Renewal of the Inlet at the Natewisch Pumping Tender - 144236874
Tender notice from Germany, published on 30 Jun 2026.
Executive Summary
The SAXONY-ANHALT: STATE OFFICE FOR FLOOD PROTECTION AND WATER MANAGEMENT has issued a Tender notice for the procurement of a Renewal of the Inlet at the Natewisch Pumping Station - Construction Work in the Germany. This Tender notice was published on 30 Jun 2026 and is scheduled to close on 28 Jul 2026, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 144236874, while the tender notice number is 26/N/0131/OB and Register on the platform.
Key facts
Summary
Renewal of the Inlet at the Natewisch Pumping Station - Construction Work
~ 150 days - Set up, maintain and operate 1 dewatering system (lowering target 3 m below reference water level) of your choice ~ 32 m² - Take up concrete paving including the base layer, store it again and reinstall it ~ 120 m³ - loosen soil (aue clay, sand), load it, Store temporarily, reinstall, transport 0.25 km ~ 33 m² - free-standing support pile wall, create support length 9.00 m - Dismantling the steel components (1 rake cleaning system + 4 rakes + 1 railing…), store them temporarily and reassemble them ~ 8.3 t - Break off and dispose of steel components in the pump chamber and free lock (valves, pipelines DN 300…600, pump shaft pipes DN 400…DN 700, traverses, etc.). ~ 43 m³ - demolition of reinforced concrete by sawing, drilling ~ 43 m³ - reinforced concrete breaking 0/56 mm ~ 194 m² - Produce and remove formwork ~ 8.6 t - Install reinforcing steel bars ~ 47.7 m³ - produce reinforced concrete in formwork (ÜK2 construction site) ~ 68 pieces - Insert composite anchors - Supply and install lifting contactors for closing pump inlets and free lock + drives, left. Width: 2 x 1.85 m, 1x 1.44 m 1 x 3.40 m, max. protective panel height: ~2.00 m 1 piece - control walkway + railing, approx. 12 m long 8 pieces - supply and install fixed ladders (l = 1.65…2.89 m) 2 pieces - pipe DN 600 flanged, ~1.20 m long, deliver, install 2 pcs - Supply and install expansion piece DN 600 2 pieces - pipe DN 500 flanged, ~1.20 m long, deliver, install 2 pieces - supply and install expansion piece DN 500 1 piece - pipe DN 300 flanged, ~1.20 m long, deliver, install 1 piece - supply expansion piece DN 300, install 1 piece - Shaft pipe ~ DN 400 for propeller pump, supply and install 2 pieces - Shaft pipe ~ DN 700 for propeller pump, supply and install 1 piece - supply and install gate valve DN 300 2 pieces - supply and install gate valve DN 500 2 pcs - Supply and install gate valve DN 600 Type of process: The Natewisch pumping station is located in the municipality of Aland, in the Stendal district. The location of the pumping station is in the Pollitz district, corridor 5.
The bid deadline for Renewal of the Inlet at the Natewisch Pumping Station - Construction Work was 28 Jul 2026. Bidding is closed.
This tender has been issued by SAXONY-ANHALT: STATE OFFICE FOR FLOOD PROTECTION AND WATER MANAGEMENT in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 144236874. The purchaser document reference is 26/N/0131/OB.
Browse other tenders from Germany or search by relevant keywords and CPV classification.