Expired Tender Germany ICB TOT Ref. 42043722

Contract notice: Repair and maintenance services Tender - 42043722

Tender notice from Germany, published on 03 Apr 2020.

Executive Summary

The DEUTSCHES ZENTRUM FÜR LUFT- UND RAUMFAHRT E.V. (DLR) - OBERPFAFFENHOFEN has issued a Tender notice for the procurement of a Contract notice: Repair and maintenance services of radio transmitters in the Germany. This Tender notice was published on 03 Apr 2020 and is scheduled to close on 11 May 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42043722, while the tender notice number is 159667-2020 and Register on the platform.

Key facts

Summary
Contract notice: Repair and maintenance services of radio transmitters
TOT Ref. No.
42043722
Document Ref. No.
159667-2020
Country
Germany
Notice type
Tender
Competition
ICB
Publication date
03 Apr 2020
Bid deadline
11 May 2020
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Repair and maintenance services of radio transmitters
Description: Contract notice: Repair and maintenance services of radio transmitters
Authority Type: Other
Contact Nature: Services
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 50333100, 32352000, 32530000, 32352000, 50333100, 32352000, 32530000
CPV Description: Repair and maintenance services of radio transmitters.
Aerials and reflectors.
Satellite-related communications equipment.
Modernization of 9m antenna GARS O`Higgins
Reference Number: 533/2020/5060022
The DLR has only limited access to modernization and Refurbishment of the 9-meter antenna required technical documentation. Essential technical documents are only in the propertycurrently from VERTEX Antennentechnik GmbH, which, as the KRUPP company, develops the servo system for the 9-meter antenna,
Main Site: DLR research station "GARS O`Higgins" ANTARKTIS 30 km west of the northern tip of the Antarctic Peninsula approx ; 5754`02.96 "W.
- - For more information, see the complete tender documents. The following partial extract:
(minimum requirements):
As part of the exchangechs of the complete servo system (servo system upgrade), the following minimum functional requirements must be met:
1. The previous functional and performance-related specifications (see Chapter 7) must at least be met even after the servo system upgrade.
2. The antenna must continue to operate fully in the S and X band at wind speeds of up to 130 km / hnell can be used (i.e. in particular meet the pointing and tracking specification). The servo system must be designed in such a way that in operational operation at wind speeds of up to 130 km / h an ice layer of up to 6 cm on the main reflector is tolerated. In survival mode, the antenna is intended to withstand catabatic storms with wind speeds of up to 300 km / h without damagemarriages.
3. The existing coordinate transformation between the sky (AZ / EL) and the Schraegachs kinematics and the compensation of the feed rotation by the Schraegachsen geometry must remain.
4. Unbalance compensation must be implemented in the inclined axis so that the speed control in the inclined axis does not have to work against the unbalance.
5. The measured misalignmentthe azimuth axis must be compensated by a pointing error model.
6. Refraction compensation with a slalib correction model must be available for the new ACU for VLBI measurements.
The existing M&C interface protocol to the DLR Station Monitoring and Control System (SMCS) and to the VLBI remote control system must continue to be used when converting.
Functional Requestcatalog 3.3.1. Servo system. As before, the 9-meter antennas should be equipped with electrically tensioned drives in the main axes so that alignment inaccuracies can be reliably prevented by gearless ones Synchron-Servomotoren.
The servo system should as far as possible be designed so that the pointing and tracking requirements for future use of the antenna in the Ka-band can be met (if necessary at lower maximum wind speeds in the Ka-band).
The main components of the servo system are:
- Antenna Control Unit (ACU)
- Locking system with Sprogrammable logic controller (PLC) as core component and
limit switches power electronics / servo amplifier
- brushless synchronous servo motors
- position transmitter (encoder)
antenna control unit (ACU) conversion. The new ACU should meet the following requirements:
- Monitoring, control and regulation of the antenna including prevention of approaching
inadmissible end positionsrch software pre-limit switch and software limit switch coordinate transformation between headlining (AZ / EL) and AZ / inclined axis kinematics
- compensation of the feed rotation by the inclined axis geometry
- unbalance compensation for the inclined axis
- software corrector of the AZ axes inclination using a systematic pointing error model
- refraction compensation with slalib correction model fYour VLBI
- remote control interface via Ethernet TCP / IP
- ensuring the downward compatibility of the new M&C protocol in relation to the
M & C protocol used previously with regard to interfaces to the DLR Station Monitoring and Control System (SMCS) ([RD03]) and to the VLBI remote control system ([ RD04]) Extension of the M&C protocol with new functions (eg for TLE / OSV based program track,
Star Track) Unterstuetzung der folgenden Hauptbetriebsarten 2:
