Expired Tender Namibia ICB TOT Ref. 68338780

Constructions of 2 Classrooms with 2 Storerooms Tender - 68338780

Tender notice from Namibia, published on 30 Jun 2022.

Executive Summary

The ERONGO REGIONAL COUNCIL has issued a Tender notice for the procurement of a Constructions of 2 Classrooms with 2 Storerooms at High Hope PS in the Namibia. This Tender notice was published on 30 Jun 2022 and is scheduled to close on 21 Jul 2022, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 68338780, while the tender notice number is W/RFQ/ERC - 020/2021/2022 and Register on the platform.

Key facts

Summary
Constructions of 2 Classrooms with 2 Storerooms at High Hope PS
TOT Ref. No.
68338780
Document Ref. No.
W/RFQ/ERC - 020/2021/2022
Country
Namibia
Notice type
Tender
Competition
ICB
Publication date
30 Jun 2022
Bid deadline
21 Jul 2022
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Self Financed

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Quotation are invited for Constructions of 2 Classrooms with 2 Storerooms at High Hope PS in Walvisbay.

Directorate of Education, Arts & Culture.
ITEM NO. BRIEF DESCRIPTION OF WORKS QTY UNIT OF MEASURE

1 EARTH WORKS

1.1. Excavation in earth not exceeding lm deep: trenches and holes. 42 m*

1.2. Compacting of ground surface including scarifying for a depth of 150 mm, breaking down oversize material adding suitable material where necessary and compacting to 93% mod AASHTO density. 146.2 m2

1.3. Soil insecticide to bottom of trenches, holes. 50 m2

1.4 Soil insecticide under floors, pavings, etc including forming and poisoning shallow furrows against foundation walls etc, filling in furrows and ramming. 157.2 m2

1.5. Backfilling of trenches and holes. 21 m3

1.6. Earth fillings obtained from excavations and / or prescribed stock piles on site compacted to 93% Mod AASHTO density backfilling behind retaining walls, under floors, steps and apron. 60 m3

1.7 Coarse river sand filling supplied by the contractor under floors etc. 30 m3

1.8 Clearing surplus materials from excavations/stock piles on site to a dumping site. 4 m3

Total
2 DUMP PROOFING OF FLOORS AND WALLS

2.1 One layer of approved 250 micron under surface bed type waterproof sheeting sealed at laps with pressure sensitive tape to sides and bottoms of trenches and holes 228 m2

2.2 One layer of approved 250 micron under surface bed type waterproof sheeting sealed at laps with pressure sensitive tape under surface beds, aprons, etc. 242 m2

2.3. One layer of approved 375 micron embossed damp course in walls (110 mm and 220mm wide) 62.2 m2

Total
3. CONCRETE WORK (UNREINFORCED AND REINFORCED)

3.1 Making and testing 150x150x150mm concrete strength test cube 8 No.

3.2 30MPa/19mm concrete footings, bases and ground beams. 17 m3

3.3 25MPa/19mm concrete: surface beds cast in panels. 20 m3

3.4 Finishing top surfaces of concrete smooth surface beds. With a wood float. 160 m2

3.5 Expansion joints with 10mm thick closed cell polyethylene between vertical concrete or bricks surfaces: joints not exceeding 300mm wide 50 m

Total
NO. MEASURE

4 BRICKWORK IN FOUNDATION

4.1 Brickwork of 14MPa cement bricks in class 1 mortar: half brick wall 52 m2

4.2 Brickwork of 7MPa cement bricks in class 1 mortar: half brick wall 76 m2

Total
5 GALVANISED BRICK REINFORCEMENT

5.1 150mm Wide reinforcement built in horizontally (extra for brick lintels or bands) 954 m

5.2 75mm Wide reinforcement built in horizontal (extra for brick lintels or bands) 156 m

Total
6 BRICKWORK IN SUPERSTRUCTURE

6.1 Brickwork of 7MPa cement bricks in class II mortar one brick wall 220 m2

6.2 Brickwork of 7MPa cement brick in class II mortar half brick wall 56 m2

6.3 Brickwork of 7MPa cement brick in class II mortar one brick wall in beam filling 24 m2

Total
7 GALVANISED HOOP IRON TIES

7.1 1.6mm Galvanised hoop iron tie 30mm wide and 750mm girth built into brickwork and wrapped around and spiked to wall plate 52 No.

