Expired Tender Oman ICB TOT Ref. 55723814

Supply Man Power to Adam Base on Monthly Basis Tender - 55723814

Tender notice from Oman, published on 30 Jul 2021.

Executive Summary

The ABRAJ ENERGY SERVICES has issued a Tender notice for the procurement of a Supply Man Power to Adam Base on Monthly Basis & Others on Rental Basis as Well in the Oman. This Tender notice was published on 30 Jul 2021 and is scheduled to close on 12 Aug 2021, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 55723814, while the tender notice number is STC.210127.WS.S016 and Register on the platform.

Key facts

Summary
Supply Man Power to Adam Base on Monthly Basis & Others on Rental Basis as Well
TOT Ref. No.
55723814
Document Ref. No.
STC.210127.WS.S016
Country
Oman
Notice type
Tender
Competition
ICB
Publication date
30 Jul 2021
Bid deadline
12 Aug 2021
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Supply Man Power to Adam Base on Monthly Basis & Others on Rental Basis as Well
Supply Man Power to Adam Base on ADHOC Rate Agreement.
The Submission date for bid is at 10.00 AM on 12/08/2021.
Monthly basis Welder Work Scope:

 Repair/weld/fabricate/modify any tasks related to the WS activities supervised by Maintenance

supervisor

 Participate in all company Adam Base yearly maintenance projects. In terms of repair & Modification

jobs requirement.

 With an approved request from supervisors, carry out all required modifications & work on WS

equipment from field or in Adam base.

 With an approved request from site had to Carry out General jobs such as Repair of handrails, stairway

and walkways etc.to ensure that they remain in safe condition.

 Install new areas of LP pipe as instructed, in accordance with industry regulations

 Responsible for maintaining appropriate levels of material and welding supplies

 Can carry the jobs on field if required.

 Keep all work area clean and tidy

 Eliminate any waste and establish a cost conscious planning effort within area of responsibility.

 Valid H2S permit

 ID designation to be matched with the job.

Daily basis Welder/Fabricator Work scope (6G Welders with valid certificates)

 Repair, build or modify WS structure as instructed by location supervisor

 Participate in all company Adam Base yearly maintenance projects. In terms of repair & Modification

jobs requirement.

 With an approved request from supervisors, carry out all required modifications & work on WS

equipment from field or in Adam base.

 With an approved request from site had to Carry out General jobs such as Repair of handrails, stairway

and walk ways etc.to ensure that they remain in safe condition

 Cover the annual maintenance and 6 month inspection campaigns.

 Install new areas of HP pipes as instructed, in accordance with industry regulations

 Can carry the jobs on field if required.

 Keep all work area clean and tidy

 Eliminate any waste and establish a cost conscious planning effort within area of responsibility.

 Valid H2S permit

 ID designation to be matched with the job.
Monthly basis Mechanic & Electricion for Workshop & Adam Base Shortage Work Scope:

 Responsible for performing all Workshop & Adam Base tasks under the supervision of WS manager & WS Supervisors

 Fully competent & aware for all the WS equipment

 Keep all work area clean and tidy

 Responsible for all Tools & its inventory

 Eliminate any waste and establish a cost conscious planning effort within area of responsibility.

 Valid H2S permit

 ID designation to be matched with the job.

Daily Basis Mechanic & Electricion (for AM & MOH)

 Responsible for performing all Adam Base tasks during AM & any MOH going on

 Fully competent & aware for all the WS equipment

 Keep all work area clean and tidy

 Eliminate any waste and establish a cost conscious planning effort within area of responsibility.

 Valid H2S permit

 ID designation to be matched with the job.

Monthly / Daily basis Carpenter Work Scope:

 Builds or repairs cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, camp.

 Using woodworking machines, hand tools, or power tools.

 Assembles and fastens materials to make frameworks or props, using hand tools and wood screws

 Installing wooden structures such as roofing frames, rafters, partitions, joists and stud work

 Designing and installing cabinets, shelving, fitted furniture, drywall and insulation

 Adding fixtures and fittings such as door handles, locks, hinges and closures

 Keep all work area clean and tidy

 Valid H2S permit

 ID designation to be matched with the job.

 Able to perform the job on field.

Monthly / Daily basis Plumber Work Scope:

 Coordinate, troubleshoot, repair, inspect and maintain plumbing equipment including, but not limited to, faucets, lavatories, toilets, flush

valves, sinks, water heaters, drinking fountains, domestic water heaters and boilers, garbage disposals, backflow devices, toilets, urinals,

faucets, hose bibs, and drains.

 Perform preventative maintenance inspections and repairs in district facilities including, but not limited to, domestic water systems and

related devices and sanitary waste drainage

 Install new plumbing fixtures including, but not limited to, sinks, commodes, urinals, faucets, drinking fountains, garbage disposals,

domestic water heaters and related devices.

 Install, repair, or replace commercial and residential water systems.

 Service plumbing fixtures and equipment.

 Installs, repairs, or replaces hot and cold water lines.

 Repairs and replaces pneumatic steam valves, radiator valves, traps, and steam and condensate pipes.

 Repairs and replaces domestic hot water heat pumps, chilled water pumps, sump pumps, and sewage pumps.

 Installs, tests, and repairs all sizes of backflow prevention devices.

 Maintain a clean and safe workplace.

 Valid H2S permit

 ID designation to be matched with the job.

 Able to perform the job on field.

Monthly / Daily basis AC Operator Work Scope:

 The air conditioning operator install, inspect, maintain, and repair air conditioner.

 Ventilate equipment and controls making sure they operate efficiently and continuously.

 Perform regular maintenance work on cooling units.

 Diagnose electrical and mechanical defects and malfunctions.

 Installing, maintaining and repairing ventilation and air conditioning systems and equipment.

 Identifying maintenance risks on equipment.

 Diagnosing electrical and mechanical faults for systems.

 Cleaning, adjusting and repairing systems, and performing warranty services.

 Performing emergency repairs promptly and efficiently.

 Maintain a clean and safe workplace.

 Valid H2S permit

 ID designation to be matched with the job.

 Able to perform the job on field
Notes:

1. Work Location for Monthly / daily basis Welders : All Adam Base & field

2. Work location for Monthly / daily basis Mechs & Elect: Workshop & field

3. Work Location for Daily / daily basis Mechs, Elect, Fabr, welders: All Adam Base &

field
Sr. Description Unit price ( Daily/ Monthly)

1 Monthly basis Welder

2 Daily basis Welder/Fabricator

3 Monthly basis Mechanic & Electrician for Workshop & Adam Base Shortage

4 Daily Basis Mechanic & Electrician (for AM & MOH)

5 Monthly / Daily basis Carpenter

6 Monthly / Daily basis Plumber

7 Monthly / Daily basis AC Operator

Documents

Tender Notice
Login to view

Oman Public Procurement Intelligence

Frequently asked questions

The bid deadline for Supply Man Power to Adam Base on Monthly Basis & Others on Rental Basis as Well was 12 Aug 2021. Bidding is closed.

This tender has been issued by ABRAJ ENERGY SERVICES in Oman.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 55723814. The purchaser document reference is STC.210127.WS.S016.

Browse other tenders from Oman or search by relevant keywords and CPV classification.