Provision of Drilling Tools & Equipment Rental Tender - 54070399
Tender notice from Nigeria, published on 12 Jun 2021.
Executive Summary
The SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED has issued a Tender notice for the procurement of a Provision of Drilling Tools & Equipment Rental Services in the Nigeria. This Tender notice was published on 12 Jun 2021 and is scheduled to close on 02 Jul 2021, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 54070399, while the tender notice number is NNPC/SPDC/TEPNG/AGIP JOINT VENTURE and Register on the platform.
Key facts
Summary
Provision of Drilling Tools & Equipment Rental Services
Tenders are invited for Provision of Drilling Tools & Equipment Rental Services. 1. INTRODUCTION SPDC hereby invites reputable and competent Nigerian Companies with the requisite expertise, experience, skilled manpower, and technology to apply to be considered for inclusion in the bid list for the above contract. 2. SCOPE OF WORK/SERVICE REQUIREMENTS The Contract is sub-divided into four (4) Packages: A. Provision of Casing and Tubular Running Services B. Provision of Downhole Tools Services (including drill string rentals, Red Adair/Emergency Response services, Movable yard services) C. Provision of Fishing & Milling Services D. Provision of Solids Control Services Contractors are invited to bid for one or more of these packages, if qualified. If bidding for more than one (1) package, separate bids must be submitted for each package. A. Provision of Casing and Tubular Running Services CONTRACTOR shall direct, supervise, and control the provision of Casing and Tubular Running Services and associated operations as defined herein, and assume liabilities as provided in the Contract. Consequently, CONTRACTOR shall: 1. Provide full suite of Casing and tubular running equipment and spares (including casing circulating packers) necessary to deliver the required work 2. Provide casing drive system tools and equipment 3. Provide chrome tubular running equipment 4. Provide automated tubular connection integrity systems and equipment capable of utilizing Artificial Intelligence to eliminate connection make-up/break-out errors 5. Provide Tubular bucking service 6. Provide operation, maintenance, inspection, redressing, calibration and repair services for all casing and tubular running equipment. 7. Provide supply, quality assurance and transportation of Casing and tubular running equipment as required 8. Provide high quality engineering support to the Well Delivery Team by using the contractor-s available expertise, databases and computer modeling systems; this shall include (but not be limited to) performing Slip Crushing calculations (to ensure that elevator and or spider slips do not crush tubing or casing), preparation of tubular tallies, preparation of standard step-by-step procedures, contingency measures, anticipated tool requirements, and anticipated cost 9. Provide detailed end-of-job report and Post-Job Evaluation Reports, including detailed event assessment reports for equipment failures 10. Provide inventory Control, Stock Taking Analysis and general warehouse management for applicable equipment 11. Provide well site personnel and shore logistical and maintenance personnel and equipment for the safe and efficient execution of the work. B. Provision of Downhole Tools Services CONTRACTOR shall direct, supervise, and control the provision of Downhole Tools Services and associated operations as defined herein, and assume liabilities as provided in the Contract. Consequently, CONTRACTOR shall: 1. Provide drill string rentals, inspection, preservation and handling services 2. Provide full-scale machine shop fabrication service 3. Provide crossover rental service 4. Provide enhanced Drilling Tools including (but not limited to) rotating mousehole, torque twister, pneumatic wrenches, and spiro-torque tools 5. Provide tubular bucking service 6. Provide movable yard personnel and equipment maintenance services 7. Provide lifting & hoisting Equipment Inspection and Certification service 8. Provide Corrosion control service 9. Provide operation, maintenance, inspection, redressing, calibration and repair services for Red Adair/Emergency well control equipment 10. Provide high quality engineering support to the Well Delivery Team using the contractor-s available expertise, databases and computer modeling systems 11. Provide supply, quality assurance and transportation of Downhole tools and equipment as required 12. Provide detailed end-of-job report and Post-Job Evaluation Reports, including detailed event assessment reports for equipment failures 13. Provide inventory Control, Stock Taking Analysis and general warehouse management for applicable equipment 14. Provide well site personnel and shore logistical and maintenance personnel and equipment for the safe and efficient execution of the work. C. Provision of Fishing and Milling Services CONTRACTOR shall direct, supervise, and control the provision of Fishing and Milling Services and associated operations as defined herein, and assume liabilities as provided in the Contract. Consequently, CONTRACTOR shall: 1. Provide full suite of Fishing tools, equipment and consumables required to deliver the work including ‘special- fishing tools and equipment 2. Provide whip stock equipment and running services 3. Provide