Total
8 PRESTRESSED PREFABRICATED LINTELS

8.1 105mmx75mm Lintels in length not exceeding 3m 24 No.
9 INTERLOCKS AS APRON

9.1 60mm interlocking type SF 35MPa laid on and including 20mm river sand bed to falls and currents, including all cutting and waste. 84 m2

Total
ITEM NO. BRIEF DESCRIPTION OF WORKS QTY UNIT OF MEASURE

10. NATURAL GREY FIBRE CEMENT WINDOW SEALS IN SINGLE LENGTHS BEDDED IN CLASS 1

MORTAR INCLUDING METAL FIXING LUGS

10.1 15mmxl50mm sills set flat and slightly projecting. 20 m

Total
11 VERMIN PROOF AIR BRICKS AND VENTS INCLUDING FORMING OPENING WALL AND RENDERING SMOOTH ALL ROUND IN CEMENT MORTAR

11.1 229 x 152mm Clay vermin proof air brick 12 No.

Total
12 ROOF CONSTRUCTION

12.1 Sawn Softwood Grade 4 with nailed or bolted connections 38x114mm Timber in wall plates, rafters, beams, Joists, hangers, runners etc. 28.4 m

12.2 Prefabricated double pitch roof trusses of Grade V/M6 timber with a pitch of exceeding 8m and not exceeding 10m and an overhang of not exceeding 900mm at eaves on both sides, 50mmxl52mm timber. 18 No.

12.3 Medium density fibre cement fascias and bargeboards 15mm fascia and bargeboard 225mm wide plain finished with including standard H- profile jointing strips and corner jointers fixed to end of rafters and battens with and including 40x40 x3mm mild steel angles 100mm long bolted to rafters 52 m

12.4 50x76mm purlins 220 m2

Total
13 ROOF COVERING ( BIG SIX)

13.1 Big six corrugated profile roof sheeting fixed to timbers and purlins 170 m2

13.2 Plain fixed ridge capping 18.4 m

13.3 Ridge end cap 4 No.

13.4 Side cladding with end laps and side laps sealed 34.6 m2

Total
ITEM NO. BRIEF DESCRIPTION OF WORKS QTY UNIT OF MEASURE

14 CEILINGS

14.1 Sawn Softwood 38x50mm Brandering at 400mm centres in one direction at joints and against walls 140 m2

14.2 9.5mm gypsum plasterboard ceiling board in full length sheet fixed to brandering ( 140 m2

MORTAR INCLUDING METAL FIXING LUGS

10.1 15mmxl50mm sills set flat and slightly projecting. 20 m

Total
11 VERMIN PROOF AIR BRICKS AND VENTS INCLUDING FORMING OPENING WALL AND RENDERING SMOOTH ALL ROUND IN CEMENT MORTAR

11.1 229 x 152mm Clay vermin proof air brick 12 No.

Total
12 ROOF CONSTRUCTION

12.1 Sawn Softwood Grade 4 with nailed or bolted connections 38x114mm Timber in wall plates, rafters, beams, Joists, hangers, runners etc. 28.4 m

12.2 Prefabricated double pitch roof trusses of Grade V/M6 timber with a pitch of exceeding 8m and not exceeding 10m and an overhang of not exceeding 900mm at eaves on both sides, 50mmxl52mm timber. 18 No.

12.3 Medium density fibre cement fascias and bargeboards 15mm fascia and bargeboard 225mm wide plain finished with including standard H- profile jointing strips and corner jointers fixed to end of rafters and battens with and including 40x40 x3mm mild steel angles 100mm long bolted to rafters 52 m

12.4 50x76mm purlins 220 m2

Total
13 ROOF COVERING ( BIG SIX)

13.1 Big six corrugated profile roof sheeting fixed to timbers and purlins 170 m2

13.2 Plain fixed ridge capping 18.4 m

13.3 Ridge end cap 4 No.

13.4 Side cladding with end laps and side laps sealed 34.6 m2

Total
ITEM NO. BRIEF DESCRIPTION OF WORKS QTY UNIT OF MEASURE

14 CEILINGS

14.1 Sawn Softwood 38x50mm Brandering at 400mm centres in one direction at joints and against walls 140 m2

14.2 9.5mm gypsum plasterboard ceiling board in full length sheet fixed to brandering ( 140 m2

elsewhere measured) with and including wire scrim and 'Rhinolite' skimmed over all joints between sheets

