Vertical-spindle machining centre Tender in Poland - 7468487
Tender notice from Poland, published on 26 Jul 2016.
Exeutive Summary
The PrzedsiAe has issued a Tender notice for the procurement of a Vertical-spindle machining centre in the Poland. This Tender notice was published on 26 Jul 2016 and is scheduled to close on 05 Sep 2016, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 7468487, while the tender notice number is 257347-2016 and Register on the platform.
Purchase installation and commissioning of specialized devices and configure them in a production line used to manufacture machines for molding of plastic parts, including deep center EDM, wire EDM center of travels 350x250x250, wire EDM center of travels 600x400x350, a three-center obrobkotion, five-axis machining center, laser marking systems and mounting 3R, for the project entitled .: Implementation of the results of research and development for the production of machines for processing of plastics COMPANY WIELOBRANŻOWE MAJAK in the framework of the project financing agreement No. POPW.01.03.01-28 -0004 / 15-00.1) Flush center EDM: Maszyna aims to enable drill parts with high efficiency and precision processing. The machine should have a big package, modular supporting EDM, such as the module "zero electrode wear." It is designed to eliminate virtually zero electrode wear, and thus perfectly reproduce the shape, and at the same time reduce the cost of productionand electrodes. The device should be characterized by ease of use and programming that zapewniautomatyczne control. Electro CNC machine, controlled by microprocessors, is to allow the automatic profiling from roughing to finishing with the automatic selection of a sequence of elementary settings generator parts programs and operations of therelated. The center is composed of three basic elements integrated on a common basis: the machine, the generator control unit CNC module with dielectric system filtrującym.Parametry facilities: Line [mm]: X: 330 min, Y: min 220, Z: 250 min speed C-axis min 100 r / min: warehouse electrodes min 4 positions: probe: cycles orbiting with contringu cycle: The possibility of simultaneous processing of 4-axis .: Preparation for the fire protection system (UV detector): Maximum electrode weight 50 kg: Minimum surface roughness of 0.1 um: Rulers Optical Drives axes of linear ball screws: Chłodziarka2) wire EDM center of travels 350x250x250: Cutting wire should LACgrowin in a top speed of material removal using the generator functions for reducing hourly operating costs and zdoskonałym, intuitive user interface. Machine control is to be based on Windows XP and provide high performance and comfort thanks to the large screen, the color and transparent parties to preparei?1/2and programming cuts. The generator should provide the best quality of discharges in the spark gap allowing to achieve a better geometry of the object, and better surface quality. The automatic wire threading should be reliable and not require frequent inspection and adjustment. It should significantly reduce operating costs and increase throughputi?1/2machinery. A machine with diamond, closed prowadnikamidrutu 0.25mm. Multi-function remote control manual should make it possible to carry out the work actuators, axis movements, boot / cycle arrest and have a safety switch. X and Y axes should have podwojny reading position (linear scales and encoders) to provide improved positioning accuracy and shorteningand the reaction time systemu.Parametry and equipment: Minimum fares 350x250x250 Generator antyelektrolizyjny: Optical Rulers: Diamond Ring guides: CAD / CAM machine control: Anti-collision system X, Y, Z (software and hardware) that does not require replacement parts after collision .: automatic threading: Minimum final roughness0.2 Ra: Refrigerator: drives in the axes of linear ball screws: the central lubrication system axis .: Ports data exchange standard, LAN, USB color screen with a diagonal of 17 inches minimum: Cutting accuracy UM3 5) Wire EDM center of travels 600x400x350 : Cutting wire should combine the highest rate of material removal by means of the generatorra with functions for lowering the hourly operating costs and zdoskonałym, intuitive user interface. Machine control should be based on Windows XP and provide high performance and comfort thanks to the large screen kolorowemui clear to the parties to prepare and programming cuts. The generator should provide the best juality discharges in the spark gap allowing to achieve a better geometry of the object, and better surface quality. The automatic wire threading should be reliable and not require frequent inspection and adjustment. It should significantly reduce operating costs and increase the throughput of the machine. A machine with diamond, closed wire guides0.25mm. Multi-function remote control manual should make it possible to carry out the work actuators, axis movements, boot / cycle arrest and have a safety switch. X and Y axes should have podwojny reading position (linear scales and encoders) to provide improved positioning accuracy and response time