Contract notice: Roller-type shutters Tender in Germany - 38827996
Tender notice from Germany, published on 11 Dec 2019.
Executive Summary
The STADT LEVERKUSEN - FACHBEREICH RECHT UND ORDNUNG - ZENTRALE VERGABESTELLE has issued a Tender notice for the procurement of a Contract notice: Roller-type shutters in the Germany. This Tender notice was published on 11 Dec 2019 and is scheduled to close on 16 Jan 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38827996, while the tender notice number is 585606-2019 and Register on the platform.
Object of the contract Roller-type shutters Description: Contract notice: Roller-type shutters Authority Type: Regional or local authority Contact Nature: Works Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: Lowest price CPV code: 44115310, 44115900, 44115310, 44115900 CPV Description: Roller-type shutters. Sun protection devices. 212-2019, Sun protection works in the building monument, Energetic renovation Hauptgebaeude Catholic secondary school Im Hederichsfeld, 51379 Leverkusen Reference Number: 212-2019 Monument-protected school building, small-scale, deferent building, mostly 2-storey brick masonry construction with reinforced concrete and refurbished, slated load-bearing hollow bodyPerforated, teilunterkellert, with geschiefertem, expanded mansard roof chair with several use adjustments and redevelopment measures in the last century. Laying of the foundation stone 1913. Main Site: Catholic Secondary School in Hederichsfeld Type and extent of the service: 65 pieces External fly-gates with flat slats and rope guide, width approx. 1 350 mm, height approx. 2 550 mm, in the ground and 1st floor, historische plaster facade 4 pieces as before, however as 2nd emergency route with additional crank operation 7 piece as before, however height approx. 2 200 mm, in the basement floor 83 pieces aluminum angle panels, powder-coated, height approx. 175 to 195 mm, length up to 1.5 m 5 pieces External venetian blinds with flat slats and rope guide, width approx. 1 300 mm, height approx. 2 150 mm, installation in on-site drossing, im 2nd floor in dormers with built-in aperture 12 pieces as before, but width about 1 250 mm, height about 2 050 mm 2 pieces as before, but as a second escape route with additional crank operation 1 piece control center for up to to 4 facades 2 pieces Weather station weather station 1 piece Floor control 7 pieces Motor control units for 1 drive 6 pieces Motor control unitsfor 2 drives 16 pieces Motor control units for 3 drives 7 pieces Motor control units for 4 drives Mounting without gantry with mounting aid (see LV), facade partly difficult to access Further information: Qualified documentation as ancillary service. The bidder has submitting, with the submission of tenders, the following documents: 1) "Construction services tender" form; 2) Form"Self-declaration on the absence of exclusionary reasons" (https://www.leverkusen.de/vv/forms/17/EE_Nichtvor_von_Ausschlussgruenden.pdf); 3) Fulfillment and price list, or a copy made by the bidder or himself produced short version with written acknowledgment of the original of the service specification of the Auftraggebers. If a GAEB file (compulsory in .P84 or .X84 format) is submitted with the offer, the bidder must also provide the information required in the specification of services (in particular product information); 4) Bidder information list (unless the bidder information is already in the specifications have been registered). On special request by the client sind submit the following documents: 1. Proof of registration in the professional or commercial register of the place of business or residence or any other proof of the permitted professional activity in accordance with the legislation of the country of the Community or the State party to the EEA Agreement to which the company is a resident. A copy of the proven entry (excerpt of Registers) is sufficient. It should show that the company is authorized to provide the construction work in question. The extract may not be older than 6 months at the time the offer is opened. If the Bidder intends to make use of the services of other companies when fulfilling an order, he / she must inform the client of the suitabilityprove that they / they have the abilities and resources of other companies. He / she has to submit corresponding undertakings from these undertakings. If a bidder or a consortium intends to use the order of a third party, the principal may also submit all the documents referred to aboverequest that the disclosure is intended. The supporting documents must be provided on request within 6 calendar days. The tenderer must submit the following documents with the submission of the tender: 1. Declaration by an insurance company that the contractor has a professional liability insurance for at least 1.5 million EUR for personal injuryThe following documents must be provided on separate request by the contracting authority: 1) Proof of professional indemnity insurance (see above); 2) Certificate of non-objection in tax matters ( not older than 1 year) 3) Exemption certificate acc. - 48 EStG (to be submitted by the tenderer at the earliest with the first installment) 4) Certificate of social security contributions (at least the last 2 years); 5) Cumulation. If necessary for this contract with regard to the required economic and financial technical and professional capacity the capacities of other companiesprovided that the tenderer / tenderer proves that the funds required for this contract will actually be available to him / her. In this case, a corresponding letter of commitment must be submitted to these companies. 1) All necessary documents and documents for this procedure are available exclusively on the Internet at the website of theVergabemarktplatzes Rheinland at https://www.vmp-rheinland.de free of charge for download. The request for documents from the client is not possible; 2) The entire communication between the applicant and the bidder and the client is made in writing via the news function of the "Vergabemarktplatz Rheinland"; 3) Questions and information requestn to the procurement documents must be sent electronically to the Central Procurement Office by 12:00 noon on 6/1/2020; 4) For the evidence listed in section III.1): documents acquired by the Contractor for pre-qualification measures has, are legal. If these documents are freely available, they do not have to be submitted. Please enter inIn these cases your pre-qualification number. This also applies to subcontractors. Announcement ID: CXPTYY1Y89A. Internet address (URL): https://www.leverkusen.de
The bid deadline for Contract notice: Roller-type shutters was 16 Jan 2020. Bidding is closed.
This tender has been issued by STADT LEVERKUSEN - FACHBEREICH RECHT UND ORDNUNG - ZENTRALE VERGABESTELLE in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 44115310 - Roller-type shutters, 44115900 - Sun protection devices.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38827996. The purchaser document reference is 585606-2019.