAINLESS STEEL TANK CAPACITY 20 LITERS WITHIN LET/ OUTLET PROVISION.	1	pieces	21
123	DECIBEL METER 30 to 100 DB	DECIBEL METER 30-100 DB	1	pieces	21
124	DESCALLING PUMP SET	DESCALLING PUMP SET WITH STAINLESS STEEL IMPELLER and HOUSING COMPLETE WITH MOTOR 0.5 H.P. with ACCESSORIES	1	pieces	21
125	DRY N2 IN CYLINDER WITH 2 STAGE REGULATOR	DRY N2 IN CYLINDER WITH 2 STAGE REGULATOR OR COMMERCIAL N2 IN CYLINDER WITH DRIER UNIT AND 2 STAGE REGULATOR.	1	pieces	21
126	ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A HC R-22	ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22	2	pieces	21
127	FIN STRAIGHTENED or FIN COMB WITH STRONG STEEL WIRE BASED COMBING ON WOOD	FIN STRAIGHTENED/FIN COMB. WITH STRONG STEEL WIRE BASED COMBING ON WOOD	3	pieces	21
128	FLARING TOOL SET SINGLE TYPE FOR TUBE 4.7 TO 16 MM OD	FLARING TOOL SET SINGLE TYPE FOR TUBE 4.7 TO 16 MM OD.	2	pieces	21
129	METAL RACK 1820 X 1210 X 450 MM	METAL RACK 1820 X 1210 X 450 MM	1	pieces	21
130	MOTOR SPLIT PHASE MOTOR 1 H.P. SINGLE PHASE 230 V	MOTOR - SPLIT PHASE MOTOR 1 H.P. SINGLE PHASE 230 V	1	pieces	21
131	MOTOR AC SINGLE PHASE 230 V, 50 CYCLES CAPACITOR TYPE WITH STARTER SWITCH 1 HP	MOTOR AC SINGLE PHASE 230 V, 50 CYCLES CAPACITOR TYPE WITH STARTER SWITCH 1 HP.	1	pieces	21
132	PIERCING VALVES WITH ACCESS FITTINGS 1 by 4 inch	PIERCING VALVES WITH ACCESS FITTINGS 1 by 4 inch	2	pieces	21
133	PIPE CUTTER WITH BUILT IN REAMER AND SPARE CUTTER FOR COPPER TUBE 3 TO 32 MM	PIPE CUTTER WITH BUILT IN REAMER AND SPARE CUTTER FOR COPPER TUBE 3 TO 32 MM	1	pieces	21
134	PORTABLE AIR LPG BRAZING KIT	PORTABLE-AIR LPG BRAZING KIT WITH 2 KG LPG CYLINDER, TORCHES, HOSES, STANDARD MAKE WITH STRAIGHT FLAME	1	pieces	21
135	PUNCH HOLE FOR CUTTING GASKET 4.7 TO 16 MM DIA	PUNCH HOLE FOR CUTTING GASKET 4.7 TO 16 MM DIA	1	pieces	21
136	PUNCH ROUND 3 MM 4MM AND 6MM DIA EACH	PUNCH ROUND 3 MM , 4MM & 6MM DIA EACH	1	pieces	21
137	QUICK COUPLES PROCESS TUBE ADOPTER 1 by 4 nich	QUICK COUPLES PROCESS TUBE ADOPTER 1 by 4 nich	4	pieces	21
138	QUICK COUPLES PROCESS TUBE ADOPTER 3 by 8 inch	QUICK COUPLES PROCESS TUBE ADOPTER 3 by 8 inch	4	pieces	21
139	REFRIGERANT CYLINDER 10 KG CAPACITY	REFRIGERANT CYLINDER 10 KG CAPACITY	1	pieces	21
140	SERVICE OSCILLATOR	SERVICE OSCILLATOR.	1	pieces	21
141	TABLE FOR ARC WELDING ALL METAL WITH POSITIONER 120 CM X 120 CM X 75 CM	TABLE FOR ARC WELDING ALL METAL WITH POSITIONER 120 CM X 120 CM X 75 CM	1	pieces	21
142	CURRENT METER	CURRENT METER	1	pieces	21
143	HEIGHT INDICATORS SURVEY OF INDIA PATTERN	HEIGHT INDICATORS (SURVEY OF INDIA PATTERN)	2	pieces	21
144	LEVELING STAFF 4 MTR READING TO 5MM TELESCOPIC TYPE	LEVELING STAFF 4 MTR READING TO 5MM, TELESCOPIC TYPE	4	pieces	21
145	RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG	RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG.	4	pieces	21
