MULTIPLE SUPPLIERS FOR PROVIDE HYDRAULIC PNEUMATIC Tender - 92429964
Tender notice from South Africa, published on 20 Nov 2023.
Executive Summary
The ESKOM has issued a Tender notice for the procurement of a MULTIPLE SUPPLIERS FOR PROVIDE HYDRAULIC PNEUMATIC AND ENGINEERING SERVICES FOR A PERIOD OF SIXTY MONTHS (5 YEARS) ON AN AS AND WHEN REQUIRED BASIS in the South Africa. This Tender notice was published on 20 Nov 2023 and is scheduled to close on 30 Nov 2023, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 92429964, while the tender notice number is ERI/2023/LS/16 and Register on the platform.
Key facts
Summary
MULTIPLE SUPPLIERS FOR PROVIDE HYDRAULIC PNEUMATIC AND ENGINEERING SERVICES FOR A PERIOD OF SIXTY MONTHS (5 YEARS) ON AN AS AND WHEN REQUIRED BASIS
Description : MULTIPLE SUPPLIERS FOR PROVIDE HYDRAULIC PNEUMATIC AND ENGINEERING SERVICES FOR A PERIOD OF SIXTY MONTHS (5 YEARS) ON AN AS AND WHEN REQUIRED BASIS Scope Details : Background The Multi-axle division has Super Abnormal vehicles that transport loads in excess of 35tonnes up to 500tonnes for Eskom, these specialized equipment in the Logistics fleet and they need to be maintained effectively to avoid major breakdown and on-route delays. Place of work: -trailers may be parked in the yard Logistics Yard or located across SA. A pricing schedule must be included for servicing and/or maintaining outside the yard. Note: we do not pose associated tools for this service hence the supplier must be equipped to perform this service at our yard and across the road (mobile unit). Tasks • To inspect, strip and quote on all hydraulic cylinders • To report on stripped cylinders specifying on normal wear and tear, abuse, engineering design, inferior part or missed supersession. • Measure all parts to determine if they are within specification. • To refurbish all worn parts if necessary. • To polish cylinder bores to required specification. • To grind and chrome gland to OEM specification tolerance. • To quote on services, best equal, matching or original equipment manufacturer par. • To assemble cylinder as specified by OEM manual. • To replace all seals with prior to delivery. • To test cylinders for leaks prior to delivery • To inscribe a job number on the cylinder on an easily accessible position. • To provide all hydraulic pumps, pipes, valves, control banks, tanks, and fluid services and parts as and when required. • To provide all pneumatic (air) service comprising of compressor (part and replacement), air pipes, hose clamps, air valves air tanks and brake boosters. • To provide all engineering service, fabrication and modification on al Multi-Axle fleet. • To provide all necessary warranties and after sales services support as necessary. • To provide cost effective expertise on all engineering work. • To have a solid national footprint • To ascribe to all necessary ERI values. PNEUMATIC SYSTEM The Pneumatic system shall be inclusive of all hoses, piping, bends, valves, fluid, pumps, reservoir, gauges, etc. necessary to complete the trailer operating pneumatic system. Its main use is to provide a braking force to the complete trailer or total combination when inter-connected with other fleet. The total system must be repaired/replaced inclusive of safety relief valves, gauges tested and certified, piping, coupling, etc. These must be checked and rectified when putting the system back on line: • proper connection to all circuits • Clogged air filters • Dirt in the circuit -test and commission -handover with certificate of proof PART A: Trailer Service and Maintenance required -Yearly service -Maintenance/overhaul every five years -Breakdowns/repairs, as and when required, across SA depending on the failure occurred. Quarterly Service shall include, but not limited to: -Visual inspection of the pneumatic circuit and recommend resolution thereof, i.e. the state of pipes under operation, etc. -check and repair all leaks -tighten loose ends -check operation and ensure trailer reliability -Clean the filters of the pneumatic circuits -check the braking effect of the trailer -check the braking compressor -assessment of state of trailers and feedback via reports to Logistics Maintenance/overhaul -check piping connection and repair if necessary for wear and tear -change the braking components -check all valves, couplings, and associated equipment necessary to complete the pneumatic circuit for operation and repair/replace as necessary -calibrate and supply certificates for valves - adjust brakes; check brake stroke, correct position of the adjustable lever, if necessary, on the cam shaft, in order to draw the brake linings nearer -change the piping every 60 months or 300000km -Refill the system -Commission and test, then handover to Operations Breakdowns/Repairs -attend to breakdowns as they occur -troubleshooting and ensuring productivity -guaranteeing and commissioning the work Expectations: -Recommendations on improving the life of the fleet -Quarterly reports of the state of the fleet -Maintenance plan to align to embargo dates for the fleet for each trailer -Circuit drawings on how the system is lined up per trailer -A file depicting modifications and failures & solutions per trailer, supported by drawing -All drawing shall be in CAD format and hard copies available in the trailer files -Quality work at all times -training/transfer of skill to ensure productivity on minor adjustments that can be made by a lay person -all tools and equipment shall be for the contractor to service and maintain Quality of work -all work shall be of the highest quality and carry a minimum of 12 months for repairs. -all work shall be to restore the specified trailer to the design capacity -no inferior products are to be employed -part for part shall be replaced, i.e. flexible shall be flexible Warranty -All parts shall have a minimum warrantee of months All the listed text in this specification shall be complied with fully without compromise On reply to this request, please include the following: -A safety plan to carry out the work -Method statement to service and to maintain PART B: Supply of Pneumatic components This is inclusive of all equipment necessary to complete the circuit, such as valves, cylinders, piping, pumps, couplings, etc. Part for part replacement shall apply, usually a sample shall be provided or drawing for manufacture of new parts will be given. NB: this contract will be awarded to two suppliers Types Of Trailers in Logistics Services Trailer Combination Type of Design Capacity (t) SUPRA Cometto 2 x14 axle beam trailer - CJL485/6GP Monoblock 450 MIGHTY Nicolas 2 x 12 axle beam trailer - XRN437/979GP Monoblock 410 MONO Nicolas 2 x 13 axle beam trailer - ZSW423/435GP Monoblock 270 MINI Nicolas 2 x 11 axle beam trailer - YSN066/069GP Monoblock 235 MACRO Nicolas 2 x 10 axle beam trailer - CLJ432/492GP Monoblock 213 GIANT Nicolas1 - 20 axle - BB15NJGP Modular 600 GIANT Nicolas2 - 20 axle - BB15NYGP Modular 600 KOEBERG 20 axle - CJL490/491GP Modular 450 ULTRA1 Nicolas - 12 axle - CJL486GP Modular 250 ULTRA2 Nicolas - 12 axle - CJL487GP Modular 250 MOD 1 Nicolas 13 axle (11+2) - TPC095GP Modular 180 MOD2 Nicolas 13 axle (11+2) - TPC096GP Modular 180 Nicolas 12 axle (12 axles) - CJL479/80GP Modular 150 Nicolas 12 axle (6+6 axles) -CJL483GP Modular 150 Nicolas 8 axle gooseneck - CJL477GP Modular 100 Nicolas 8 axle gooseneck - CJL478GP Modular 100 Types Of Trailers Trailer Combination Type of Design Capacity (t) SUPRA Cometto 2 x14 axle beam trailer - CJL485/6GP Monoblock 450 MIGHTY Nicolas 2 x 12 axle beam trailer - XRN437/979GP Monoblock 410 MONO Nicolas 2 x 13 axle beam trailer - ZSW423/435GP Monoblock 270 MINI Nicolas 2 x 11 axle beam trailer - YSN066/069GP Monoblock 235 MACRO Nicolas 2 x 10 axle beam trailer - CLJ432/492GP Monoblock 213 GIANT Nicolas1 - 20 axle - BB15NJGP Modular 600 GIANT Nicolas2 - 20 axle - BB15NYGP Modular 600 KOEBERG 20 axle - CJL490/491GP Modular 450 ULTRA1 Nicolas - 12 axle - CJL486GP Modular 250 ULTRA2 Nicolas - 12 axle - CJL487GP Modular 250 MOD 1 Nicolas 13 axle (11+2) - TPC095GP Modular 180 MOD2 Nicolas 13 axle (11+2) - TPC096GP Modular 180 Nicolas 12 axle (12 axles) - CJL479/80GP Modular 150 Nicolas 12 axle (6+6 axles) -CJL483GP Modular 150 Nicolas 8 axle gooseneck - CJL477GP Modular 100 Nicolas 8 axle gooseneck - CJL478GP Modular 100 The minimum threshold for further evaluation will be 70% NB: There will be a site inspection
The bid deadline for MULTIPLE SUPPLIERS FOR PROVIDE HYDRAULIC PNEUMATIC AND ENGINEERING SERVICES FOR A PERIOD OF SIXTY MONTHS (5 YEARS) ON AN AS AND WHEN REQUIRED BASIS was 30 Nov 2023. Bidding is closed.
This tender has been issued by ESKOM in South Africa.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 92429964. The purchaser document reference is ERI/2023/LS/16.
Browse other tenders from South Africa or search by relevant keywords and CPV classification.