Provision of Onshore Drilling Services Tender in Nigeria - 53639790
Tender notice from Nigeria, published on 01 Jun 2021.
Executive Summary
The STERLING OIL EXPLORATION AND ENERGY PRODUCTION COMPANY LIMITED has issued a Tender notice for the procurement of a Provision of Onshore Drilling Services in the Nigeria. This Tender notice was published on 01 Jun 2021 and is scheduled to close on 25 Jun 2021, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 53639790, while the tender notice number is and Register on the platform.
Tenders are invited for Provision of Onshore Drilling Services for Sterling Operating PSC Blocks OML 143, OML 146, OPL 2005, OPL 2006 & OPL 2004 (A) Provision of Mud Engineering Services (Tender No. 1000004705) CATEGORY: 3.01.15 (Mud Engineering Services)
Bidder shall provide Mud Engineering Services, provide all requisite mud chemicals for water and synthetic oil-based mud systems, and relevant additives for drilling and completion of the wells. Mud Engineering Services shall be in accordance with the modern mud systems and Bidder should be capable of providing design, development, and implementation of same. Bidder should be able to provide liquid mud plants and sufficient stocks of mud chemicals in country.
(B) Provision of Coil Tubing and Nitrogen Simulation Services (Tender No. 1000004710) CATEGORY: 3.04.18 (Well Overhauling / Simulation Services)
Bidder shall supply equipment, personnel, and services to perform Coil Tubing Operations, Nitrogen, and Simulation in live gas and oil wells. Bidder shall supply the equipment including but not limited to Coil tubing, power packs, control cabin, guide arch, injection head, Coiled tubing BOP (Quad), High-pressure pumping units, data acquisition system, coiled tubing accessories like motors, connector, jets, mills, Nitrogen storage tanks, supply of Nitrogen, Nitrogen pumping unit etc.,
(C) Provision of Downhole Tools and Fishing Services (Tender No. 1000004715) CATEGORY: 3.04.11 (Fishing/Wireline Fishing Services) & 1.01.06 (Fishing and Repair Tools (Drilling))
Providing drilling and fishing tools, services, and qualified personal for vertical, deviated sidetracked and / or horizontal wells:
• Complete set of drilling equipment i.e. drilling jars, accelerator, stabilizers, etc with requite cross-overs.
• Complete set of downhole fishing equipment for drilling and completion operations.
The Scope of Services shall be to carry out DSTI TCP job in a single or more zones:
• Design, and Develop programme for DST & TCP, supervise and execute DST ITCP jobs
• Provision for tools and equipments including but not limited to Retrievable packers. Circulating valves, Tester Valves, jar, safety joint, RA marker sub Pressure and Temperature recorders, crossovers, pup joints and any other parts and materials required to perform DST jobs.
• Provision for tools and equipments including but not limited to Tubing Conveyed Perforation (TCP) tools, TCP guns. Mechanical & Hydraulic Firing head, charges for the guns. Mandatory:
• To be eligible for this tender exercise, only interested Bidders are required to be pre-qualified in the Product Service Category (as mentioned against tender under SI. No. 2 ‘Scope of Work/Service Requirements- above) in NipeX Joint Qualification System (NJQS) database. All successfully pre¬qualified Bidders in the above category by the Bid close date will receive invitation to Technical Tender (ITT).
• Please note, interested bidders including their sub-contractor(s) shall be required to:
• Meet all JQS mandatory requirements to be listed as “PRE-QUALIFIED” for a category in the NJQS database.
• Meet all Nigerian Content requirements stated in this advert in their responses to the invitation to technical tender. (Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.)
• To determine if you are pre-qualified and view the product/service category you are listed for: Open http://vendors.nipex-ng.com and access NJQS with your log-in details, click on continue Joint Qualification Scheme tool, click check ‘My Supplier Status- and then click ‘Supplier Product Group-.
• If you are not listed in a product/service category noted above, and you are registered with DPR to do business for this category, please contact Nipex office at 8/10 Bayo Kuku Road Ikoyi Lagos with your DPR certificate as evidence for review and necessary update.
• To initiate and complete the JQS pre-qualification process, access www.nipex-ng.com to download the application form, make necessary payments, and contact Nipex office for further action. Note:
• Suppliers eligible for this tender opportunity are expected to be pre¬qualified in NJQS under the specified product/service category.
• The invitation to tender (ITT) and any further progression of this tender shall be via Nipex. Interested bidders are therefore advised to ensure they are set-up in Nipex with a valid and active official company email address accessible by all in their organization as this shall be the only means to transmit the ITT.
• All costs incurred in preparing and processing NJQS prequalification shall be to the contractors- accounts.
• This advertisement shall neither be construed as any form of commitment on the part of STERLING to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle pre¬qualified companies to make claims whatsoever, and/or seek and Indemnity from STERLING and or any of its partners by virtue of such companies having been pre-qualified in NJQS.
• The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically qualified contractors will be requested to submit commercial tenders.
• STERLING / NNPC reserve the right to reject any and or all pre-qualified supplier at its sole discretion and at no cost whatsoever.
• STERLING will communicate only with authorized officers of the pre- qualifying companies and NOT through individuals or agents.
The bid deadline for Provision of Onshore Drilling Services was 25 Jun 2021. Bidding is closed.
This tender has been issued by STERLING OIL EXPLORATION AND ENERGY PRODUCTION COMPANY LIMITED in Nigeria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 53639790. The purchaser document reference is not provided in the notice.
Browse other tenders from Nigeria or search by relevant keywords and CPV classification.