Providing & Fixing Minimum 29mm Thick Hermetically Tender - 95342886

Procurement Summary

State: Tamil Nadu

Summary: Providing & Fixing Minimum 29mm Thick Hermetically Sealed Double Glass (DGU)

Deadline: 26 Jan 2024

Posting Date: 17 Jan 2024

Other Information

Notice Type: Tender

TOT Ref.No.: 95342886

Document Ref. No.:

Financier: Self Financed

Purchaser Ownership: Public

Document Fees: Refer Document

Tender Value: Refer Document

EMD: ₹ 5000000

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Tender Are Invited Providing & Fixing Minimum 29mm Thick Hermetically Sealed Double Glass (DGU) Consisting Of Fire Resistant Glass Of Minimum 11mm Thick Or More, Clear, Toughened, Borosilicate Glass, 120 Minutes Fire Rated For Both Integrity & Radiation Control, Remain Transparent Under Both Fireand Non Fire Condition And 6mm Thick Toughened Tinted Glass With 7mm Gap. The Partitions Shall Be 120 Minutes Fire Rated, Fully Glazed Non Load Bearing Fixed Partition With Valid Fire Test Certificate From National Or International Lab With Partition Frame Manufactured From 1.6 Mm Galvanized Steel Sheet (Zinc Coating Not Less Than 120 Gm/Sqm) Pressed To Form A Suitable Profile To Accomodate The Glass & Fixed To The Supporting Construction By Means Of M 10 X 120 Or Bigger Steel Bolts At 150 Mm From The Edges & Every 500mm C/C .The Frame Shall Be Finished With Etch Primer For Scratch Resistance And Shall Be Powder Coated Of Min. 30 Micron Of Approved Shade And Color. The Glass Panels Shall Be Interlayered Minimum 11mm Thick, 120 Minute Fire Rating And Partially Insulated (EW120), With 15 Minute Full Insulation, Non Wired Toughened Interlayered Or Monolithic Glass Having A Sound Reduction Of Greater Than 37db, Light Transmission Of 87% And Compliant To Class 1(B)1 Category Of Impact Resistance As Per EN 12600. The Glass Should Be Manufactured In UL & TUV Audited Facility And Including UL-EU Certification. The Glass Shall Be Held In Position With Minimum 1.6 Mm G.I Beading, Clamped Or Bolted To The Frame Profile By 4mm X 35mm Steel Screws At Every 250 Mm C/C And A Ceramic Tape Of Cross Section Of 5mm X 20mm On Both Sides Of The Glass. All Frame Shall Be Finished Polyster Powder Coated To Minimum 50microns, Of Approved Colour. Test Certificates Should Be Made Available For A Complete Assembly.The Item Shall Include Intumescent Putty And Fire Resistant Acrylic Sealants And The Total Assembly Shall Satisfy The Fire Resistance Criteria Of Stability, Integrity & Radiation Control And Partial Insulation (EW120) All Complete As Per Specification. Shop Drawings For The Item With All Construction And Anchoring Details Along With Fire Rating Test Reports Shall Be Got Approved From Engineer-In-Charge Before Execution. SQM .0010729
Qty.:-120
EMD VALUE :- 5000000

Documents

 Tender Notice