Expired Tender USA ICB TOT Ref. 7239861

Usammda Chemical Patient Protective Wrap (Cppw) Tender - 7239861

Tender notice from USA, published on 11 Jul 2016.

Executive Summary

The DEPARTMENT OF THE ARMY has issued a Tender notice for the procurement of a Usammda Chemical Patient Protective Wrap (Cppw) Kits in the USA. This Tender notice was published on 11 Jul 2016 and is scheduled to close on 08 Aug 2016, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 7239861, while the tender notice number is W81XWH-16-R-0059 and Register on the platform.

Key facts

Summary
Usammda Chemical Patient Protective Wrap (Cppw) Kits
TOT Ref. No.
7239861
Document Ref. No.
W81XWH-16-R-0059
Country
USA
Notice type
Tender
Competition
ICB
Publication date
11 Jul 2016
Bid deadline
08 Aug 2016
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Combined synopsis/solicitation instructions

1. Issue date: 8 july 2016 2. Close date: 8 august 2016 1:00 pm est

3. Contracting activity: u.s. Army medical research acquisition activity (usamraa) located at 820 chandler street, fort detrick, md 21702

4. Requiring activity: u.s. Army medical materiel development activity (usammda)
5. Subject: chemical patient protective wraps (cppw)
this is a combined synopsis/solicitation for commercial items prepared in accordance with far 12.6, streamlined procedures for commercial items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is w81xwh-16-r-0030. The solicitation is issued as a request for quotation (rfq). Provisions and clauses in effect through federal acquisition circular 2005-78 are incorporated. It is the contractor s responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses https://acquisition.gov/far/index.html and http://www.acq.osd.mil/dpap/sitemap.html. The naics code is 424690, other chemical and allied products merchant wholesalers. This is a full and open competition requirement; all qualified vendors are encouraged to submit a quote.

The us army medical research acquisition activity (usamraa) on behalf of the u.s. Army medical materiel development activity (usammda) has a requirement for chemical protective wrap (kits) in accordance with (iaw) the statement of need (son) and minimum essential characteristics (mecs).
Point-of-contract: the point-of-contact for this acquisition is mrs. Shylonda minter, contract specialist, [email protected]. No telephone calls will be accepted.
Item no supplies/services quantity unit unit price amount

0001 164

chemical patient protective wrap (kits)

ffp

chemical patient protective wrap (kits) iaw statment of need (son) and the minimum essential characteristics

fob: destination

purchase request number: 0010818218
net amt
item no supplies/services quantity unit unit price amount

0002 164

option chemical patient protective wrap (kits)

ffp

chemical patient protective wrap (kits) iaw statment of need (son) and the minimum essential characteristics

fob: destination
net amt
item no supplies/services quantity unit unit price amount

0003 164

option chemical patient protective wrap (kits)

ffp

chemical patient protective wrap (kits) iaw statment of need (son) and the minimum essential characteristics

fob: destination
net amt
son and mecs

statement of need (son)

