Expired Tender Tunisia ICB TOT Ref. 61819996

Acquire Scientific Materials for the Benefit Tender - 61819996

Tender notice from Tunisia, published on 03 Jan 2022.

Executive Summary

The THE UNIVERSITY OF JENDOUBA has issued a Tender notice for the procurement of a Acquire Scientific Materials for the Benefit of the Higher Institute of Biotechnology of BéJa in the Tunisia. This Tender notice was published on 03 Jan 2022 and is scheduled to close on 17 Jan 2022, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 61819996, while the tender notice number is 39/2021 and Register on the platform.

Key facts

Summary
Acquire Scientific Materials for the Benefit of the Higher Institute of Biotechnology of BéJa
TOT Ref. No.
61819996
Document Ref. No.
39/2021
Country
Tunisia
Notice type
Tender
Competition
ICB
Publication date
03 Jan 2022
Bid deadline
17 Jan 2022
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
European Union (EU)

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Acquire Scientific Materials for the Benefit of the Higher Institute of Biotechnology of BéJa within the Framework of the Erasmus + Project (Biotechtunisia).

01 - Refrigerated Bench-Top Centrifuge - Qty 01

02 - Double Beam Uv-Visible Spectrophotometer - Qty 01

03 - Ultrasonic Homogenizer with Accessories - Qty 01
Refrigerated bench-top centrifuge:

Minimum characteristics required:

Capacity: 4 x 1000 ml minimum

• Minimum number of 50 ml tubes: 40

• Minimum number of 15 ml tubes: 96

• Maximum speed: 4000 rpm at minimum

• Acceleration gradient: 6 to minimum

• Deceleration slope: 10

• Temperature Range (° C): Variable from -10 ° C to -40 ° C

• Pre-cooling function: direct button control

• Refrigeration circuit: Without CFC

• Time range: 9:59 am; continued

• Noise: 57dba

• standards: iec 61010-1, iec 61010-2-020, 230 v only: en 61326

• certifications: ul compliant, ce mark, biological safety certified, rohs compliant, weee

compliant

• drive system: motor direct induction without carbon brushes

• unbalance detection system: continuous vibration measurement, with correction of the mass of

the rotor

• reading: a large screen with backlit display delivered with :

• two rotors:

4 x oscillating bucket rotor 1000 ml, clickseal lid (one containment cover biological), four

adapters for 40 conical tubes of 50 ml, four adapters for 96 tubes 15 ml conicals, four adapter for

500 ml bottle, four adapters for 8 tubes 250 ml an angular aluminum rotor : capacity 30 x 2 ml,

speed 15200 rpm, angle 45 °

• bottles:

four polypropylene bottles from 1000 ml 3 x bag of 25 conical tube 50 ml 2 x bag of 50 conical

tube 15 ml 5 x bag of tubes 2 ml (500 rooms)

• system of change of the two auto-lock rapid rotors, single push of a button

• guarantee: at least 2 years for the device and five years for the rotor training a training of at

least one day in the premises of the user, when switching on and proper operation of the machine

is obligatory.

• the original technical documentation (prospectus and brochures) relating to the proposed offer is

mandatory.

dual-beam uv-visible spectrophotometer:

minimum characteristics required:

• double beam spectrophotometer with very stable optics

• integrated user interface

• meets the requirements of european pharmacopoeia

• measurement modes: photometry, concentration, wavelengths multiples, spectrum scanning,

kinetics, quantification, dna / rna and protein analysis.