146	CALIPER TRANSFER INSIDE 15 CM	CALIPER TRANSFER INSIDE 15 CM	3	pieces	21
147	CENTRE GAUGE COMBINED 60 55 AND 29 DEGREE	CENTRE GAUGE COMBINED. 60, 55 AND 29 DEGREE	1	pieces	21
148	COLLAPSIBLE TAP WITH ATTACHMENT	COLLAPSIBLE TAP WITH ATTACHMENT	1	pieces	21
149	KNURLING TOOL REVOLVING HEAD ROUGH MED FINE DIAMOND AND STRAIGHT	KNURLING TOOL REVOLVING HEAD (ROUGH, MED, FINE) DIAMOND AND STRAIGHT	1	pieces	21
150	LATHE MANDRELS DIFF TYPES	LATHE MANDRELS(DIFF.TYPES)	1	pieces	21
151	MARKING OFF TABLE 1200 X 1200 X 900 MM HIGH	MARKING OFF TABLE 1200 X 1200 X 900 MM HIGH	1	pieces	21
152	COIL TESTER	COIL TESTER.	1	pieces	21
153	DIOMAND CUTTER 150 MM	DIOMAND CUTTER 150 MM.	6	pieces	21
154	PLIER SQUARE NOSE 150 MM	PLIER SQUARE NOSE ,150 MM	3	pieces	21
155	HAMMER SLEDGE DOUBLE FACED 4 KG	HAMMER SLEDGE DOUBLE FACED 4 KG	1	pieces	21
156	MULTI ANGLE MAGNETIC CLAMP SET METAL BASE 18 X10 X 10 CM	MULTI ANGLE MAGNETIC CLAMP SET (METAL BASE 18 X10 X 10 CM)	1	pieces	21
157	SWAGGING AND FLOORING TOOL KIT 45 DEGREE TUBING 1 by 8 TO 3 by 4 INCH	SWAGGING AND FLOORING TOOL KIT 45 DEGREE TUBING 1 by 8 TO 3 by 4 INCH	1	pieces	21
158	D.C. SERIES MOTOR WITH 2 POINT STARTER 3 HP 250 V WITH 3 POINT STARTER	D.C. SERIES MOTOR WITH 2 POINT STARTER 3H.P 250 V WITH 3 POINT STARTER & SPEED REGULATOR(LABORATORY TYPE)	1	pieces	21
159	FOOT PRINT GRIP 250 MM	FOOT PRINT GRIP 250 MM	2	pieces	21
160	HAMMER CROSS PEIN 500 GRAMS WITH HANDLE	HAMMER CROSS PEIN 500 GRAMS WITH HANDLE	2	pieces	21
161	MALLET BARWOOD 1 KG 75 MM X 15 MM	MALLET BARWOOD 1 KG. (75 MM X 15 MM)	21	pieces	21
162	MULTIMETER 0 TO 1000 M OHMS 2.5 TO 5000 VOLT	MULTIMETER 0 TO 1000 M OHMS 2.5 TO 5000 VOLT	3	pieces	21
163	SCREW DRIVER ELECTRICIAN CONNECTOR, 100 MM INSULATED HANDLE THIN STEM	SCREW DRIVER -ELECTRICIAN CONNECTOR, 100 MM. INSULATED HANDLE THIN STEM	21	pieces	21
164	SCREW DRIVER TERMINAL 75 MM CONNECTOR TYPE	SCREW DRIVER -TERMINAL 75 MM (CONNECTOR)	20	pieces	21
165	TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS	TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS	3	pieces	21
166	WALL JUMPER OCTAGONAL 37MMX450MM AND 37X600 MM	WALL JUMPER OCTAGONAL 37MMX450MM AND 37X600 MM	4	pieces	21

Corresponding Contract Award Notice

No Contract Award Notice found for this tender. Please try using the Contract Award Search Page.

Browse More

All Tenders From Gujarat

All Tenders From India

Tenders By City

Tenders By Authority

Tender Notice	Download
Bid_Document_10071227.pdf	Download
Specification_Document.pdf	Download
BOQ_Document.csv	Download

Contract Award Notice	Download
Bid_Document_10071227.pdf	Download
Specification_Document.pdf	Download
BOQ_Document.csv	Download

OR

OR

Thank You!

Supply of Tools Equipment for ITI BOQ, Non Tender - 151493020

Bill of Quantities (BOQ)