chemical patient protective wrap (cppw)
1. Requirements.
The medical support systems, project management office (pmo-mss) of the u.s. Army medical materiel development activity (usammda) has a requirement to obtain a commercially available cppw. This statement of need shall facilitate purchase of the cppw to replenish stock. The proposed contract shall be firm fixed price consisting of one base clin and two separate option quantity clins for the base year.
2. Background.
The cppw is used to protect patients who are incapable of donning individual chemical protective over garments. The cppw will enable patients to be transported and treated safely during evacuation through chemically contaminated areas. It is used in forward areas on the battlefield such as battalion aid stations and medical companies. The cppw is also used with patients at combat support hospitals.
3. Period and place of delivery requirements
3.1. The proposed delivery date for the initial purchase of the chemical wraps is estimated at no later than 60 days after award. Earlier delivery is desired.
The period of performance for the option quantity clins is estimated at 06 july 2016 - 05 december 2016.
3.2. Place of delivery. The primary delivery location will be at the u.s. Army medical materiel agency stock maintenance division, c/o u.s. Army medical materiel development activity (usammda), bldg. 1160, 6149 wardleigh road bay 2, hill air force base, ut 84056-5948.
4. Minimum essential characteristics.
4.1. Protective characteristics.
4.1.1 the cppw shall be capable of providing respiration and percutaneous protection for unmasked, uncontaminated patients for a minimum of six hours after initial exposure to known potential chemical warfare agents that could be employed in vapor, aerosol, liquid, or thickened liquid form. The cppw fabric, at minimum, must demonstrate resistance to permeation (liquid challenge) for two chemical agents: soman (gd) and sulfur mustard (hd). Vendors must provide test reports or evidence of swatch testing of materials used in the fabrication of their candidate product. Aerosol vapor liquid assessment group (avlag) top 8-2-501 references standards for swatch testing of material. The test report must be provided from an independent lab or testing activity.
4.1.2 the upper surface of the cppw will be water repellent so that the protective characteristics will not be degraded by exposure to moisture such as mist, rain, snow or saltwater spray. The bottom surface/material of the cppw will be totally impervious to moisture, including liquid chemical agents.
4.1.3 the protective characteristics of the cppw shall not be degraded when body excreta such as blood, urine and feces are brought into contact with the interior surfaces of the wrap.
4.2. Physical characteristics.
4.2.1 the cppw shall be a disposable, expendable item of medical supply and weigh no more than nine pounds in its packaged configuration, excluding the blower system, such as the powered air purifying respirator (papr). The current papr system used for this purpose is the c420 blower and c2a1 filter canisters. Rechargeable batteries are required for use with the papr.
4.2.2 the cppw shall be designed and manufactured in one size. It shall be large enough to completely encapsulate military personnel ranging from the 5th percentile female to the 95th percentile male, in accordance with mil-std-1472, and bear their weight without ripping or opening during movement. It shall have adequate space at the head to permit the use of a medical non-breathing mask, endotracheal intubation tubes, supraglottic devices, and cricothyroidotomy tubes.
4.2.3 the cppw shall accommodate patients wearing current army issue tourniquets, splints, backboard, and junctional hemorrhage control devices.
4.2.4 the cppw shall be manufactured of materials which will not cause safety or health hazards to patients or using personnel. Vendors must provide safety or health hazard assessments (such as material safety data sheets (msds)) to indicate their product s assessment in this area.
4.2.5 design will be such that air and carbon dioxide will be exchanged through the cppw. Carbon dioxide buildup shall be less than 3% (by volume) over a 6 hour test period in other than hot climatic regions as defined in army regulation (ar) 70-38. The oxygen level shall not fall below 18% (by volume) over the 6 hour test period in other than hot climatic regions as defined in ar 70-38. The hot climatic region is characterized by two daily weather cycles, one representing the highest temperatures likely to be found anywhere in the world and the other representing extremely high dew points. In hot climatic regions the time limit used will be determined during development, using healthy subjects.
4.2.6 a transparent window shall be located at the head-end of the cppw to allow full head visibility of any size patient (5th percentile female to the 95th percentile male).
4.2.7 the fastening devices of the cppw shall permit medical personnel easy and quick access to patients.
4.2.8 the cppw must have an easily accessible, transparent pocket on its upper side. The pocket shall be able to hold a patient evacuation tag (such as a department of defense (dd) form 1380).
4.2.9 the cppw shall be designed or marked in such a manner to prevent inadvertent reversing of top/bottom and ensure proper use.
4.2.10 the cppw shall permit a patient to extricate him/herself without extreme effort within a time limit of 1 minute. It is recognized that in some situations the patient s injuries or sedation might make this impossible.
4.2.11 the cppw shall allow for passage of intravenous/intraosseous infusion devices and respiratory tubing. Passageways should not exceed .59 inches in diameter. Two such passageways are required.
4.2.12 the cppw shall have some type of carrying handles. The handles must be capable of holding military personnel ranging from the 5th percentile female to the 95th percentile male in accordance with mil-std-1472.
4.3. Packaging and storage characteristics.
4.3.1 internal packaging shall be hermetically seam-sealed using available seam-sealed technologies for chemical protective items.
4.3.2 external packaging must be impervious to rain, dust and saltwater and shall permit rapid access to and employment of the wrap by medical personnel. Packaging materials must be impervious to all known threat agents for a period of time which is sufficient to permit decontamination by weathering.
4.3.3 the cppw will be designed for storage in climatic design types hot and basic in accordance with army regulation 70-38 with no degradation of performance for a minimum period of 10 (ten) years.
4.3.4 packaging dimensions shall not exceed 19.5 in long x 18 in wide x 6.5 in thick.
4.3.5 the blower system shall be able to pass limited rotary-wing airworthiness certification.
4.3.6 the government shall procure the cppw as a kit comprised of 12 individual wraps. The kit shall include all the items (wraps, filters, blowers, batteries, etc.) necessary for each individual patient to have a complete cppw system. The forecasted total procurement quantity is 492 cppw kits, which equates to 5, 904 individual wraps.
5. Additional requirements.
5.1 all items required to use in the kit in a deployed military environment shall be identified by part number, weight and cube to enable the establishment of national stock numbers (nsn).
5.2 vendors shall include the following items with proposal:
5.2.1 equipment support kit lists.
5.2.2 equipment repairable items list.
5.2.3 equipment commercial service manual.
5.2.4 equipment commercial operation/instruction manual.
5.2.5 equipment consumable/durable support items list.
5.2.6 detailed material safety data sheet (msds) for all materials used in manufacturer and/or production of the cppw.
5.2.7 certified report of swatch testing of materiel.
5.3 any modifications to the chemical patient protective wraps during the performacne of this contract that will affect future wrap deliveries, contractor shall notify the contracting officer representative (cor), contracting officer (ko), and contract specialist (cs) within 30 calander days of the modification completion. (deliverable 1)
6. Deliverables
the contractor shall provide electronic copies of the deliverables as described in the below table and in accordance with submission requirements. Deliverables shall be specified by the government.
Item reference title distribution submission requirements

