Expired Tender South Africa ICB TOT Ref. 74465214

Alterations to Laboratory Tender in South Africa - 74465214

Tender notice from South Africa, published on 12 Nov 2022.

Executive Summary

The NATIONAL HEALTH LABORATORY SERVICE has issued a Tender notice for the procurement of a Alterations to Laboratory in the South Africa. This Tender notice was published on 12 Nov 2022 and is scheduled to close on 21 Nov 2022, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 74465214, while the tender notice number is RENO 2022 - 030 and Register on the platform.

Key facts

Summary
Alterations to Laboratory
TOT Ref. No.
74465214
Document Ref. No.
RENO 2022 - 030
Country
South Africa
Notice type
Tender
Competition
ICB
Publication date
12 Nov 2022
Bid deadline
21 Nov 2022
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Self Financed

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Alterations to Laboratory at NHLS Yusuf Dadoo in Krugersdorp.
1 Removal of existing work

1.1

Safely disconnect electrical work, remove the existing

wooden receiving counter, vinly sheeting, benches and

cart away

item 1

Bill No.2

2 Aluminium work

2.1

Supply and fit new wooden counter 2100mm wide

complete with the existing aluminum counter to a new

position item 1

2.2

Supply and fit new 850mm widex950mm high natural

aluminium shopfront to the lab counter with shutter proof

glasses and 400mm widex250mm lockable sliding

counter door the counter must be 6mm shutter proof

glass, the aluminium must be fitted on the counter to the

as per specification

no 1

2.3 Supply and fit 75mm high aluminium skirting to new dry

wall m 2.6

2.4

Remove the existing wooden door and frame, Supply and

fit 910mm widex2080mm high aluminium single door

complete aluminium frame. The door must have mid-rail

all shutter proof glasses must be frosted 6mm glass, top

hinges must be double hinges, door handle must be

dortello T pull, ozone H type or C type only, and door

closer, lock and keys, the aluminium profile must be

90mm all around as per specification to room 123

no 1

2.5

Supply and fit 1200mm widex2080mm high aluminium

double door complete with 2000mmwidex3300mm high

aluminium frame. The door must have mid-rail bottom

part must be frosted 6mm glass, top hinges must be

double hinges, door handle must be dortello T pull, ozone

H type or C type only, and door closer, lock and keys, the

aluminium profile must be 90mm all around as per

specification
3 Laboratory furniture

Room 142

3.1

Supply and fit steel powder coated shelving, 900mm wide

x 2200mm high x 450mm deep, shelves must be 500mm

apart

no 5

3.2 Remove the existing basin and close off the water supply

and drain

no 1

3.3 Supply and install 16mmx1000mmx500mm oak flappable

solid wood complete with hinges as per specification

no 1

3.4 Supply and install 16mmx200mmx1000mm oak solid wood

complete with brackets as per specification m 4

Bill No 4

4 Electrical work

4.1

Supply and fit 15 amp standard power pole with network

and 6 plug points, wire from distribution board to prevent

overloading including circuit breakers and wiring as per

specification

no 1

4.2 Supply and fit 2 Compartment double type steel powder

coated power skirting, allow for bends and end caps as

per specification to different rooms

m 40

4.3

Supply and fit 15 amp standard steel powder coated

power skirting plug points, wire from distribution board to

prevent overloading including circuit breakers and wiring

as per specification to different rooms

no 30

4.4

Supply and fit 15 amp dedicated steel powder coated

power skirting plug points, wire from distribution board to

prevent overloading including circuit breakers and wiring

as per specification to different rooms

no 10

4.5 Removal of old autoclave and cart away and make good

to waste room

no 1

4.6

Remove the existing sneeze system, Supply and fit new

Ceramic toilet including cistern, toilet seat, connect to

existing water and drain to waste room

no 1

Bill No 5

5 Kitchen wood work and ironmongery

5.1 Remove the existing kitchen cupboards, sink and cart

away

item 1

5.2

Remove the existing vinyl tiles and cart away, Prepare

floor to rough Supply and fit 600mmx600mmx10mm ceramic

“A grade” floor tiles using tile cement and light grey

grouting

m2 15

5.3 Prepare floor to rough Supply and fit 600mmx200mmx10mm

ceramic “A grade” tiles skirting using tile cement and light

grey grouting and capping

m 15

5.4 Supply and fit new melamine under bench cupboards,

900mm wide x750mm with doors, hinges and handles colour

to be discussed on appointment

no 3

5.5 Supply and fit new melamine under bench cupboards,

450mm wide x698mm with drawers and handles colour to

be discussed on appointment

no 1

5.6

Supply and fit new melamine wall cupboards, 750mm wide

x 698mm with doors, hinges and handles colour to be

discussed on appointment

no 3

5.7 Supply and fit new melamine microwave holder cupboard

to accommodate 42L microwave no 1

5.8 Supply and fit 16 mmx600mm wide kitchen granite top to the

kitchen area m 2

5.9

Supply and fit 1160mm x 500mm drop-in stainless steel

double bowl sink, connect to water supply and drainage,

supply and fit cobra swivel sink mixer, with a splash back

tiles above the top

no 1

5.10 Supply and fit steel powder coated shelving, 900mm wide

x 2200mm high x 450mm deep, shelves must be 500mm

apart to room 142

no 5

5.11 Remove the existing basin and close off the water supply

and drain to room 142

no 1

5.12 Supply and install 16mmx1000mmx500mm oak flappable

solid wood complete with hinges as per specification to

room 142

no 1

5.13 Supply and install 16mmx200mmx1000mm oak solid wood

complete with brackets as per specification to room 142

m 4

5.14

Manufacture, supply and fit wooden lockers using oak

melamine wood for exterior and white for interior 500mm

wide x500mm high x 400mm deep(inside measurements)

