Expired Tender Somalia ICB TOT Ref. 48023948

Consultancy WaterCad and AutoCad Software Capacity Tender - 48023948

Tender notice from Somalia, published on 01 Dec 2020.

Executive Summary

The SAVE THE CHILDREN INTERNATIONAL (SCI) has issued a Tender notice for the procurement of a Consultancy WaterCad and AutoCad Software Capacity Building Course - Garowe, Puntland in the Somalia. This Tender notice was published on 01 Dec 2020 and is scheduled to close on 06 Dec 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 48023948, while the tender notice number is and Register on the platform.

Key facts

Summary
Consultancy WaterCad and AutoCad Software Capacity Building Course - Garowe, Puntland
TOT Ref. No.
48023948
Document Ref. No.
Country
Somalia
Notice type
Tender
Competition
ICB
Publication date
01 Dec 2020
Bid deadline
06 Dec 2020
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Other Funding Agencies

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Consultancy Watercad and Autocad Software Capacity Building Course - Garowe, Puntland, Somalia.
Invitation to Bid for consultancy WaterCad and AutoCad software CAPACITY BUILDING COURSE - Garowe, Puntland, Somalia

 Job Description

INVITATION TO BID FOR CONSULTANCY

Save the Children International (SCI) Somalia program hereby invites interested consultants to bid for the consultancy assignment detailed below

1 Title of Consultancy Invitation to Bid for consultancy WaterCad and AutoCad software CAPACITY BUILDING COURSE

2 SCI Contracting Office Save the Children,  GAROWE

3 Period of Consultancy 7 DAYS; STARTING FROM 30TH - 6TH DEC 2020

4 Consultant type required BOTH INDIVIDUAL AND FIRM CAN APPLY FOR THE CONSULTANCY

5 Responsibility for Logistics arrangements and Costs THE CONSULTANT WILL CATER FOR ALL LOGISTICAL ARRANGEMENTS BY HIM/HER SELF

6 Taxation Provisions Consultant shall be responsible for all Taxes arising from the consultancy in line with the local Tax regulations applicable at the SCI contracting office named above

7 Travel requirements The consultant should be able to report to the duty station (Garowe -PL) to conduct a trainig for SCI WASH technical staff

8 Security requirements Consultant will comply with standard Save the Children Security procedures, including the completion of SCI online security training prior to travel to Somalia

9 Qualification and Experience The measurable qualifications and experience required:

o    Advanced degree in Water Resource Engineering, Civil Engineering and related fields with more 10 years of progressive experience

o    Extensive knowledge and solid professional experience in designing water supply projects and other civil structures through WaterCad and AutoCad software.

o    Experience in designing and providing training in WaterCad and AutoCad to project and technical staff.

10 Evaluation Criteria Indicate the criteria for evaluation

o    Advanced degree in Water Resource Engineering, Civil Engineering and related fields with more 10 years of progressive experience

o    Extensive knowledge and solid professional experience in designing water supply projects and other civil structures through WaterCad and AutoCad software.

o    Experience in designing and providing training in WaterCad and AutoCad to project and technical staff.

11 Application Procedure Interested consultants should submit their applications via email to [[email protected] ]

The applications should be submitted in PDF format as one document comprising Technical and Financial sections as detailed below.

a)      Technical proposal - including but not limited to :

·       Consultants understanding of the assignment and context

·       Approach to the assignment

·       Methodology

·       Tools

·       Deliverables

·       Workplan

·       Key staff biodata

b)     Financial proposal - providing a breakdown of all charges related to the assignment.

Applicants should also indicate the date they are available to start working on the consultancy

All applications MUST be submitted on or before the closing date below to be considered for the assignment.

12 Closing date for Applications Interested consultants shall submit their applications through the email address provided above on or before 6th December 2020.

Shortlisted candidates will be requested for an interview.

13 Terms of Reference (ToR) Complete ToR with details appended below attached herewith as    Annex 1.

o    Purpose of the consultancy,

o    Introduction of the project,

o    Background of the consultancy,

o    Objectives of the consultancy,

o    Proposed methodology and approach,

o    Scope of work,

o    Key deliverables / outputs

o    Activity timelines

ANNEX 1 : Consultancy Terms of Reference

Insert Terms of Reference

Document in Invitation to bid for consultancy
Terms of Reference

Area of Interest: WaterCad and AutoCad software CAPACITY BUILDING COURSE

Location: PUNTLAND

Position Type: Consultant/Firm

Duration: 10 DAYS for training.