Under reamer equipment and running services 4. Provide Redress and manufacture mills 5. Provide supply, quality assurance and transportation of Fishing tools and equipment as required 6. Provide operation, maintenance, inspection, redressing, calibration and repair services for Fishing tools and equipment 7. Provide detailed end-of-job report and Post-Job Evaluation Reports, including detailed event assessment reports for equipment failures 8. Provide high quality engineering support to the Well Delivery Team by using the contractor-s available expertise, databases and computer modeling systems; this shall include (but not be limited to) preparation of tubular tallies, preparation of standard step-by-step procedures, contingency measures, anticipated tool requirements, and anticipated cost 9. Provide inventory Control, Stock Taking Analysis and general warehouse management for applicable equipment 10. Provide well site personnel and shore logistical and maintenance personnel and equipment for the safe and efficient execution of the work. D. Provision of Solids Control services CONTRACTOR shall direct, supervise, and control the provision of Solids Control Services and associated operations as defined herein, and assume liabilities as provided in the Contract. Consequently, CONTRACTOR shall: 1. Provide solids control tools, equipment and consumables (including but not limited to Centrifuges, Cuttings Dryer, Auger, Mud Vac unit, Auger, shaker screens) required to execute the work efficiently 2. Provide periodic and routine maintenance schemes including the supply of necessary equipment spare parts to facilitate regular support to drilling operation at zero downtime 3. Provide personnel to man, operate, maintain, inspect, calibrate and repair all Solids control equipment, to ensure solids content of drilling fluid is within tolerant envelope specified in the drilling program 4. Provide supply, quality assurance and transportation of Solids control equipment as required 5. Provide detailed end-of-job report and Post-Job Evaluation Reports, including detailed event assessment reports for equipment failures 6. Provide high quality engineering support to the Well Delivery Team by using the contractor-s available expertise, databases and computer modeling systems 7. Provide inventory Control, Stock Taking Analysis and general warehouse management for applicable equipment 8. Provide well site personnel and share logistical and maintenance personnel and equipment for the safe and efficient execution of the work 3. MANDATORY REQUIREMENTS • To be eligible for this exercise, interested Tenderers are required to be prequalified in the appropriate Product/Service Categories in the NipeX Joint Qualification System (NJQS) database. A. Casing and Tubular Running Services: Product/Service Category 3.04.04 B. Downhole Tools Services: Product/Service Categories 3.04.23, 3.04.24, 3.04.33, 3.04.34, 3.04.35, 3.04.36, 3.13.07, 3.13.08 C. Fishing & Milling Services: Product/Service Categories 3.04.11 D. Solids Control Services: Product/Service Categories 3.04.13 • All successfully pre-qualified suppliers in this category will receive an Invitation to Tender (ITT). However, only TENDERERs who pass the Nigerian Content requirements evaluation as well as the Technical evaluation will have their Commercial bids opened. • To qualify, you must have a category C Nigerian Content Equipment Certificate (NCEC) issued by Nigerian Content Development and Monitoring Board (NCDMB) for the relevant service package. Only Tenderers who fulfill this requirement will be invited for the Tender. • To determine if you are pre-qualified and to view the product/service category you are listed for, log on to http://vendors.nipex-ng.com and access the NJQS with your log in details, click on “Continue to Joint Qualification Scheme tool”, click on “check my supplier status and then click “Supplier product group”. • If you are not listed in a product/service category and you are registered with the Department of Petroleum Resources (DPR) to do business, contact the NipeX office at 8 Bayo Kuku Road off Alfred Rewane Road, Ikoyi, Logos with your DPR certificate as evidence for verification and necessary update. All costs incurred in preparing and processing NJQS prequalification shall be borne by the TENDERER. • To initiate the NJQS prequalification process, go to www.nipex-ng.com to download the application form, make necessary payments and contact the NipeX office for further action. • To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system. 4. NIGERIAN CONTENT REQUIREMENTS Tenderers are to note that they will be required to give full details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Development (NOGICD) Act, 2010 as non-compliance will constitute a FATAL FLAW in all tender evaluations. In line with the above, Tenderers will be required to ensure that information on the following, among others, i
The bid deadline for Provision of Drilling Tools & Equipment Rental Services was 02 Jul 2021. Bidding is closed.
This tender has been issued by SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED in Nigeria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 54070399. The purchaser document reference is NNPC/SPDC/TEPNG/AGIP JOINT VENTURE.
Browse other tenders from Nigeria or search by relevant keywords and CPV classification.