Expired Tender Botswana ICB TOT Ref. 48316696

Purchase of Fuel Dispensing Equipment Tender in Botswana - 48316696

Tender notice from Botswana, published on 10 Dec 2020.

Executive Summary

The THE MINISTRY OF INVESTMENT, TRADE AND INDUSTRY has issued a Tender notice for the procurement of a Purchase of Fuel Dispensing Equipment in the Botswana. This Tender notice was published on 10 Dec 2020 and is scheduled to close on 16 Dec 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 48316696, while the tender notice number is BOBS/TRF/15/2020 and Register on the platform.

Key facts

Summary
Purchase of Fuel Dispensing Equipment
TOT Ref. No.
48316696
Document Ref. No.
BOBS/TRF/15/2020
Country
Botswana
Notice type
Tender
Competition
ICB
Publication date
10 Dec 2020
Bid deadline
16 Dec 2020
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
European Union (EU)

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Quotation are invited for Purchase of Fuel Dispensing Equipment.
THE MINISTRY OF INVESTMENT, TRADE AND INDUSTRY
PROCUREMENT REFERENCE NUMBER:
BOBS/TRF/15/2020
REQUEST FOR QUOTATION FOR SUPPLY, DELIVERY AND INSTALLATION OF FUEL DISPENSING EQUIPMENT FOR THE BOTSWANA BUREAU OF STANDARDS
DATE: 07th December 2020
REQUEST FOR QUOTATIONS (RFQ)
Reference Number: BOBS/TRF/15/2020
Contract Title: Purchase of Fuel Dispensing Equipment Number of Lots: 3 (three)
1. Ministry of Investment, Trade and Industry is inviting you to submit a quote for the supply, delivery and installation of the following Fuel Dispensing Equipment for the Botswana Bureau of Standards, to be procured under Contract: BOBS/TRF/12/2020
Lot Number Description Quantities

1 200L Measuring Can (Prover Tank) 1

2 500L Measuring Can (Prover Tank) 1

3 Master Meter BM 950 + Wheel Trailer 1
2. Your quotation, in the required format (See Annex 2 to this RFQ), should be addressed and submitted to:
SADC-TRF PROCUREMENT OFFICER

Ministry of Investment, Trade and Industry

Private Bag 004

Gaborone

Botswana

Attention: H. C. Maripe
3. The deadline for submission of your quotations, to the address above is 16 December 2020, 15:00hours local time.
4. All quotations should be dropped in the Tender Box at 3rd floor and quotations by E-mail or fax will NOT be accepted.
5. Your quotation(s) should be submitted as per the following instructions, and in accordance with the Terms and Conditions of the Request For Quotation.
(i) PRICES: The prices should be quoted CIP (as per Inco terms 2010) in the local currency, including all duties attached to the sale of the goods (such as VAT, customs duties, etc.) and transport to the final destination (BOBS Head Office).
(ii) EVALUATION AND AWARD OF REQUEST FOR QUOTATION: Quotations determined to be administrative (see Paragraph 2, 3, 4, 5, 6 and 7) and technical compliant to the requirements will be evaluated by comparison of their prices per lot (defined as above). The award will be made to the bidder offering an administrative and technically compliant quotation at the reasonable total price for each lot.
(iii) VALIDITY OF THE OFFER: Your quotation should be valid for a period of 90 days from the date

of deadline for submission of quotations indicated in Paragraph 3 above.

(iv) DOCUMENTS TO BE ATTACHED: Current Tax Clearance Certificate, Trading Licence and

Certificate of Incorporation.

(v) Your quotation should be accompanied by adequate technical documentation or catalogue(s) or

equivalent and other printed material or pertinent information for items quoted.

7. The goods are expected to be delivered at Botswana Bureau of Standards, plot no. 55745, Airport Road,

(Block 8) - Gaborone within 14 days from the signature of the Purchase Order.

8. Additional request for information and clarifications can be made no later than 5 days prior to deadline

indicated in the paragraph 3 above, from:

The procuring authority: Ministry of Investment Trade and Industry

The contract manager: Botswana Bureau of Standards

Contact person: Hwanano C. Maripe or Mable Mpofu

Alfred Kgotlaetsile or Amen Ntlhaile

Telephone: 3645488 or 3645430

Fax: 3903120

E-mail: [email protected] or [email protected]

[email protected] or [email protected]

ANNEXES:

ANNEX 1: Technical Specifications

ANNEX 2: Quotation Form

ANNEX 3: Technical Compliance Form

Sincerely,

____________________

Name: Ms Hwanano C. Maripe

Title: SADC TRF Procurement Officer

Date: ………………….. 2020

Page 4 of 10

ANNEX 1: TECHNICAL SPECIFICATIONS

The Goods and Related Services shall comply with following Technical Specifications and Standards:

LOT 1: 200L Measuring Can (Prover Tank)

Specifications Requested by BOBS

Quantity 1

Model

Warranty At least 2 years onsite

Colour Any

New Yes

Material: Stainless Steel 304

with 2 x Thermometer Wells

Complete with Trailer and all

accessories as in the drawing shown below.

