Replacement Gate Valve for Berching Lock Tender - 145526665

Procurement Summary

Country: Germany

Summary: Replacement Gate Valve for Berching Lock

Deadline: 01 Sep 2026

Posting Date: 20 Jul 2026

Other Information

Notice Type: Tender

TOT Ref.No.: 145526665

Document Ref. No.: 2026-811-000003

Competition: ICB

Financier: Self Financed

Purchaser Ownership: Public

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

At the Berching lock, gate valves and fittings (industrial fittings) must be replaced, as well as pipes, ladders and operating rods contaminated with PAH and asbestos to repair. The gate valves are used to drain water-bearing areas Parts of the lock system, e.g. for maintenance work on savings pool or longitudinal canal closures or generally for structural inspection. The valves to be replaced are located in shafts of the lock system that are approx. 8-15m deep. Among the shafts are, Steel pipes cast in concrete are laid from the water-carrying channels of the lock, which then end at the gate valves or molded parts. The shafts are flooded by opening the gate valves. The water can then come out of the shafts pumped out and led into the underwater via a ring pipeline until the bottom system of the lock is emptied and the solid structure is completely accessible. The valves were put into operation in 1992 and have been in a humid environment and partly in since then in use in the water change zone. Parts of the tendered services on the water-carrying components can only be carried out during the draining phase of the lock, within the lock barrier 2027 (SSP 2027). services Non-water-conducting components (operating rods and ladders) or lockable fittings and fittings can be carried out before, but should primarily be carried out after, the drainage phase. The preparation of partitions for the ASI work as well as the The construction site should be set up in advance of the SSP after consultation with the client. For carrying out the dismantling and assembly work on water-bearing and non-shut-off components, as well as the corrosion protection of the pipe sockets in the shafts the following Time window specified: Tue. April 6th, 2027 to Fri. April 23rd, 2027 All other services (steel construction and other corrosion protection work, a...
Type of procedure: Berching lock MDK km 122.508 Maria-Hilf-Straße 76 92334 Berching

Documents

 Tender Notice