systemu.Parametry and equipment: Minimum transitionveryone 600x340x340 Generator antyelektrolizyjny: Optical Rulers: Diamond Ring guides: CAD / CAM machine control: Anti-collision system X, Y, Z (software and hardware) that does not require replacement parts after a collision .: Automatic threading: Minimum final roughness 0.2 Ra: Refrigerator: drives in the axes of linear ball screws: Ukorder the central axis lubrication .: Ports data exchange standard, LAN, USB color screen with a diagonal of 17 inches minimum: Maximum workpiece weight 1000kg min: Cutting accuracy UM4 5) three-axle machining center: machining center built on the principle of cross-table. Two movements should be realizowanepoprzez displacement detail, one by movingtool. The dimensions of the sled, working table and the possible processing of the workpiece dimensions result from the rigid, heavily ribbed design the main body. The combination of design headstock and column should provide absorbed vibration and cutting forces combined with the behavior of fast and precise movements in the plane pionowej.Parametry and equipment required:control Heidenhain system bezpieczei?1/2 "State Functional Safety: Control must contain ‡: processing cycles and measuring cycles: Drive axis x minimum 780 mm Drive y-axis minimum 490 mm Drive axis With a minimum of 520 mm spindle least 10 000 rev / min, cone ISO40: torque on the spindle for S6 (40i) a minimum of 140 Nm: Power on the spindle for S6 (40i) at least 18 kW:Travels fast axes X, Y, Z at least 40 m / min: Probe workpiece and tool: chip conveyor: Gun coolant and air: Remote control: Cab machine completely closed: Automatic central lubrication system: Flashing light: Tool magazine minimum of 24 positions .: Load capacity of the machine table minimum of 1000 kg: feed force X, Y, Z at least 10 kN: Prep machineOtow for cooling the axis narzędzia.5) five-axis machining center -machine should combine high dynamics and rigidity, which can be used for profitable processing of workpieces made of aluminum or steel. Milling is designed to provide a broad processing capabilities from simple drilling to complex processing Pentalateral commonly used in the operating mode "32 "until the full simultaneous milling. Milling should be equipped wzaawansowane control, allowing the production of parts with high accuracy shape with high yield. Numerical control is to ensure fully automatic operation of milling machines and offer a wide range of capabilities to easily and efficiently prepare programu.Parametry and wyposażeniePrzejazdy: X-axis: min 500 mm, : Y-axis: min, : 430 mm Z axis: 400 mm min, : B axis minimum -60 / 100 0 C: 3600, : PROCESSING 3 2: Table diameter minimum: 0 500mm : required Heidenhain control system safety Functional safety or equivalent: spindle least 12 000 rev / min, cone ISO40: swivel rotary table (in the processing 3 axis fixed table) tool magazine minimum 30 items: Cooling through the spindle axis, a minimum of 20 bar: Calibration milling by the machine software (series auto calibration): Thermal compensation of the machine: Enclosed cab Working: Supporting table tilt: rotation from two sides: Rulers optical plus encoders: Probe tools, probe detail: chip conveyor: the maximum weight of the tool ismagazine location: 8 min kg6) Laser marking machine: laser marking machine designed to perform signs and internal engraving forms. Jejfunkcją has to be precise and very fast marking and engraving made in metals. The device should be highly efficient, economical and reliable użytkowaniu.Parametry and equipment: marking machine with a capacity of 18W min: appetizer rpmOtowa with tailstock: auto dining, working the X-axis: digital readout of height ci7) System wrestled "3R System wrestled" 3R the necessary ™ gout for precise handling of the workpiece international ™ between each device ... dzeniami, maintaining the same position relative ™ dem tool ™ machining tools. Accuracy i?1/2 ‡ mounting min 2 um.Dodatkowe requirements Employer ... dual: Place ordersia: 11-700 Mrągowo, ul. Industrial 1D.Termin implementation of the orders for the September 19, 2016 r.Gwarancja: min. 24 miesiące.Czas service response 48 hours. since zgłoszenia.Naprawa a maximum of 14 days from the date of the notification. Description: Vertical-spindle machining centre Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 42612200, 42632000, 42631000, 42674000
CPV Description: Vertical-spindle machining centre.  
Numerically-controlled machines for metal.  
Machine tools for finishing metals.  
Parts and accessories for metal-working machine tools.   Internet address (URL): www.pw-majak.com
The bid deadline for Vertical-spindle machining centre was 05 Sep 2016. Bidding is closed.
This tender has been issued by PrzedsiAe in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42612200 - Vertical-spindle machining centre, 42632000 - Numerically-controlled machines for metal, 42631000 - Machine tools for finishing metals, 42674000 - Parts and accessories for metal-working machine tools.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 7468487. The purchaser document reference is 257347-2016.