1. Office Chair: Swivel with Adjustable Arms Tender - 145668475

Procurement Summary

Country: Brazil

Summary: 1. Office Chair: Swivel with Adjustable Arms, According to Abnt Nbr 13962, With, at Minimum, High Backrest. Minimum Adjustments for Independent Movements for Seat Height, Wheel Casters....

Deadline: 27 Jul 2026

Posting Date: 22 Jul 2026

Other Information

Notice Type: Tender

TOT Ref.No.: 145668475

Document Ref. No.: 2026/26391

Competition: ICB

Financier: Self Financed

Purchaser Ownership: Public

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

1. Office Chair: Swivel With Adjustable Arms, According to Abnt Nbr 13962, With, At Minimum, High Backrest. Minimum Adjustments For Independent Movements For Seat Height, Wheel Casters... 1. Office Chair: Swivel With Arms Adjustable, According to Abnt Nbr 13962, With, At Minimum, High Backrest. Minimum Adjustments for Independent Movements for Seat Height, Dual Swivel Casters, 360 Degree Seat/Back Swivel, Armrest Height, Backrest Height, Tilt Backrest. Backrest: Structured in an injected polypropylene chassis with structural reinforcement fins, upholstery in molded injected flexible polyurethane foam with a predominant average thickness of at least 35 mm and equipped with a fairing for the back cover of the Backrest Injected In Polypropylene That Leaves The Attachment Points Of The Backrest Extender On The Backrest Chassis Inaccessible And Does Not Be Shown And That Covers The Same Extender, Not Leaving It Apparent During The Vertical Adjustment Operational Course. Minimum Width Backrest of 480 mm, minimum backrest vertical extension of 550 mm, backrest height adjustment of at least 5 points, with minimum vertical adjustment travel of 70 mm. Seat: Structured in Injected Polypropylene Chassis With Structural Reinforcement Fins Or Anatomical Multilaminated Plywood with a minimum thickness of 12 mm, upholstery in flexible injected polyurethane foam molded with 40 mm of predominant average thickness with back cover for the seat injected in polypropylene that protects the entire counter seat And Maples. Attachment of the elements to the seat chassis using screws and claw nuts with metric thread. Seat and back covering in crepe fabric, polyester, or synthetic laminate spread over mesh in color to be defined. Width E Minimum surface depth of 460 mm. Mechanism: Permanent Contact Type Operating Mechanism That Allows, At A Minimum, Seat Height Adjustment, Backrest Height Adjustment And Adjustment Of...
Type of Acquisition: General Furniture Nature of Acquisition: Permanent Equipment and Material Purchasing Manager: TARSO PINHEIRO BORGES Notice No.: 20260012 Date/Time: 07/27/2026 09:00

Documents

 Tender Notice