Contract notice: Desks Tender in Germany - 38395074
Tender notice from Germany, published on 28 Nov 2019.
Executive Summary
The THÜRINGER OBERLANDESGERICHT, GEMEINSAME VERWALTUNGSABTEILUNG, SACHGEBIET HAUSHALT UND BESCHAFFUNG has issued a Tender notice for the procurement of a Contract notice: Desks in the Germany. This Tender notice was published on 28 Nov 2019 and is scheduled to close on 20 Jan 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38395074, while the tender notice number is 563764-2019 and Register on the platform.
Object of the contract Desks Description: Contract notice: Desks Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 39121100, 39121100, 39121100 CPV Description: Desks. Procurement of elek. elevation-adjustable desks and disposal of old furniture together with related services Reference Number: 5400 E Verg - 11/19 The public contractor intends by means of a Europe-wide invitation to tender in accordance with - 15 I 1 VgV a supply contract for the procurement of electrically height adjustable desks and disposalof Altmobiliar together with associated services for judicial authorities of the Free State of Thueringen. If necessary, PC (CPU) brackets are also to be supplied and installed; see. For this, the executions in the respective contracts (Annexes R_1). There is a division into four partial lots; each of the partial lots is designed as a framework agreement. The detailedDefinitions of the services are to be taken from the respective contracts for each partial lot (Annexes R_1); Provisions concerning the framework agreement can be found in Annexes R_2. I) Main service obligations: 1) Overview This enumeration serves only to provide an overview of the services to be provided. The order of the individual services should not be predetermined and othe contractor will be in agreement (!) with the respective departments. 1) Delivery to the intended destination, s. below the predetermined number of electr. height-adjustable desks per office according to the A-criteria and the specifics in terms of size and d-cor; 2) Construction of the electr. height adjustable desks in the respective service 3) Dismantling of the old furniture; 4) Disposal of the old furniture (any reuse of the same is at the discretion of the contractor); 5) Dismantling the IT equipment of the old furniture and reconstruction on the delivered "new" electr Height-adjustable desks; 6) Final functional test of the individual electric height-adjustabledesks (desk function, possibility of height adjustment including wired IT equipment, etc.) 7) If necessary. if called by the public customer delivery and installation of the PC (CPU) mounts to the built-up electr. height-adjustable desks as part of their delivery. 2) A-criteria (table texture) The to be made and to runOn electrically height-adjustable desks, it is imperative that they comply with the following A-criteria (specifications): A criteria (performance criteria) of the electr to be supplied. height-adjustable desks Performance requirements Specification by the contracting authority Mass Per required performance item 2 000 x 800 mm, 1 800 x 800 mm, 1 600 x 800 mm. Frame Material: metal, decor: like RAL 9006 (white aluminum) or equivalent, other: possibility to compensate for unevenness in the floor (for example: floor leveling feet) plate quality, min. 25 mm, max. 35 mm thickness, melamine resin coated chipboard edge quality, min. 2 mm, max. 5 mm thick, rounded, Material: acrylonitrile butadiene styrene (ABS). Decor: top & edge Je gerequired object of performance maple, light gray, beech plate and edge each in the same decor Electric drive, drive for height adjustment: electric, control with display to indicate the height (standby when not in use) and error messages or codes; on the left or right side of the table facing the user; at least 3 storage spaces for different heightsHeight adjustable, stepless, min. 650 to 1 300 mm. Safety features during the electric height adjustment collision protection, crush protection, automatic position change in the opposite direction by defined distance at collision or crushing load proof proof eg by test report, Certification or equivalent, static: at least 120 kg, dynamic, d. H. during the electrical height adjustment: at least 80 kg of cable management, cable duct or trough under the long side of the table facing away from the user; at least 8 cm wide; open to the user, 2 cable openings or holes left and right on the side facing away from the user PC mount (CPU mount), must be optional as an accessory to theTables are possible as well as available, Partly the tables are to be delivered at the individual calls including these holders, s. Volume overview in this contract, Design as "frame", no solution by means of (tension) straps, load capacity min .: 15 KG. Instructions A manual is included, from which at least the following aspects emerge: load capacities (static, dynamic), Description of the error codes displayed. Alternatively, these aspects can also be found in the required data sheet (see the corresponding reference in the list of references Annex A2). As proof of authorization and permission to take part in the profession acc. -- 122 II No. 1 GWB, 44 VgV: (1) Declaration on entry in the professional or commercial register and communication of the commercial register number n(a) declarations of affiliation to the trade association; (3) declaration of business registration, permit; (4) where available, declarations of registration in the register of associations; (5) if available, declaration on the registration in the partnership register. as proof of economic and financial capacity acc. -- 122 II No. 2 GWB, 45 VgV: (1) statement on the existence of a valid public liability insurance with indication of the insurer, the insurance number, the insured risks, the sum insured and the insured period, (2) declaring that the company or parts of this niinsolvency or liquidation or no application for insolvency proceedings has been rejected for lack of assets and for the past 3 years no liquidation proceedings have been requested or opened for the company or parts thereof; (3) statement on the safety of the tax office, on the payment of taxes and duties, (4) statement on thePayment of contributions to the statutory health insurances, where most of the employees are insured. Internet address (URL): https://www.thueringen.de/th4/olg/index.aspx
The bid deadline for Contract notice: Desks was 20 Jan 2020. Bidding is closed.
This tender has been issued by THÜRINGER OBERLANDESGERICHT, GEMEINSAME VERWALTUNGSABTEILUNG, SACHGEBIET HAUSHALT UND BESCHAFFUNG in Germany.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 39121100 - Desks.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38395074. The purchaser document reference is 563764-2019.