complete with white backing to change room

no 14

RFQ: RENO 2022 - 030: ALTERATIONS TO LABORATORY

AT NHLS YUSUF DADOO IN KRUGERSDORP

13

5.15 Supply and fit new one sided hinge brackets complete

with 6mm bolt and nuts with to accommodate 5mm padlocks

two each locker, bolted to the wooden lockers to lockers

no 28

5.16

Supply and fit 1800mm high x 900mm wide with 5 raw of

400mm high apart x450mm deep with 2x450mmx1800mm

hinged doors melamine filing cabinet and lock set colour

to be confirmed upon appointment to manager office

no 1

Bill No 6

6 water heaters

6.1

Supply and install 10L Hydro boil, install above sink,

includes all connection to water supply and wired to the

isolator.

no 1

6.2

Supply and install 10L prisma geyser, install under the

counter for kitchen, and connect to water supply and

wired to the new isolator complete with 15mm coper pipes

complete with all fitting from geyser to the sinks and

connect to water supply, allow for necessary length of

copper pipe

no 1

6.3 Supply and fit 30 Amp D/P isolator at each air con, fed

from distribution board with curve 1- 25amp single pole

circuit breakers. Allow for cabling

no 2

Bill No 7

7 Dry wall and fittings

Toilet ladies and gents

7.1 Supply and install soundproof dry wall partition. Height

2800mm m 4

7.2 Supply and install 2100mm high aluminum frame with

wooden doors and lock set as per specification

no 2

Bill No 8

8 Tilling

8.1

Remove the existing tiles, Supply and fit

600mmx600mmx10mm ceramic “A grade” floor tiles using tile

cement and light grey grouting

On floor m2 9

8.2

Remove the existing wall tiles and cart away, Prepare wall

to rough finish, supply and fit 200mmx600mmx10mm ceramic

“A grade” wall tiles to door height using tile cement and

white grouting including boarder tile

RFQ: RENO 2022 - 030: ALTERATIONS TO LABORATORY

AT NHLS YUSUF DADOO IN KRUGERSDORP

14

On wall m2 22

Bill No 9

9 Sanitary fittings

9.1

Remove the existing basin, supply and fit porcelain hand

wash basin on pedestal with cobra swivel taps connect to

cold and hot water supply and waste, fit splash back tiles

above basin, fit shut off valve to each water outlet as per

specification to toilet

no 1

9.2

Remove the existing basin, supply and fit porcelain hand

wash basin on pedestal with elbow/medical taps connect

to cold and hot water supply and waste, fit splash back

tiles above basin, fit shut off valve to each water outlet as

per specification to receiving area

no 1

9.3

Remove the existing toilets, cistern, and cart away

, Supply and fit new Ceramic toilet including cistern, toilet

paper holder, toilet seat, connect to existing water and

drain

no 2

9.4 Remove the existing emergency shower from corridor

and fit elsewhere and allow for piping no 1

Bill No 10

10 Painting

On previously painted

10.1

Prepare and paint walls with plascon Velvaglo or similar

white 2 coats as per specifications to different rooms and

passage area

Internal walls m2 226

10.2

Prepare and paint ceiling with plascon polvin or similar

white 2 coats as per specifications to different rooms and

passage area

on celling m2 66

Bill No 11

11 Laboratory furniture

11.1

Supply and deliver steel powder coated powder coated

under bench cupboards 800mm high x 1000mm

widex500mm deep with doors and shelves, All doors to be

double panelled for stability on castes as per

specification

no 4

RFQ: RENO 2022 - 030: ALTERATIONS TO LABORATORY

AT NHLS YUSUF DADOO IN KRUGERSDORP

15

11.2

Supply and deliver steel powder coated powder coated

under bench cupboards 800mm high x 500mm wide x500mm

deep with doors and shelves on castes as per

specification

no 4

11.3

Supply and install steel powder coated square tubing

frames 32mmx1100mm wide x 850mm on standing height

as per specification to different rooms

m 25

11.4 Supply and install 32mmx900mm wide long Formica top as

per specification to different rooms m 25

12 compliance

12.1 Supply Electrical certificate of compliance on completion

(COC) item 1

13 Contingency

13.1

Provide the sum of R 20 000.00 (twenty Rand) for

contingencies and design contingency, to be used as

instructed by the project manager in terms of clause 17 of

the Principal Building Agreement. shall be expended at

the sole discretion of the Client. and deducted in whole or

in part if not required

item
Closing Date and Time: 21 November 2022 @11h00

Documents

Tender Notice
Login to view

South Africa Public Procurement Intelligence

Frequently asked questions

The bid deadline for Alterations to Laboratory was 21 Nov 2022. Bidding is closed.

This tender has been issued by NATIONAL HEALTH LABORATORY SERVICE in South Africa.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 74465214. The purchaser document reference is RENO 2022 - 030.

Browse other tenders from South Africa or search by relevant keywords and CPV classification.