Stop Mode Preset Mode Preset STEP Mode Program TRACK Mode (Stack, TLE und OSV basiert) RATE Mode Stow Position Mode Boresight Position Mode Star TRACK Mode Star Track Step Mode Autotrack Mode Autotrack Backup Modes:
„Autotrack / Rate Memory Autotrack / Preset Autotrack / Position Memory Autotrack Search Spiral Autotrack / Program Track Autotrack / Program Track / Search Spiral Autotrack Additional functions Ignore Lock on Lock Test Track Limit El Track Error Limit Bandwidth "Supporting the" Green Mode "(not an independent operating mode, but the way in which the antenna procedure is designed to be as energy-saving as possible in the above operating modes ) The ACU should support remote / local operation.
Current excerpt from the HaCommercial register or a copy of the same (the extract must not be older than 6 months at the time of the deadline)
Turnover of the last 3 years (17, 18, 19) with at least double the order volume Insurance with minimum coverage:
Insurance property damage EUR 2, 000, 000 property damage EUR 1, 500, 000 Personal injury EUR 1, 000, 000.
Minimum requirements (as per item 3.2 of the specification)of the complete servo system (servo system upgrade), the following minimum functional requirements must be met:
1. The previous functional and performance-related specifications (see Chapter 6) must also be met at least after the servo system upgrade.
2. The antenna must continue to operate fully in the S and X bands at wind speeds of up to 130 km / hcan be used ionically (i.e. in particular meet the pointing and tracking specification). The servo system must be designed in such a way that in operational operation at wind speeds of up to 130 km / h an ice layer of up to 6 cm on the main reflector is tolerated. In survival mode, the antenna is supposed to withstand catabatic storms with wind speeds of up to 300 km / h without damagestand.
3. The existing coordinate transformation between the sky (AZ / EL) and the Schraegachs kinematics and the compensation of the feed rotation by the Schraegachsen geometry must remain.
4. Unbalance compensation must be implemented in the inclined axis so that the speed control in the inclined axis does not have to work against the unbalance.
5. The measured misalignmentThe azimuth axis must be compensated by a pointing error model.
6. Refraction compensation with a slalib correction model must be available with the new ACU for VLBI measurements.
Site visits to the Antarctic are not planned because it is not possible for logistical reasons.
1. There is the possibility for a virtual tour in the form of a video demonstrationthe antenna.
The DLR provides potential providers with a virtual 360 tour of the 9-meter antenna. This tour is accessible via the Internet and does not have to take place in the DLR. The access data are to be requested from the DLR by email,
(contact details see below).
2. As well as if necessary for inspection of paper files of the recordings of the manufacturer`s antenna in the DLR inOberpfaffenhofen.
The DLR enables potential providers to inspect the printed and electronic documents in the DLR Oberpfaffenhofen, which is to be agreed with the DLR beforehand.
A maximum of one working day (approx. 8 hours) is available for the inspection is protected by copyright, digitization or other reproduction is not necessaryno questions will be answered while you are viewing the documents. Please contact the options mentioned under 1.) and 2.) independently and in good time if necessary in contact with Mr. Robert Metzig:
E-Mail: Robert. [email protected] Tel. 08153 28 3070 To make a corresponding appointment, which is carried out individually for each bidder.
Also for the "activation via dthe Internet "for the virtual tour of the antenna.
The time period for an appointment is specified in the contract documents under" Appointments ".
Questions are not allowed for this appointment! Please note:
Possible bidder questions must then be submitted in writing using the appropriate tool / platform, so that the information is treated in the course of equal treatment of all biddersrmations can be communicated.
The technical specifications, the plans and data are detailed,
meaningful and allow a valid offer without a site visit in Antarctica, which is not possible for logistical reasons.
Internet address (URL): www.dlr.de

Documents

Tender Notice
Login to view

Similar tenders

Germany Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Repair and maintenance services of radio transmitters was 11 May 2020. Bidding is closed.

This tender has been issued by DEUTSCHES ZENTRUM FÜR LUFT- UND RAUMFAHRT E.V. (DLR) - OBERPFAFFENHOFEN in Germany.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 50333100 - Repair and maintenance services of radio transmitters, 32352000 - Aerials and reflectors, 32530000 - Satellite-related communications equipment.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 42043722. The purchaser document reference is 159667-2020.

See the Similar Tenders section on this page or browse other tenders from Germany.

This tender falls under Defence and Security, Computer Hardware and Software Services in Germany. Suppliers in these sectors can track similar Germany tenders using CPV-based alerts.