Procurement Summary
Country : Libya
Summary : Provision of Artificial Lift System, Electrical Submersible Pump (ESP) and Well Testing Services to Enhance the Productivity of Low Pressure Oil Wells
Deadline : 30 Nov 2018
Other Information
Notice Type : Tender
TOT Ref.No.: 28694871
Document Ref. No. :
Competition : ICB
Financier : Self Financed
Purchaser Ownership : -
Tender Value : Refer Document
Purchaser's Detail
Purchaser : ZALLAF LIBYA EXPLORATION AND PRODUCTION OF OIL AND GAS COMPANY
Dat El-Imad Complex, Tower 3, Floor 9, P.O Box 91151, Tripoli,
Tel: +218-914798209,
Attn: Mohamed Abdullah Majdoub
Libya
Email :tender@zallaf.com
Tender Details
Tenders are invited for Provision of Artificial Lift System, Electrical Submersible Pump (ESP) and Well Testing Services to Enhance the Productivity of Low Pressure Oil Wells at NC-200 Onshore Fields.
Location: OnshoreNC200 block located in Libyan Murzuq Basin, about 800 km southwest of Tripoli.
1-Project Main Objectives
Zallaf, Operator of NC200 block in Murzuq basin is scouting and pre-qualifying Libyan and international market for an Artificial Lift System, Electrical Submersible Pump (ESP) and well testing services to enhance the productivity of low pressure oil wells at NC-200 Onshore Fields.
2-Scope of Work
The scope of work defined here below pretends to be an exhaustive description of the supplies and services to be provided by the selected contractor(s) for NC-200 ESP operationsand well testing services. Specialized ESP contractor(s) are invited to complement the list including any addition deemed relevant. Altogether, services and supplies shall guarantee the good performance of oil producers and water source wells equipped with ESPs, the work shall include all the following actions:-
· Conduct a site survey to assess technical and logistical needs.
· Procurement, Inspection and Testing of Materials.
· Provide full set of well Testing Services equipment accordance to technical specifications.
· Provide six (6) sets of Artificial Lift Systems (ESP) with other associated equipment/tools accordance to technical specifications.
· The expected lowest total flow rate will be 4000 bbls/d with range of (200 to 2000) bbls for every well.
· The maximum reservoir temperature °F180 and maximum pressure 1900 psi.
· The maximum total depth for NC-200 oil wells is +/- 4500 ft. with 9 5/8’’ casing and 3 ½’’ tubing.
· The maximum total depth for NC-200 water wells is +/- 6000 ft. 8 ½’’ OH and 5’’ tubing.
· Design and selection of all surface and downhole equipment with specialist assistance installing surface components.
· Specialist assistance making up and running in the hole-pulling out of ESP assemblies.
· Warehouse management program for surface-downhole equipment and consumables (limited number of pump types).
· Implement a continuous improvement program
· Train Zallaf staff on design, installation and operation of all surface and downhole equipment, in particular:
ØData analysis and pump performance diagnosis,
ØPump design and equipment selection,
ØInstallation and commissioning of downhole and surface equipment,
ØSurface electrical equipment performance monitoring,
· Used materials should be of high quality and accordance to standard specifications.
· Repair workshop located in Libya or country with good air and sea transport communications with Libya.
· HSE procedures should be observed in implementation of the work.
· Equipment supply on rental or purchase basis:
Surface:
- Transformer, Switchboard, Variable Speed Drive, Soft starter, Junction box
- Electrical generator, Surface wiring, Wellhead penetrator, Consumables
Downhole:
- Pump discharge, Multistage pump modules, Pump intake, Protector, Motor
- Motor Lead Extension, Y-tool, Downhole P-T sensor, Gas separator, shroud, etc.
- Downhole electrical armoured cable (round or flat), Consumables
Note:Electrical surface equipment, downhole power cable and ESP assembly components detailed specifications will be defined at a later stage with the collaboration of selected contractor(s).
Documents
Tender Notice