Start date: 15TH November 2020

Introduction

Recurrent drought, inter-clan conflicts, and lack of funding for the WASH sector has led to a deterioration in water, sanitation and hygiene conditions throughout the drought-affected target districts, particularly among conflict-displaced IDPs. According to the Somalia WASH Cluster Humanitarian Dashboard (February 22, 2019), several regions of Somaliland and Puntland are experiencing severe water shortages due to the over-exploitation of already-limited resources and the breakages of equipment. This has resulted in children and women having to travel long distances in search of water, increasing protection risks. Inadequate access to safe water and sanitation services compounds vulnerabilities for specific groups such as the disabled, elderly, and school age children. There are also indirect effects, such as the loss of livestock. The construction and restoration of water points is therefore needed.

The provision of immediate life-saving and sustainable solutions of safe water and appropriate sanitation approaches will contribute greatly to the reduction of morbidity/mortality and an improved sense of dignity, comfort, and security. In light of the severity and magnitude of this situation in Somalia, Save the Children has increased its WASH response significantly. Currently we are implementing Emergency and long term WASH projects in different areas of the country supported by different funding agencies. The ongoing and planned WASH activities under the thematic area of WASH requires all rounded support of both soft and hard components of WASH. In order to fill the technical capacity gap of staff in supporting the existing program and any future interventions, technical training on the design & study of safe water supply and sanitation infrastructure via AutoCad and WaterCad software is a key. This is part of staff annual learning and development goal.

Overall objective

The overall objective of Computer aided design software training is to enable SC staff with varying skillsets to systematically plan, implement and monitor emergency and long-term WASH activities, therefore AutoCAD and Water Cad software training which are important for designing WASH infrastructure will be delivered. AutoCAD and WaterCad software is a ten-day training that prepares WASH Engineers to better design, plan and implement WASH projects in the country. This is a highly participatory course, with group exercises and theory based sessions, provides an example of WASH projects, identifying key issue and key technical skills.

Specific Objectives

The technical training will have the following specific objectives:-

 To train 10 save the children WASH engineer on study and design of safe water supply projects through computer aided Software (Water Cad);

 To train 10 save the children WASH engineer on the application of AutoCad Software to WASH infrastructure including practical exercise
Training Methodology

The training will be conducted by experienced consultants. It comprises full project design by providing raw data, to be collected from field (or considering some of secondary data from existing projects). The trainees will be provided with mini projects to design by themselves. The techniques that will be applied are:-

 Lectures;

 Explanatory examples;

 Mini projects;

 Software (WaterCAD, AutoCad);

 Training manuals for later on for reference;

Expected outputs

 Capacitated trainees who are good in design and analysis on Water supply and sanitation facilities

 Exemplary projects on water supply and sanitation facilities

Types of Trainings in detail

A. Training on Safe Water Supply System

I. Demand Supply Analysis

 Potential yield of the source- spring and deep well

 Population forecasting and design period

 Demand calculation considering forecasted population and design period.

II. Infrastructure Design

Hydraulic Design of:-

 Collection Chamber

 Service reservoir

 Pressure main

 Distribution System

III. Software Training

 WaterCAD and AutoCad software latest version

 Application of the software

IV. Design of Electromechanical Equipment-s

 Analysis of pump power requirement

 Analysis of Diesel generator power requirement

V. Full design of Safe Water Supply project via Water Cad software (From source to Water Point); Mini project applying all of the above.

VI. Full hand out of the training and the Water CAD software.
B. Training on practical application of AutoCad software
Full hand out of the training and AutoCAD software, full design of Safe Water Supply, sanitation and other civil structure; Mini project applying all of the above.
VII. Required skills:

Save the Children seeks to invite qualified consultants/firms who meet the following requirements to submit their detailed narrative and financial proposal on how to undertake the assignment.
 Advanced degree in Water Resource Engineering, Civil Engineering and related fields with more 10 years of progressive experience

 Extensive knowledge and solid professional experience in designing water supply projects and other civil structures through WaterCad and AutoCad software.

 Experience in designing and providing training in WaterCad and AutoCad to project and technical staff.

 The consultant should prepares training and reference manuals, Prepares all kinds of data collection and training formats, Leads relevant data collection from field; Conducts class lectures and practical trainings, according to but not limited to all listed in the methodology part; Prepares & submits training report of not more than 20 pages with ten days from th

Documents

Tender Notice
Login to view

Similar tenders

Somalia Public Procurement Intelligence

Frequently asked questions

The bid deadline for Consultancy WaterCad and AutoCad Software Capacity Building Course - Garowe, Puntland was 06 Dec 2020. Bidding is closed.

This tender has been issued by SAVE THE CHILDREN INTERNATIONAL (SCI) in Somalia.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender is classified under the following CPV code(s): 72266000 - Software consultancy services.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 48023948. The purchaser document reference is not provided in the notice.

See the Similar Tenders section on this page or browse other tenders from Somalia.

This tender falls under Computer Hardware and Software Services in Somalia. Suppliers in these sectors can track similar Somalia tenders using CPV-based alerts.