Total
15 CORNICES

15.1 70mm Coved gypsum cornice planted on 80 m

15.2 Extra over gypsum plasterboard ceiling for trap door size 600x 600mm formed of 32x47mm wrot softwood rebated framing around with cross bracing covered with 9.5mm gypsum plasterboard ceiling board and fitted into opening 2 No.

Total
16 DOORS AND FRAMES

16.1 69x102mm wrot meranti rebated door frame to suit 44mm door size 813x2032mm high countersunk plugged, screwed and pelleted to wall 4 No.

16.2 Wrot Meranti 44mm solid laminated flush door with hard wood venier on both sides and concealed edge strips size 813x2032mm high 2 No.

16.3 Wrot Meranti 40mm semi-solid flush door with hard wood venier on both sides and concealed hard wood edge strips size 813x2032mm high 2 No.

16.4 32mm rubber door stopper fixed to wall/ floors 4 No.

Total
17 IRONMONGERY AND HINGES

17.1 Hinges: 100x75mm brass butt hinges with brass pin and nylon washers 8 No.

17.2 Cylinder locks Euro profile single cylinder lock with Euro profile lock case and brass forend 4 No.

Total
18 ALUMINIUM WINDOWS

18.1 Natural anodized aluminium windows glazed with including 4mm clear float glass window type HS 129 to suit opening size 900x600mmm high: storeroom windows. 2 No.

18.2 Natural anodized aluminium windows glazed with and including 4mm clear float glass window types HS 159 to suit opening size 1200 x 900mm high: front windows. 4 No.

18.3 Natural anodized aluminium window glazed with and including 4mm clear float glass window type HS 1512 to suit opening size 1500x 1200mm high: back windows. 6 No.

18.4 Burglars bars 12mm round bar to be welded to storerooms windows (900mm x 600mm) 8 m2

Total
19 EXTERNAL AND INTERNAL WALL PLASTERING
elsewhere measured) with and including wire scrim and 'Rhinolite' skimmed over all joints between sheets

Total
15 CORNICES

15.1 70mm Coved gypsum cornice planted on 80 m

15.2 Extra over gypsum plasterboard ceiling for trap door size 600x 600mm formed of 32x47mm wrot softwood rebated framing around with cross bracing covered with 9.5mm gypsum plasterboard ceiling board and fitted into opening 2 No.

Total
16 DOORS AND FRAMES

16.1 69x102mm wrot meranti rebated door frame to suit 44mm door size 813x2032mm high countersunk plugged, screwed and pelleted to wall 4 No.

16.2 Wrot Meranti 44mm solid laminated flush door with hard wood venier on both sides and concealed edge strips size 813x2032mm high 2 No.

16.3 Wrot Meranti 40mm semi-solid flush door with hard wood venier on both sides and concealed hard wood edge strips size 813x2032mm high 2 No.

16.4 32mm rubber door stopper fixed to wall/ floors 4 No.

Total
17 IRONMONGERY AND HINGES

17.1 Hinges: 100x75mm brass butt hinges with brass pin and nylon washers 8 No.

17.2 Cylinder locks Euro profile single cylinder lock with Euro profile lock case and brass forend 4 No.

Total
18 ALUMINIUM WINDOWS

18.1 Natural anodized aluminium windows glazed with including 4mm clear float glass window type HS 129 to suit opening size 900x600mmm high: storeroom windows. 2 No.

18.2 Natural anodized aluminium windows glazed with and including

Documents

Tender Notice
Login to view

Namibia Public Procurement Intelligence

Frequently asked questions

The bid deadline for Constructions of 2 Classrooms with 2 Storerooms at High Hope PS was 21 Jul 2022. Bidding is closed.

This tender has been issued by ERONGO REGIONAL COUNCIL in Namibia.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 68338780. The purchaser document reference is W/RFQ/ERC - 020/2021/2022.

Browse other tenders from Namibia or search by relevant keywords and CPV classification.