Contract notice: Network operating system Tender - 18600394
Tender notice from Germany, published on 25 Nov 2017.
Exeutive Summary
The NEW NETZ GMBH has issued a Tender notice for the procurement of a Contract notice: Network operating system in the Germany. This Tender notice was published on 25 Nov 2017 and is scheduled to close on 12 Jan 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 18600394, while the tender notice number is 471674-2017 and Register on the platform.
Object of the contract Network operating system Description: Contract notice: Network operating system Authority Type: Utilities entity Contact Nature: Services Procedure: Negotiated procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 32425000, 42961000, 42961200, 32425000, 32425000, 42961000, 42961200 CPV Description: Network operating system Command and control system Scada or equivalent system Supply and commissioning of a new cross-network control system for the NEW Netz GmbH for the networks electricity, gas, water and sewage. The NEW Netz GmbH is a network company Subsidiary of the NEW. NEW is a municipal utility company on the Lower Rhine. The group of companies includes severalsubsidiaries in Moenchengladbach, Erkelenz, Geilenkirchen, Grevenbroich, Viersen, Schwalmtal and Toenisvorst. Main Site: Moenchengladbach. Complete replacement of the network control system in operation by a new, largely standardized system with corresponding hardware and software components. These include details specification (system analysis), design, manufacturing, Werkftesting (FAT), delivery, installation, start-up inspection (SAT), trial operation complete system, instruction / training, acceptance and documentation. The new network control system must be completely set up by the bidder. The network control system must be written in German. The network control system to be procured must, inter alia, have the following functions: - pronounced SCADA functions inclessential archiving for all supply lines. - Topologically surveyed network representations for all sectors. - Functions for fault analysis (fault location) and network monitoring. - Automatic fault isolation and re-supply. - Online network calculations (node load adjustment, load flow calculation, short-circuit current calculation, compensation current calculation, voltage / reactive power Optimi - Automatic determination of limit value. - Protection calculation. - Simulation (state and value simulation through online network calculations). - Freely generated switching sequences, typed circuit programs. - Functions for system and grid safety management (feed-in management system). - Forecasting functions . - Monitoring functions in the water network. - Operation management / Circuit planning. - Functitraining and education. - Use of mobile components to perform supportive operations. - Multi-client capability. - Extensive information security services based on existing standards and guidelines ISO / IEC 27001, 27002 and 27019. and scope of services consists essentially of: - central redundant hardware at the main- and replacement site according to system configuration. - Workplaces in the network control center as well as in the replacement control center and other remote workstations (terminal server). - Interfaces into the office world and to other processing systems, control center connection to the upstream distribution system operator. - redundant process connection. - Users and System Software. - Data Administration System - Compliance with information security requirements. - All services necessary for project realization and implementation: a) Project management. b) System analysis / specification. c) Data modeling, data acquisition, parameterization and image generation. d) Delivery, installation, Commissioning, Trial Operation and Acceptance. E) Quality Assurance and Testing (Factory Function and Testing)nd commissioning inspections). f) Training for operating personnel and data and system administration. g) warranty / guarantee as well as maintenance during the limitation period of the defect claims. h) Maintenance contract for the maintenance and servicing after expiration of the limitation period of the defect claims. i ) complete documentation. The new network control system must comply with the requirementsInformation security pursuant to Section 11 (1a) of the EnWG and the related IT security catalog of the BNetzA suffice. a) Self-certification for exclusionary reasons under - 123 GWB. b) Self-declaration on exclusionary grounds pursuant to Section 124 GWB. c) Gewerbezentralregisterauskunft ( not older than 12 months). d) Registration of commercial register (not older than 6 months). A) Indication of Gtotal turnover of the last 3 completed business years as well as sales in the field of network control technology of the last 3 completed business years. Proof of liability insurance. Proof of the existence of liability insurance covering at least EUR 5 000 000 per loss event for personal injury insurance Material damage and 100 000 EUR for darau c) submission of economic information (eg Creditreform). 