Tender notice from Germany, published on 26 Sep 2019.
Executive Summary
The GSI HELMHOLTZZENTRUM FÜR SCHWERIONENFORSCHUNG GMBH has issued a Tender notice for the procurement of a Contract notice: Radio-frequency booster stations in the Germany. This Tender notice was published on 26 Sep 2019 and is scheduled to close on 31 Oct 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 36670897, while the tender notice number is 452020-2019 and Register on the platform.
Object of the contract Radio-frequency booster stations Description: Contract notice: Radio-frequency booster stations Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 32233000, 32233000 CPV Description: Radio Frequency booster stations. High Frequency Amplifier Reference Number: 26/50062726 217-MHz Sourcing Proposal: Main Site: GSI Helmholtz Center for Heavy Ion Research GmbH Recently, the first section of a stand-alone superconducting continuous wave (cw) heavy ion linacs was put into operation taken and tested in detail with heavy ion beam from the GSI high-loading injector.With this demonstrator, the suitability of 217 MHz multi-gap crossbar H (CH) modalities for accelerating heavy ions has been impressively demonstrated. The world's first and most successful beam test with a superconducting multi-gap CH cavity is a milestone in the R & D work of the Helmholtz Institute Mainz (HIM) and the GSI in cooperation with the Goethe UniversityFrankfurt (GUF) in the cw-Linac project. The next step is the preparation of the first complete Linac cryomodule. This is equipped with 3 sc acceleration cavities and a sc-Rebuncher. The cw-Linac cryomodule, called the "Advanced Demonstrator", will be installed in the test bunker of the former demonstrator setup. The space required for particle accelerationHigh frequency power must be provided by suitable amplifiers. These must be able to deliver up to 3 kW in CW mode at 216.816 MHz. Since the superconducting high-frequency resonators permanently reflect up to 100% of the radiated high-frequency power, the amplifiers must be able to completely absorb this returning power without being harmed themselves and ohne to switch off. The manufacturer must also ensure the compatibility of the devices with the customer's electronic modules according to the specification. The order does not include the signal generation itself, nor the electronics for phase and amplitude control (LLRF), but exclusively the development and production of 4 power amplifiers. The production should be with oneAfter a successful test (FAT) of this "FoS" the further copies are to be manufactured. The offer should contain 3 options, which the supply of 6, 10 or 16 further devices See the information on the aptitude test provided with the tender documents. Documents to be submitted: - Eigenerklaeruto the suitability after -- 123, 124 GWB: Self-declaration that the knowledge is inaccurate according to -- 123, 124 GWB and the cases mentioned there are not present, - GSI form corporate representation (with the participation application to present by self-declaration): with indication of data requested on the GSI form, such as: Eg number of employees in the last 3 years, etc. Note: Will any of the gIf requested forms have not been submitted in due form or in due time, this may lead to the exclusion of the application for participation. Missing or incomplete documents may be requested by the awarding authority; Applicants can not be sure that a request will be made. At the end, missing evidence will lead to exclusion. Documents to be submitted: - Information on Gesasales and order-related sales (to be submitted with the request to participate by means of self-declaration): statement on the total turnover of the company and the turnover with regard to the special type of service, which is the subject of the award, in each case on the last 3 business years on the GSI form corporate representation, - proof of one Occupational / professional liability insurance (withThe insurance undertaking and the sum insured on the GSI form must be presented. Note: If one of the requested forms is not submitted in time or form, this may lead to the exclusion of the application for participation the contracting authority will be requested; the applicants can At the end, missing evidence leads to exclusion. In addition to the above mentioned forms, the following eligibility criteria, which are at the same time exclusion criteria, must be proven on the basis of references: - Proven manufacturing experience transistor amplifiers for applications on accelerators nach customer specification. The use of serial modules from broadcast applications is very limited possible. Radio frequency modules, power supplies and protective devices must be optimized for the intended application. - Proven experience in the production of high frequency transistor amplifiers for operation on resonant loads with permanently full reflection of the givenhigh-frequency performance, - Proven experience in the manufacture of RF transistor amplifiers with high-frequency output power 1 kW in the frequency range up to 400 MHz. Provision of a banking community acc. Payment plan for the first cash outflow after the order for advance payment in 2019 is a mandatory requirement. Please note the terms and conditions of a bank partnerships form 11_payment.pdf. The forms provided with the tender documents are to be completed in full, depending on the offer. Failure to submit or provide the requested documents as well as knowingly false declarations may lead to the exclusion of the tenderer from the award procedure. GSI reserves a one-time requestof documents within a period to be specified in the letter of formal notice pursuant to - 56 VgV. The bidders can not rely on a request. Finally, incomplete offers are excluded (- 57 para. 1 no. 2 VgV). Evaluation criteria: - Offer price 30% further divided into: - 70% total price of the main service, - 30% total price of the option. - Leis70% further subdivided into: - 35% Technical design, quality, - 25% maintainability, - 20% delivery time, - 10% quality assurance, communication and documentation, - 10% quality offer and presentation. The performance criteria are detailed in the application conditions. Announcement ID: CXS0YYEYDQM Internet address (URL): http://www.gsi.de
The bid deadline for Contract notice: Radio-frequency booster stations was 31 Oct 2019. Bidding is closed.
This tender has been issued by GSI HELMHOLTZZENTRUM FÜR SCHWERIONENFORSCHUNG GMBH in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 32233000 - Radio-frequency booster stations.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 36670897. The purchaser document reference is 452020-2019.
This tender falls under Computer Hardware and Software Services in Germany. Suppliers in these sectors can track similar Germany tenders using CPV-based alerts.