Tenders are invited for Purchase of Drilling Pipes “½.3.
DESCRIPTION
DRILL PIPES-3-1/2" O.D. X 2.602" I.D.
GRADE-G 105, Range -II, 15.5 lbs/ft
Tool joint OD 5" X 2-1/8”
Connection pin and box NC-38 (3-1/2" IF)
Pin tong space 10 inches
Box Tong space 12-1/2” inches
with smooth tungsten carbide hardbanding
with 18 degrees taper
TK internal plastic coating
wall thickness 0.449
As per API
Steel thread protectors should be installed on pin and box
GENERAL NOTES FOR DRILL PIPES:
Length of each drill pipe with tool joint attached should be in the range of 9.14 m to 9.44
m (30 ft. - 31 ft.) measured from shoulder to shoulder. Internal coating should be with
TK- 34 / DPC to be applied all along the pipe length.
Drill pipes must be manufactured as per API Spec. 5D latest edition and must bear API
monogram. A copy of valid API Spec. 5D certificate from manufacturer shall be
submitted along with the offer.
The drill pipes shall be brand new, unused and of prime quality. The remaining body
wall thickness at any place shall be 95%.
Drill pipe shall be seamless with weld on type tool joints as per API Spec. 7 and RP 7G
latest editions. A copy of valid API Spec. 7 certificate from manufacturer shall be
submitted along with the offer/ materials.
Drill pipes shall be supplied with pressed steel thread protector or composite type
Drilltec make closed end thread protectors at both ends
The offer must contain TK-34/ DPC internal coating to be applied on the drill pipes
giving full details of the process of application.
External coating on the drill pipes shall be done as per relevant API specification. Also
drill pipes shall be adequately oiled to withstand sea voyage/ weather condition.
Bid announcement start date: 07/11/2021 Bid announcement closing date: 30/11/2021 The National Oil Wells Drilling & Workover Co., Ltd. intends to purchase “½.3 Drill Pipes according to Material purchase request No.: 36-50-2021 Companies and factories specialized in this field must submit their technical and financial offers to the Tender Committee in accordance with the specifications file and the general conditions attached to the announcement:
Start date of bid announcement: 11/07/2021
End date of bid announcement: 11/30/2021
Technical offers:
Unquoted and technical offers should submitted to
[email protected]A - Consist of technical details based on requirement,
B - Technical Dimensional Engineering Drawings,
C - Data sheet,
Provide initial insurance of 7500.000 LYD(Libyan Dinars) or $1750.00 (American Dollars)
To be attached with the unquoted financial offer in form of a certified cheque or an unconditional irrevocable letter bank guarantee issued by a commercial banks operating in Libya or first-class international bank.
The bank guarantee Validity period should not be less than 60
days
.based on the offer expiry date