1 son section 5.3 notification of modificatoin to ccpw. Cor, ko, and cs notification required within 30 calendar days of modification completion.
Clauses incorporated by reference
52.202-1 definitions nov 2013

52.203-3 gratuities apr 1984

52.203-11 certification and disclosure regarding payments to influence certain federal transactions sep 2007

52.203-12 limitation on payments to influence certain federal transactions oct 2010

52.203-13 contractor code of business ethics and conduct oct 2015

52.203-17 contractor employee whistleblower rights and requirement to inform employees of whistleblower rights apr 2014

52.204-4 printed or copied double-sided on postconsumer fiber content paper may 2011

52.204-7 system for award management jul 2013

52.204-13 system for award management maintenance jul 2013

52.204-16 commercial and government entity code reporting jul 2015

52.204-17 ownership or control of offeror nov 2014

52.204-18 commercial and government entity code maintenance jul 2015

52.204-19 incorporation by reference of representations and certifications. Dec 2014

52.207-2 notice of streamlined competition may 2006

52.209-2 prohibition on contracting with inverted domestic corporations--representation nov 2015

52.209-10 prohibition on contracting with inverted domestic corporations nov 2015

52.215-20 requirements for certified cost or pricing data or information other than certified cost or pricing data oct 2010

52.219-1 small business program representations oct 2014

52.222-22 previous contracts and compliance reports feb 1999

52.223-5 pollution prevention and right-to-know information may 2011

52.225-25 prohibition on contracting with entities engaging in certain activities or transactions relating to iran-- representation and certifications. Oct 2015

52.229-3 federal, state and local taxes feb 2013

52.232-1 payments apr 1984

52.232-39 unenforceability of unauthorized obligations jun 2013

52.232-40 providing accelerated payments to small business subcontractors dec 2013