• wavelength range: 190 to 1100 nm

• wavelength resolution: 0.1 nm

• wavelength precision: ± 0.3 nm (at 0.5 and 1 nm bandwidth); ± 0.5 nm (at 2, 4 and 5 nm band

passerby)

• wavelength reproducibility : ± 0.2 nm

• spectral bandwidth: variable 0.5, 1, 2, 4, 5 nm

• photometric range: - 0.3 to 3.0a 0 to 200% t

• photometric accuracy: ± 0.002a (0- 0.5a); ± 0.3% t (0-100% t)

• photometric reproducibility: ± 0.001 abs (0 to 0.5 abs); ± 0.002 abs (0.5 to 1.0 abs); 0.15% t

(0- 100% t)

• resolution: 0.1% t, 0.001a • stray light: 0.05% t at 220 and 360 nm

• noise: 0.0005a

• stability: ± 0.001 a / h at 500 nm after 15 min of preheating

• multi-wavelength: up to 10 wavelengths, up to 20 lengths waveform with pc software

• calculations: ratio, difference, formulas with factors • analysis interval: 0.1, 0.2, 0.5, 1, 2 or 5

nm

• an analysis: peaks and valleys automatic, zoom, addition, subtraction, peak ratios, smoothing,

wavelength table, derivatives, overlay with pc software

• kinetics: up to 12 hours with time intervals of 0.1, 0.2, 0.5, 1, 2, 5, 10 or 30 seconds

• quantization points: up to 3 wavelengths

• quantization calibration: blank with up to 10 standards or factor

• concentration range: 0- 99999

• calibration: white with standards or postman

• dna rna and protein: ratio dna / rna, concentration, correction a320

• light source: tungsten lamps halogen and deuterium

• lamp change: table of selection from 325 to 370 nm

• outputs: usb

• operating system: windows 2000, xp, vista, windows 7

• pc software included as standard delivered with :

• a single 10 x10 cuvette holder mm in sample and reference position

• instruction manual

• power cables

• pc software on cd-rom with cable usb and nail connection

• 4 gb usb stick

• 2 x quartz cuvettes, 4 x quartz cuvettes glass and dust cover, 230v power supply

• guarantee: 1 year minimum training a training of at least one day at the user's premises, is the start-up and the good machine operation is obligatory

• the original technical documentation (prospectus and brochures) relating to the proposed offer is mandatory ultrasonic homogenizer with accessories:

minimum characteristics required:

• treated volume: 0.5 - 500 ml

• power: 500 watts to minimum

• programmable: from 1 second to 10 hours

• overload protection

• pulse mode: from 1 second to 59 seconds

• energy display on screen: in watts and joules

• operating frequency: 20 khz

• dimensions (generator): 203 x 387 x 216 mm (l x w x h)

• lcd display with display the following parameters: selected amplitude output power delivered to the probe in watts and in the form of percentage of total power duration of the treatment selected actual processing time time elapsed adjustment and display of temperature pulse duration energy accumulated in joules delivered to the probe

• key from 0 to 9 to enter the figures

• includes: a generator, a converter, one 13 mm probe (1/2 ”) for the treatment of samples with

volumes of 10 to 250 ml, cables, wrench set, manual comes with accessories:

• micro-tip probe: diameter the 3 mm (1/8 ") bit for the treatment of volumes ranging from 0.5 to

15 ml

• micro-tip probe: diameter 6 mm (1/4 ") bit for the treatment of volumes ranging from 5 to 50 ml

• probe: diameter of the tip 19 mm (1/4 ”) for processing volumes ranging from 25 to 500 ml

• soundproof enclosure: external dimension: 343 x 775 x 330 mm (lxwxh), includes a rod

support and mounting system of the internal converter

• guarantee: 2 years minimum training a training of at least one day at the user's premises, when

switching on and the correct machine operation is obligatory.
the deadline for receipt of tenders is set for 01/17/2022 at 10 a.m. on this date, the online procedure will be closed and no offer can be accepted.
[disclaimer: the above text is machine translated. for accurate information kindly refer the original document.]

Documents

Tender Notice
Login to view

Tunisia Public Procurement Intelligence

Frequently asked questions

The bid deadline for Acquire Scientific Materials for the Benefit of the Higher Institute of Biotechnology of BéJa was 17 Jan 2022. Bidding is closed.

This tender has been issued by THE UNIVERSITY OF JENDOUBA in Tunisia.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by European Union (EU).

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 61819996. The purchaser document reference is 39/2021.

Browse other tenders from Tunisia or search by relevant keywords and CPV classification.