Expired Tender Germany ICB TOT Ref. 35394457

Contract notice: Laboratory, optical and precision Tender - 35394457

Tender notice from Germany, published on 09 Aug 2019.

Executive Summary

The IHP GMBH - LEIBNIZ-INSTITUT FÜR INNOVATIVE MIKROELEKTRONIK has issued a Tender notice for the procurement of a Contract notice: Laboratory, optical and precision equipments (excl. glasses) in the Germany. This Tender notice was published on 09 Aug 2019 and is scheduled to close on 12 Sep 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 35394457, while the tender notice number is 376462-2019 and Register on the platform.

Key facts

Summary
Contract notice: Laboratory, optical and precision equipments (excl. glasses)
TOT Ref. No.
35394457
Document Ref. No.
376462-2019
Country
Germany
Notice type
Tender
Competition
ICB
Publication date
09 Aug 2019
Bid deadline
12 Sep 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Laboratory, optical and precision equipments (excl. glasses)
Description: Contract notice: Laboratory, optical and precision equipments (excl. glasses)
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: Lowest price
CPV code: 38000000, 38000000
CPV Description: Laboratory, optical and precision equipments (excluding glasses).
Micro Transfer Printer
Reference Number: IHP-2019-062
- Lot 1: Evaluation of Transfer Process with a Micro Transfer Printer,
Main Site: IHP GmbH Leibniz Institute for Innovative Microelectronics
Lot 1: Evaluation of a Transfer Process with a Micro-Transfer-Printer:
Demonstration of a Transfer Process at the InP-MembThe transfer punch should consist of a 150 mm square glass plate with PDMS silicone. The silicone was molded to form a series of pens corresponding to a particular chiplet size. The array is designed for photolithographic tolerancesMaterials provided by IHP:
- 4 x 2 inches. Wafer with InP (2.6 muem) on InAlAs (500 nm). The InAlAs layer serves as the sacrificial layer for the transfer process,
- 4 x 8 inches. Wafer with silicon dioxide (1 muem) on silicon. The roughness of the silicon dioxide layer is less than 0.5 nm. The following boundary conditions must be observed: The size of the membranes to be transferred is 350 muem x 50 muem x 2.6 muem,
- the placement accuracy must be / - 1.5 muem (3 sigma), - there must be no network layer, such as a. BCB between InP and silicon dioxide will be used.
After the evaluation has been completed, the IHP will be sent a process description to the IHP with at least the following points:
- description of the structuring and exposure process,
- description of the transfer parameters (eg.
The transfer punch,
- the transfer stamp supplied is intended to transfer 560 chips per cycle with an approximate life of 5, 000 cycles.
Lot 2: supply of a micro transfer printer
delivery of a manual micro transfer -Printers for the transfer of membranes with dimensions below 50 muem x 50 muem and a thickness of less than 2 muem.
The reasonHousing contains electronic components for control and safety. The rack components include motor drives and amplifiers for all axes, a system controller (PC) and an IO controller with PLC integration. The motion control is set up via the motion controller, which runs on a stand-alone real-time operating system on the PC. The PC and the necessarySoftware is included in delivery.
The transfer stamp consists of a 150 mm square glass plate with PDMS silicone. The silicone was molded to form a series of pens corresponding to a particular chiplet size. The array is designed for photolithographic tolerances. A stamp is included in the system and is included. The supplied stamp soll 560 chips per cycle with an approximate life of 5, 000 cycles.
The X and Y axes should consist of a combined platform of vertical linear servomotors. The axes of the Z and X, Y and Z optics are manual linear stages.
Theta X and Y are components of a tip-tilt mechanism built into the transfer printhead. Theta Z is a goniometer tablewith the print head as payload. The Theta Z and payload are mounted on the Z axis.
At least 2 cameras are included. A low magnification camera is used for coarse wafer registration and navigation. Another high magnification camera is used for alignment and print monitoring.
After the device and the installa have been manufacturedOn site, the device is qualified. The following material is used for the qualification:
- Chiplet (coupon) Material: Silicon Nitride,
- Chiplet (coupon) Dimensions: 40 Muem x 40 Muem x 1.2 Muem,
- Total number of transferred chips in 20 cycles: 11 200 Chiplets (coupons),
- the material on which the chips are to be transferred consists of silicon,
- theYield should be 98%,
- the precision should be / - 1.5 micron (3 sigma).
The delivery includes a pattern recognition software for the alignment. The software includes a free update for 1 year.
- Certification in tax matters.
The AG reserves itself prior to the award of the contract, a request to the relevant anti-corruption register and the Central Trade Register OfficeYou can register yourself voluntarily on the awarding platform "Vergabemarktplatz Brandenburg" and download the tender documents there in the tender documents or about answers to questions about
If you do not register, you are guilty of guilty debt, which means that you have to inform yourself whether the tender documents have been changed in the meantime and whether we have answered bidder questions on the award procedure Question about the procedure and for making an offer and sofIn any case, a registration is inevitable anyway in the actual procedure for submitting an application for participation or for submitting an interest confirmation.
The participation documents and the offer documents must be scannable and should not be bound or cloned.
Announcement ID: CXSTYYDYY35
Internet address (URL): https://www.ihp-microelectronics.com/en/start.html

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Supply of FPLC System (Chromatographs) ** Germany 152611205 17 Dec 2026
Operational Support of Deges-Geo Germany 152610500 20 Nov 2026
Point Dendrometer Germany 152610261 02 Dec 2026
Investigation of microclimatic effects in a vertically elevated agrivoltaic system ** Germany 152610084 11 Dec 2026
Optical Transmission Measurement System Germany 152607815 03 Dec 2026

Germany Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Laboratory, optical and precision equipments (excl. glasses) was 12 Sep 2019. Bidding is closed.

This tender has been issued by IHP GMBH - LEIBNIZ-INSTITUT FÜR INNOVATIVE MIKROELEKTRONIK in Germany.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 38000000 - Laboratory, optical and precision equipments (excl. glasses).

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 35394457. The purchaser document reference is 376462-2019.

See the Similar Tenders section on this page or browse other tenders from Germany.

This tender falls under Technology and Equipment in Germany. Suppliers in these sectors can track similar Germany tenders using CPV-based alerts.