Expired Tender South Africa ICB TOT Ref. 86797809

Supply, Delivery and Commissioning of One Rescue Tender - 86797809

Tender notice from South Africa, published on 05 Aug 2023.

Executive Summary

The AIRPORTS OF MAURITIUS CO LTD (AML) has issued a Tender notice for the procurement of a Supply, Delivery and Commissioning of One Rescue Boat with OBM and Trailer in the South Africa. This Tender notice was published on 05 Aug 2023 and is scheduled to close on 16 Aug 2023, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 86797809, while the tender notice number is OAB/GD/RFFS/VR/SG/23/008 and Register on the platform.

Key facts

Summary
Supply, Delivery and Commissioning of One Rescue Boat with OBM and Trailer
TOT Ref. No.
86797809
Document Ref. No.
OAB/GD/RFFS/VR/SG/23/008
Country
South Africa
Notice type
Tender
Competition
ICB
Publication date
05 Aug 2023
Bid deadline
16 Aug 2023
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Self Financed

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Supply, Delivery and Commissioning of One Rescue Boat with OBM and Trailer
Rescue Boat QTY 1

The dimension of the Rescue boat and trailer should be as illustrated

below, so that it can be housed in the rescue centre building of

Dimension

Length: 9 m

Breadth: 3 m 80

Height : 2 m 67

1. Dimensions of Rescue Boat Overall length - 8 to 8.5 m

2. Dimensions of Rescue Boat Overall Beam : 3 m + or - 0.2 m

3. Dimensions of Rescue Boat Draft 0.5 m -0.7 m

4. Carrying capacity At least 12 -15 persons ( including the coxswain & observer)

5. Displacement Full load at least 6 Tons

6. Cruising Speed Fully loaded 30 - 35 Knots

7. Max Speed 35 Knots

8. Dead rise Angle Transom: At least 24 degrees

Forward entry: At least 55° degrees.

9. Trim angle 1.5-2.5 degrees at max. speed;

10. Hull Deep Vee Mono Hull - using Multi - axial vinyl ester glass fibre.

Fibre materials with three spray rails in each sides.

11. Hull At least two longitudinal and three transversal bulkheads (which

absorbs the stresses in both direction)

12. Hull Materials - Vinyl ester Fibre

13. Hull Strakes- and ‘Chine flat- on both sides of the hull. Its act as shock

absorbers to cushion the motion of the hull and also to provide

stability

14. Fenders Polyurethane foam filled fenders all-round the boat ( resistant and

provide low frictional resistant)

15. Fenders Dimension of fenders approximately 300- 400 mm. material rubber &

foam, resistant to climate condition

16. Fenders Colour : preferably orange

17. Fenders Mechanically fixed or bonded to fibre glass structures or other

alternative easy for replacement in case of damaged.

18. Fenders Must be positioned fully above waterline level at rest

19. Console Forward console helm station comprising: windscreen throttle

steering, switch panel, GPS, Sounder, engine starting /stopping
56

engine, oil pressure, main engine RPM, Battery voltage and other

parameter which deem necessary.

20. Console An open type cabin with folding canopy

21. Console Protective windscreen to be fitted at the front

22. Console One Coxswain seat to be shock mitigation system.

23. Console One Observer seat behind coxswain seat ( Not alongside)

24. Deck Anti - Slip deck

25. Deck Self bailing

26. Deck Watertight bilge cover on deck bilge

27. Deck Colour Orange

28. Accessories Builder-s plate and craft identification to be fixed in conspicuous

place.

29. Accessories Bow compartment for storage of Anchor with securing latch fitted

with drain system.

30. Accessories Aft compartment for storage of battery latch fitted with drain system

/water tight locker

31. Accessories Supply and fix 2 x 2.5 kg CO2 Fire extinguishers in conspicuous

space for ready use in case of fire.

32. Accessories At least fitted with 3 or more lifting points taking into consideration

full load of craft.

33. Accessories Bow securing eye ( stainless steel grade 316) - Must be strong

enough for winching of craft

34. Accessories Provision for at least three bollard or other alternatives for securing

craft

35. Accessories To provide one removable stainless steel grade( 316) or Aluminium

ladder

36. ‘3Accessories To supply stainless steel anchor complete with anchor line for this

type of boat. The length of Anchor chain shall be at least three time

of the boat length.

37. Accessories set of tools kit attached as per annex ( same to be supplied upon

delivery)

38. Accessories Supply and fix two bollards at the AFT part of the craft boat tenable

to tow 2 life raft of capacity 1300 kg each.

39. Canopy Fixing of foldable canopy made of stainless (316)

40. Canopy Material : Dralon colour Navy Blue

41. Canopy Stanchions, fitting, movable parts made of stainless steel ( 316)

42. Life raft Two life raft to be fitted on the board on stainless steel frame grade

(316) one Starboard and one on Port side ( easy to launch at sea)

43. Life raft The capacity of the life raft should not more than 85 kg each

44. Life raft Should be made provision for at least 20 persons each

45. Life raft Should be as per solas B convention

46. Life raft Should be well secured on stainless steel frame and easy released at

sea.