200L

Page 5 of 10

LOT 2: 500L Measuring Can (Prover Tank)

Specifications Requested by BOBS

1

Quantity

Model JY-CLC

Type Tri-Foot with down outlet

Warranty At least 2 years

Colour Any

New Yes

Material: Stainless Steel 304

with 2 x Thermometer Wells

Complete with Trailer and all

accessories as in the drawing shown below.

500L

Page 6 of 10

LOT 3: Master Meter BM 950 + Wheel Trailer

Specifications Requested by BOBS

Quantity 1

Model BM 950

Warranty At least 2 years onsite

Colour Any

New Yes

Typical repeatability 0.02%.

Maximum linearity 0.1% ( for example minus 0.05% to

Plus 0.05%) over the flow rate range 130 to 1370 Litres

Per minute. Inlet and outlet flanged 3 inch ASA150

Pressure 21 Bar. The meter has a Ductile iron manifold,

Ni-Resist cast iron body, carbon vanes, Aluminium

Rotor, Aluminium outer covers, Ni-resist cast iron inner

Covers and high nitrile seals. The meter is fitted with a

Mechanical calibrating mechanism, a mechanical

Counter head with resetable register and non resetable

Totalizer, and a direct coupled, mechanical rate of flow

Indicator. Calibration in Litres. The meter will

Additionally be fitted with a Vernier unit drum and will

be tested and certified to a 6 point Master Meter

Standard which meets all requirements for a single fuel

Grade. It must be supplied complete with full Master

Meter certification.

BM 950 + Wheel Trailer

Page 7 of 10

ANNEX 2. QUOTATION FORMAT

Lot

No.

Description

Type, brand

name

equipment

offered

Delivery

period

(in days from

the signature of

the PO)

Warranty

period

(in

months)

Quantity Unit Price

(BWP)

Vat

inclusive

Total price

(BWP)

VAT

inclusive

1 200L

Measuring Can

(Prover Tank)

1

2 500L

Measuring Can

(Prover Tank)

1

3 Master Meter

BM 950 +

Wheel Trailer

1

Page 8 of 10

ANNEX 3. TECHNICAL COMPLIANCE FORMS

Bidders shall complete these forms to confirm the compliance of the equipment offered to the Technical

specifications. Failure to complete these forms will result in a rejection of the submission.

LOT 1: 200L Measuring Can (Prover Tank)

Specifications Supplied variations

Quantity (1)

Model

Warranty (At least 2 years onsite)

Colour (Any)

New

Material: Stainless Steel 304

with 2 x Thermometer Wells

Complete with Trailer and all

accessories as in the drawing shown below.

LOT 2: 500L Measuring Can (Prover Tank)

Specifications Supplied variations

Quantity (1)

Model (JY-CLC)

Type (Tri-Foot with down outlet)

Warranty (At least 2 years)

Colour (Any)

New

Material: Stainless Steel 304

with 2 x Thermometer Wells

Complete with Trailer and all

accessories as in the drawing shown below.

Page 9 of 10

LOT 3: Master Meter BM 950 + Wheel Trailer

Specifications Supplied variations

Quantity (1)

Model (BM 950)

Warranty (At least 2 years onsite)

Colour (Any)

New

Typical repeatability 0.02%.

Maximum linearity 0.1% ( for example minus 0.05%

to

Plus 0.05%) over the flow rate range 130 to 1370

Litres

Per minute. Inlet and outlet flanged 3 inch ASA150

Pressure 21 Bar. The meter has a Ductile iron

manifold,

Ni-Resist cast iron body, carbon vanes, Aluminium

Rotor, Aluminium outer covers, Ni-resist cast iron

inner

Covers and high nitrile seals. The meter is fitted with

a

Mechanical calibrating mechanism, a mechanical

Counter head with resetable register and non resetable

Totalizer, and a direct coupled, mechanical rate of

flow

Indicator. Calibration in Litres. The meter will

Additionally be fitted with a Vernier unit drum and

will

be tested and certified to a 6 point Master Meter

Standard which meets all requirements for a single

fuel

Grade. It must be supplied complete with full Master

Meter certification.

Page 10 of 10

Other Requirements

Supplier will install (including registration of software) and commission the proposed equipment.

All items will be on at least two-year warranty after commissioning of the equipment.

Bidders must indicate the brand that they are offering.

Please note that brochures are just an additional information. You are required to clearly provide

appropriate specifications.

All prices quoted should be inclusive of taxes and duties applicable.

Supplier should not modify this form when completing the information.

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Flovac Vacuum Sewage System Maintenance Sewerage system maintenance- OSBP Botswana-Lumpsum Contracts Botswana 152138056 30 Nov 2026

Botswana Public Procurement Intelligence

Frequently asked questions

The bid deadline for Purchase of Fuel Dispensing Equipment was 16 Dec 2020. Bidding is closed.

This tender has been issued by THE MINISTRY OF INVESTMENT, TRADE AND INDUSTRY in Botswana.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by European Union (EU).

The tender is classified under the following CPV code(s): 42913300 - Oil filters.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 48316696. The purchaser document reference is BOBS/TRF/15/2020.

See the Similar Tenders section on this page or browse other tenders from Botswana.

This tender falls under Technology and Equipment in Botswana. Suppliers in these sectors can track similar Botswana tenders using CPV-based alerts.