Tender notice from South Africa, published on 01 Feb 2017.
Executive Summary
The CITY OF CAPE TOWN has issued a Tender notice for the procurement of a Supply: Valve in the South Africa. This Tender notice was published on 01 Feb 2017 and is scheduled to close on 07 Feb 2017, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 10701721, while the tender notice number is A021701164 and Register on the platform.
Supply: Valve Sector : Specialised Products Closing Date : Tuesday, February 7, 2017 - 14:00 Issue Date : Monday, January 30, 2017 - 08:00 Region : Western Cape Flow control valve 150 mm model 757-66-u please create rfq for supply, install and commission of fluid control valve, incl bi-level vertical float. Specifications: level and flow control valve 150 mm model 757-66-u bi-level and flow control valve including downstream orifice plate, supply, install and commisioning. The model 757-66-u level and flow control valve with bi-level vertical float is a hydraulically operated, diaphragm actuated control valve that controls reservoir filling. The valve hydraulically opens at pre-set low level and shuts off at pre-set high level. During filling, it limits the flow to preset maximum, regardless of fluctuating upstream pressure or reservoir level. Engineer specifications: the level & flow control valve with bi-level vertical float shall control reservoir filling, opening at pre-set low level and shutting off at pre-set high level. During filling, it shall limit the flow to pre-set maximum regardless of fluctuating upstream pressure or reservoir level. Main valve: the main valve shall be a center guided, diaphragm actuated globe valve of either oblique (y) or angle pattern design. The body shall have a replaceable, raised, stainless steel seat ring. The valve shall have an unobstructed flow path, with no stem guides, bearings, or supporting ribs. The body and cover shall be ductile iron. All external bolts, nuts, and studs shall be duplex® coated. All valve components shall be accessible and serviceable without removing the valve from the pipeline. Actuator: the actuator assembly shall be double chambered with an inherent separating partition between the lower surface of the diaphragm and the main valve. The entire actuator assembly (seal disk to top cover) shall be removable from the valve as an integral unit. The stainless steel valve shaft shall be center guided by a bearing in the separating partition. The replaceable radial seal disk shall include a resilient seal and shall be capable of accepting a v-port throttling plug by bolting. Control system: the control system shall consist of a 4-way, "last position", adjustable, bi-level, hydraulic, vertical float, a 2-way adjustable direct acting pressure reducing pilot valve, a hydraulic relay valve, a needle valve, isolating cock valves, a filter, and a stainless steel downstream orifice plate. All fittings shall be forged brass or stainless steel. The assembled valve shall be hydraulically tested and factory adjusted to customer requirements. Quality assurance: the valve manufacturer shall be certified according to the iso 9001 quality assurance standard. The main valve shall be certified as a complete drinking water valve according to nsf, wras, a...
The bid deadline for Supply: Valve was 07 Feb 2017. Bidding is closed.
This tender has been issued by CITY OF CAPE TOWN in South Africa.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42131100 - Valves defined by function.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 10701721. The purchaser document reference is A021701164.
This tender falls under Technology and Equipment in South Africa. Suppliers in these sectors can track similar South Africa tenders using CPV-based alerts.