57

47. Propulsion Fitted with twin four stroke saltwater types OBMs of power rating

between 115 - 150 HP as per recommended power for boat ( one

normal and one counter rotation per boat)

48. Propulsion Heavy duty complete hydraulic steering system ( dual piston) with

steering wheel and tie bar

49. Propulsion Independent gear and speed control level.

50. Propulsion Power tilt and trim

51. Propulsion Separate fuel lines and fuel water separators for each engine

52. Propulsion Supply with battery 100 Ah (Maintenance free) & batter cut off

switch for each engine

53. Propulsion Fixed with digital multi-function gauges (i) tachometer, (ii)

speedometer, (iii) water pressure and temperature meters, (iv) battery

voltage meter (v) odometer, (vi) fuel management meter or

combination

54. Propulsion Dual top mount control box

55. Propulsion Propeller 3 Blades stainless steel

56. Propulsion Make ( Bidder to specify)

57. Propulsion Model ( Bidder to specify)

58. Propulsion Documentary evidence of OEM Authorization certification

59. Servicing and maintenance

contract for OBMs, Electrical

steering cable.

First three servicing free of cost and all charges at the expense of the

supplier

60. Servicing and maintenance

contract for OBMs, Electrical

steering cable.

Maintenance Contract

The bidder shall undertake to carry out servicing of the OBMs

including their electrical parts, fuel and oil system and steering

system as required/recommended by the OBMs manufacturer-s

maintenance schedule for up to 1000 running hrs. incl. the first 3 free

servicing.

61. Servicing and maintenance

contract for OBMs, Electrical

steering cable.

Maintenance Contract

Bidder shall specify the details and costs of each servicing up to 1000

running hrs. by filling in and submitting the Tables at Annex I and II

respectively

62. Servicing and maintenance

contract for OBMs, Electrical

steering cable.

Maintenance Contract

Bidder shall indicate the cost of an intervention (labour and transport)

to attend and rectify a defect/breakdown which is not otherwise

covered under warranty in the MC. The value of the intervention shall

remain unchanged for the duration of validity of the MC

63. Maintenance contract

conditions

Maintenance Contract :(MC)

The bidder shall propose a maintenance contract (MC) with his bid

which will be considered by AML. The latter reserves the right to

make amendments to the proposed MC.

64. Maintenance contract

conditions(MC)

Both parties, bidder and customer shall sign the MC upon delivery of

the item and bidder shall undertake to comply with the conditions of

the MC throughout its valid period

65. Maintenance contract

conditions(MC)

The maintenance contract defines the responsibilities of the bidder

and the customer with regards to the servicing and repairs of the
58

OBMs, including electrical parts, fuel and oil system and steering

system.

66. Maintenance contract

conditions(MC)

The bidder shall include the conditions laid down by the Customer at

Annex I and Annex II in the MC. Bidders may also propose

amendments to the conditions of the customers, if any, which will be

subject to the consideration and approval of the evaluation

committee.

67. Maintenance contract

conditions(MC)

The details and costs of each servicing up to 1000 running hrs. are to

be included in the MC.

The MC shall also include the cost of an intervention (Labour and

transport) to attend to defects or breakdowns which are not covered

under warranty.

68. Maintenance contract

conditions(MC)

Local OEM representative in Mauritius for servicing & Maintenance.

69. Trailer One hot dip galvanized trailer or Aluminium trailer adopted for

launching and removing of craft from sea up to distance of 35 - 40

Mts by winching mechanism

70. Trailer One heavy duty towing wheel at the front

71. Trailer The trailer to be made of dual torsion axle having at least four wheels

to the rear to give a smooth ride when towing.

72. Trailer Heavy duty winch at the front must be of high torque and high

efficiency to beach and launch the full loud of the craft

73. Trailer Polyurethane rollers or nylon busted roller for easy mounting of craft

without marking the hull

74. Trailer All fasteners on the trailer to be stainless steel ( 316 or 301)

75. Trailer Heavy Duty tubeless tyres

76. Trailer Pin type at the front of hole Ø

77. Trailer To be supplied with two spare wheel ( one for rear wheel and one for

front wheel)

78. Fuel Tank Either to supply with OBMS high density unbreakable, polyethylene

fuel tank of capacity not less than 50 Lts with fuel hose and adaptor

for the OBMs

79. Fuel Tank In addition two spares high density unbreakable polyethylene fuel

tank of capacity not less 50 Lts to be supplied upon delivery

80. Fuel Tank Provision for securing the high density unbreakable polyethylene fuel

tank on the craft ( one on Port and STBD side of the craft)

81. Fuel Tank Or Incorporate fuel tank made of Inox of capacity 300 - 400 LTS

82. Fuel Tank The tank will have suitable manhole filling point and ventilation on

the deck

83. Fuel Tank To be equipped with drain plug and all connection from fuel tank to

OBMs in regards to valves & piping to be of stainless steel and easily

accessible for maintenance

84. Hatch cover If any Hatch cover found on deck same to be watertight and easy to

open for inspection of bilge

85. Life Buoys Provide to fix two standard lifebuoys with heaving lines ( Solas

approved)

59

86. Life Buoys The word ‘AML Rescue Boat to be marked on both life buoys.

Colour: Orange with fluorescent strap.

87. Life Jacket Provide Solas approved lifejackets with whistle for at least 15

persons.

88. Painting and preservation Colour schemes to be orange

Documents

Tender Notice
Login to view

South Africa Public Procurement Intelligence

Frequently asked questions

The bid deadline for Supply, Delivery and Commissioning of One Rescue Boat with OBM and Trailer was 16 Aug 2023. Bidding is closed.

This tender has been issued by AIRPORTS OF MAURITIUS CO LTD (AML) in South Africa.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 86797809. The purchaser document reference is OAB/GD/RFFS/VR/SG/23/008.

Browse other tenders from South Africa or search by relevant keywords and CPV classification.