High Tensile Hex Head Partially Threaded Bolt Tender - 141392007

NORTH WESTERN RAILWAY has floated a tender for High Tensile Hex Head Partially Threaded Bolt of Size M18x70 Mm, Pitch 2 Mm (Coarse), Length of Thread 38.40 Mm Grade 10.9 or Higher with Two Plain Washer of Id 17 Mm, Od 30Mm & Thickness 3Mm; One Spri.... The project location is Ajmer, Rajasthan, India. The reference number is 46265126 and it is closing on 08 Jun 2026. Suppliers can request Register free of cost to get the complete Tender details and download the document.

Procurement Summary

State: Rajasthan

Summary: High Tensile Hex Head Partially Threaded Bolt of Size M18x70 Mm, Pitch 2 Mm (Coarse), Length of Thread 38.40 Mm Grade 10.9 or Higher with Two Plain Washer of Id 17 Mm, Od 30Mm & Thickness 3Mm; One Spri...

Deadline: 08 Jun 2026

Posting Date: 16 May 2026

Other Information

Notice Type: Tender

TOT Ref.No.: 141392007

Document Ref. No.: 46265126

Financier: Self Financed

Purchaser Ownership: Public

Document Fees: Refer Document

Tender Value: Refer Document

EMD: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Tender Details

High tensile hex head partially threaded bolt of size M18X70 mm, pitch 2 mm (coarse), length of thread 38.40 mm grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer ID 16 mm, OD 25 mm & thickness 3 mm;and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from free end. (Note: Supplier should provide material duly tested for load as per IS 1367)

High tensile hex head partially threaded bolt of size M18X70 mm, pitch 2 mm (coarse), length of thread 38.40 mm grade 10.9 or higher with two plain washer of ID 17 mm, OD 30mm & thickness 3mm; one spring washer I D 16 mm, OD 25 mm & thickness 3 mm;and two hex nut, confirming to IS 1364 for nut and bolt; IS 3063 for washer, along with split pin of size 3x50 mm confirming to IS 549. Split pin hole of dia 3.3 mm at a distance of 5 mm from fre e end. (Note: Supplier should provide material duly tested for load as per IS 1367) [ Warranty Period: 30 Months af ter the date of delivery ] ]

Contract Category: Expenditure
Contract Type : Goods

Tender Type : Open - Indigenous

Contract Category : Expenditure

Evaluation Criteria : Itemwise/Consigneewise

Bidding System : Single Packet

Pre-Bid Conference Required : No

Pre-Bid Conference Date Time : Not Applicable

Tendering Section : LP

Inspection Agency : CONSIGNEE

Publishing Date / Time : 15/05/2026 11:51 Item Category General

Procure From Approved Sources : No

Approving Agency : Not Applicable

Closing Date Time : 08/06/2026 14:25

Validity of Offer ( Days) : 90

Ranking Order for Bids : Lowest to Highest

Advertised Value :

Tender Doc. Cost (INR) : 0.00

Earnest Money (INR) : 0.00
Consignee SSE/TECHNIC.CELL/AII, NWR Rajasthan 250.00 Numbers