Provision of Solids Control Services to Support Tender - 36720658
Tender notice from Nigeria, published on 01 Oct 2019.
Executive Summary
The CHEVRON NIGERIA LIMITED has issued a Tender notice for the procurement of a Provision of Solids Control Services to Support Offshore Drilling and Completion Operations in the Nigeria. This Tender notice was published on 01 Oct 2019 and is scheduled to close on 23 Oct 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 36720658, while the tender notice number is CNL.00000183 and Register on the platform.
Key facts
Summary
Provision of Solids Control Services to Support Offshore Drilling and Completion Operations
Tenders are invited for Provision of Solids Control Services to Support Offshore Drilling and Completion Operations Interested Applicants must be able to provide the fol lowing as required for Offshore Solids Control Services: Contractor must be able to provide Solids control equipment and fully trained and qualified personnel for the drilling rig operations. Contractor must be able to supply retort kits, weight scales and other essential equipment for assessing solids control equipment efficiency and oil on cuttings. Personnel will be fully trained and expected to make use of this equipment for analysis to the Company’s policies and standards. Contractor must be able to carry spare parts at their bases in Port Harcourt and/or Escravos to support operations for 6 months of drilling activities for each type of equipment i.e.: centrifuges, pumps, dryers, augers, auger drives and electrical control spares for each type of equipment. Solids control equipment includes, but not limited to: (i) Centrifuge system(s): Fully variable speed centrifuges capable of processing 200 gallons per minute of 10 ppg mud. These centrifuges must achieve a D 90 cut point of less than 3 microns. (ii) Cuttings Dryer Units: Capable of processing up to 30 tons per hour and reducing oil on cuttings to less than 5% measured by weight (wet). The contractor may need to supply 2 of these units per drilling rig. MANDATORY TENDER REQUIREMENTS: (A) To be eligible for this tender exercise, interested bidders are required to be prequalified and ‘live’ in the NipeX Joint Qualification System (NJQS) database Categories 3.04.13 (Drilling Fluids/Mud Services). All successfully pre- qualified bidders in this category by the bid close date will receive Invitation to submit Technical and commercial Tender (ITT). (B) To determine if an intended bidder is pre-qualified and in order to view the product/ service category that such bidder is listed for: Open http://vendors.nipexjqs.com and access NJQS with your company log in detaiIs, click on Products/Services tab to view your status and product codes. (C) If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 8 – 10, Bayo Kuku Road, lkoyi Lagos with your DPR certificate as evidence for verification and necessary update. (D) To initiate and complete the NJQS prequalification process, access www.nipex-ng.com click on services tab followed by NJQS registration. (E) To be eligible, all tenders must comply with Nigerian Content requirements in the NipeX system. NIGERIAN CONTENT: CNL is committed to the development of the Nigerian Oil and Gas business in accordance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010. Pursuant to the enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the levels set in the schedule of the NOGICD Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB). Interested bidders shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in the next tender stage The following are the Nigerian Content requirements bidders are expected to comply with in their technical bid submission. Demonstrate that the entity is a Nigerian Indigenous Company, or Nigerian Indigenous Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
Furnish details of company ownership and share holding structure; submit clear photocopies of your CAC Forms CAC2, CAC 7.
Provide evidence of what percentage of 1) your key management positions is held by Nigerians and 2) what percentage of the total work force are Nigerians; show overall percentage of work to be performed by Nigerian resources relative to total work volume.
Provide a Nigerian Content Plan providing a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that would be involved in executing the work; provide details of Nigerian Content focal point or manager.
State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well- equipped offices and workshop; attach past experience of such patronage.
Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box),
Location of in-country facilities, (Equipment, Storage, Workshops, repair & maintenance facilities and testing facilities).
Contractor must be willing and able to provide evidence of maximization of made in Nigerian goods and services.
Provide details of any other Nigerian content initiative your company is involved in.
Provide evidence of MOU with OGTAN registered trainer to conduct classroom module of training and on the job attachment.
Provide human capacity building development plan including budget which must be a minimum of 10% of project man-hours or cost. Training will be targeted at developing capacity other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers utilized to cover classroom modules.
Provide details of equipment ownership.
Bidders (Vendors, Original Equipment Manufacturers-OEMs, and EPC Contractors) are required to present Nigerian Content Equipment Certificate (NCEC) issued by Nigerian Content Development and Monitoring Board (or evidence of application for the certificate) in respect of any components, spares, equipment, systems and packages to be used in the proposed project under tender.
All bidders for a project/contract/service with a completion period of 12 months or more are required to submit as part of the Nigerian Content requirement, a signed Memorandum of Agreement (MOA) between it and one of the research and development (R&D) Clusters established by the Nigerian Content Development and Monitoring Board (NCDMB). The MOA shall be relevant to the project and shall indicate how the bidder intends to use the relevant R&D Clusters during project execution.
CLOSING DATE: Only bidders who are registered with NJQS Product/Category 3.04.13 (Drilling Fluids/Mud Services) by 16:00 Hours, Wednesday 23 October, 2019 being the advert close date shall be invited to submit technical and commercial bid. Additional Information: (1) Intending bidders eligible for this tender opportunity are expected to be prequalified in NJQS under the above product/service categories. (2) The ITT and any further progression of this tender shall be via NipeX. (3) All costs incurred by interested bidders in preparing and processing NJQS prequalification shall be solely for the interested bidders’ accounts. (4) This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL and or any of its partners or affiliates by virtue of such companies having been prequalified in NJQS. (5) The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical and commercial tenders first. Following a technical review, only technically and financially qualified bidders will have their commercial tenders opened. (6) CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.
The bid deadline for Provision of Solids Control Services to Support Offshore Drilling and Completion Operations was 23 Oct 2019. Bidding is closed.
This tender has been issued by CHEVRON NIGERIA LIMITED in Nigeria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 76430000 - Well-drilling and production services.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 36720658. The purchaser document reference is CNL.00000183.