1) The award procedure will be applied uniformly to all services as a negotiated procedure in accordance with - 119 (5) GWB i.V.m. Section 13 (1) i. V. m. - 15 SektVO led. Initially, within the deadline specified in point IV.2.2 (12.1.2018, 10:00 am), applications for participation with the required Erkfiling and proof electronically via subreport (no offers yet). The application form to be used for this is available at www.subreport.de/E41616455. The under point IV.2.2. This deadline applies to the submission of the application form. The candidates selected for the negotiated procedure will be invited separately to submit tenders (see IV.2.3)ote are evaluated according to the extended guideline value method of the Federal Ministry of the Interior. The bid is awarded to the offer, which achieves the best rating according to this method. A description of the exact procedure is given in the tender dossier. 2) There is no reimbursement for the preparation of the application and the offer. 3) Members of the competitionCommunities are required to submit all statements / proofs for each member. Non-German documents must be submitted as a certified translation into German (minimum standard required). 4) Multiple applications are not permitted. A multiple application is also an application of different branches of a bureau. Multiple applications from members-A candidate or different branch of a bureau shall result in the withdrawal of all members of the consortium. 5) The application and tender documents will not be returned. 6) Non-compliance with the minimum standards ("self-declaration") required in the contract notice or tender dossier will result for non-participation in the proceedings. 7) BeAdvertisers must check the documents immediately for completeness of the documents and for any ambiguity. If the contract notice or tender documents contain ambiguities, contradictions or, in the opinion of the applicant, these violate applicable law, the candidate must notify the client immediately in writing. If this is not the case, the applicant is with the8) Applicants are subject to infringements of public procurement rules. The provisions of - 160 (3) GWB apply. In so far as their complaint is not remedied, they shall in particular be obliged to submit a petition for review within 15 calendar days of receipt of this notification to the relevant awarding chamber. Otherwise, the application is in accordance with - 160 Abs. 3 GWB inadmissible. 9) The awarding authority reserves the right not to respond to questions which have not been received by 10 days before the deadline at the latest. 10) Regarding item I.3) "Communication, Further information granted" Settlement The award procedure is carried out via the ELViS electronic allocation information system of the subreport contract platform (www.subreport-elvis.de)Questions from applicants or tenderers should be sent to the awarding authority electronically via subreport. Information shall also be given by the tendering authority only electronically via subreport. 11) When awarding the contract, the contracting authority shall comply with the provisions of the Tariffreue- u. Public Procurement Act of North Rhine-Westphalia (TVgG-NRW). He is therefore in agreementaccordance with - 9 para. 1 TVgG-NRW of the bidder who is to receive the contract (best bidder), the following evidence and explanations required by law: a) pledge to rate loyalty and minimum pay under - 4 TVgG-NRW; b) declaration of commitment to women's promotion according to - 8 TVgG-NRW; c) proof of compliance with minimum international standardsn Work organization according to the working conditions according to - 7 TVgG-NRW. The deadline for submission of evidence from the best bidder is 5 working days from the request. Internet address (URL): www.new-netz-gmbh.de Directive: Classical Directive (2014/25/EU)
The bid deadline for Contract notice: Network operating system was 12 Jan 2018. Bidding is closed.
This tender has been issued by NEW NETZ GMBH in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 32425000 ~ Network operating system ~ https://www.tendersontime.com/germany-tenders/network-operating-system-tenders/, 42961000 ~ Command and control system ~ https://www.tendersontime.com/germany-tenders/command-and-control-system-tenders/, 42961200 ~ Scada or equivalent system ~ https://www.tendersontime.com/germany-tenders/scada-or-equivalent-system-tenders/.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 18600394. The purchaser document reference is 471674-2017.
This tender falls under Computer Hardware and Software Services, Technology and Equipment in Germany. Suppliers in these sectors can track similar Germany tenders using CPV-based alerts.