Tender notice from Germany, published on 11 Jul 2017.
Executive Summary
The UNIVERSITÄT PADERBORN has issued a Tender notice for the procurement of a Contract notice: Foundry mould-forming machinery in the Germany. This Tender notice was published on 11 Jul 2017 and is scheduled to close on 11 Aug 2017, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 14749898, while the tender notice number is 265495-2017 and Register on the platform.
Object of the contract Foundry mould-forming machinery Description: Contract notice: Foundry mould-forming machinery Authority Type: Regional or local authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 43420000, 43420000 CPV Description: 2K thermoplastic injection molding machine with built-up handling robot and 2 gas control modules for the production of components with the injection molding process GITBlow. NUTS Code: DEA47 Main Site: Universitaet Paderborn; Warburger Str. 100; 33098 Paderborn. Should be procured-The delivery, the construction and the installation of a spraying machine. Notes: Insofar as only proprietary declarations are demanded, the client reserves the right to demand the corresponding certificates or proofs from the bidders in order to correct doubts. Copies of evidence are acknowledged provided they do not give rise to doubts about the consistency with the OriginaL. Please submit your proofs and explanations in the order given here. Should the required declarations or proofs be incomplete or inadequate, the tenderer may be excluded from the further procedure. A bidder can not be confident that the client has the opportunity to supplement or complete the contractU, however, he prefers. If the tenderer refers to the suitability of other companies (within the framework of a consortium or subcontractor), the respective declarations and proofs (especially proprietary notices and references) must be carried out by this or these companies. In addition, the bidder / bidder community has, prior to the request, made by the clientA declaration of commitment by the subcontractor (s). In addition, the contracting entity reserves the right to provide the necessary proof of its reliability, professional knowledge and performance, even before the subcontractors, who are not subcontractors, but do not refer to subcontractors for the purpose of proof of performance and specialist knowledgeSubcontractors and, where appropriate, a commitment declaration. Information and formalities necessary for evaluating if the requirements are met: Proofreading that: 1. The mandatory exclusions listed in Section 123 (1) to (4) of the GWB and 2. The compulsory exclusions listed in section 124 para. 1 GWB are not present and as far as that of FalL, measures for self-cleaning according to - 125 para. 1 p. 1 GWB may have been made, including the same, taking into account the requirements of section 125 para. 1 p. 1 GWB. The company is registered in a professional or commercial register. For the Member States of the European Union the corresponding comparable professional or commercial register entries must be shown. the-Is a member of a professional association. (Companies which do not have their registered office in the Federal Republic of Germany, specify the insurer responsible for them). Declaration of the existence of a compulsory occupational liability insurance, mentioning the insurer and the sum insured for personal injuries, property damage and property damage. Important note:-The notes in section III.1.1) regarding the demand for proofs and explanations shall apply mutatis mutandis. Weighting of the offers The evaluation of the tenders submitted is based on the weighting: Price 30%, Service 70%, Please refer to the tender documents for the explanation of the valuation method. Payment processing The payment processing for the written out is to be carried out in-Following milestones: 1. Milestone: 30% with order as advance payment / advance payment, 2. Milestone: 40% on delivery, 3. 30% after final acceptance and commissioning by the Contractor. Please note the following with regard to the first milestone: Advance payments are only made by the client on presentation of a direct and bank guarantee.-(If the bidder) is comparable to the most economically advantageous bid of a non-preferred bidder, the preferred bidder will be awarded the contract.-When assessing the viability of the tenders, the price offered by the preferred tenderers shall be taken into account at a rate of 15%. A prerequisite for taking account of the discount is that the production of the supplies offered is to a large extent carried out by the preferred bidders. This is especially the case when the value creation-By their employees is more than 10% of the net value of the purchased goods. EEE Any explanations regarding the suitability under III. Can be submitted by means of a bid by the Single European Self-declaration (EEE) (https://ec.europa.eu/growth/tools-databases/espd/filterlang=en). Requested to submit all the required declarations in the original by means of the FormulaIn the tender documents and formless statements to be made, only the company which is to be awarded the contract will be accepted. Announcement ID: CXS0YYPYYRY. Internet address (URL): www.uni-paderborn.de Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Foundry mould-forming machinery was 11 Aug 2017. Bidding is closed.
This tender has been issued by UNIVERSITÄT PADERBORN in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 43420000 - Foundry mould-forming machinery.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 14749898. The purchaser document reference is 265495-2017.