52.233-2 service of protest sep 2006

52.242-13 bankruptcy jul 1995

52.242-15 stop-work order aug 1989

52.246-16 responsibility for supplies apr 1984

52.246-17 warranty of supplies of a noncomplex nature jun 2003

52.247-34 f.o.b. Destination nov 1991

52.249-1 termination for convenience of the government (fixed price) (short form) apr 1984

52.249-8 default (fixed-price supply & service) apr 1984

52.252-6 authorized deviations in clauses apr 1984

52.253-1 computer generated forms jan 1991

252.201-7000 contracting officer s representative dec 1991

252.203-7000 requirements relating to compensation of former dod officials sep 2011

252.203-7002 requirement to inform employees of whistleblower rights sep 2013

252.203-7003 agency office of the inspector general dec 2012

252.203-7005 representation relating to compensation of former dod officials nov 2011

252.203-7996 (dev) prohibition on contracting with entities that require certain internal confidentiality agreements - representation (deviation 2016-o0003) oct 2015

252.203-7997 (dev) prohibition on contracting with entities that require certain internal confidentiality agreements (deviation 2016-o0003) oct 2015

252.204-7003 control of government personnel work product apr 1992

252.204-7004 alt a system for award management alternate a feb 2014

252.204-7006 billing instructions oct 2005

252.204-7008 (dev) compliance with safeguarding covered defense information controls dec 2015

252.204-7011 alternative line item structure sep 2011

252.204-7012 (dev) safeguarding covered defense information and cyber incident reporting oct 2015

252.204-7015 disclosure of information to litigation support contractors feb 2014

252.211-7008 use of government-assigned serial numbers sep 2010

252.223-7006 prohibition on storage, treatment, and disposal of toxic or hazardous materials sep 2014

252.225-7001 buy american and balance of payments program-- basic (nov 2014) nov 2014

252.225-7002 qualifying country sources as subcontractors dec 2012

252.225-7012 preference for certain domestic commodities feb 2013

252.225-7021 trade agreements--basic (oct 2015) oct 2015

252.225-7031 secondary arab boycott of israel jun 2005

252.225-7036 buy american--free trade agreement--balance of payments program--basic (nov 2014) nov 2014

252.225-7048 export-controlled items jun 2013

252.232-7003 electronic submission of payment requests and receiving reports jun 2012

252.232-7010 levies on contract payments dec 2006

252.243-7001 pricing of contract modifications dec 1991

252.243-7002 requests for equitable adjustment dec 2012

252.244-7000 subcontracts for commercial items jun 2013

252.246-7000 material inspection and receiving report mar 2008

252.247-7023 transportation of supplies by sea apr 2014
clauses incorporated by full text
52.212-1 instructions to offerors--commercial items (oct 2015)
(a) north american industry classification system (naics) code and small business size standard. The naics code and small business size standard for this acquisition appear in block 10 of the solicitation cover sheet (sf 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.
(b) submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the sf 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--
(1) the solicitation number;
(2) the time specified in the solicitation for receipt of offers;
(3) the name, address, and telephone number of the offeror;
(4) a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;
(5) terms of any express warranty;
(6) price and any discount terms;
(7) "remit to" address, if different than mailing address;
(8) a completed copy of the representations and certifications at far 52.212-3 (see far 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);
(9) acknowledgment of solicitation amendments;
(10) past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and
(11) if the offer is not submitted on the sf 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.
(c) period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.
(d) product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the government, and returned at the sender s request and expense, unless they are destroyed during pre-award testing.
(e) multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.
(f) late submissions, modifications, revisions, and withdrawals of offers:
(1) offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated government office on the date that offers or revisions are due.
(2)(i) any offer, modification, revision, or withdrawal of an offer received at the government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the contracting officer determines that accepting the late offer would not unduly delay the acquisition; and--
(a) if it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the government infrastructure not later than 5:00 p.m. One working day prior to the date specified for receipt of offers; or
(b) there is acceptable evidence to establish that it was received at the government installation designated for receipt of offers and was under the government s control prior to the time set for receipt of offers; or
(c) if this solicitation is a request for proposals, it was the only proposal received.
(ii) however, a late modification of an otherwise successful offer, that makes its terms more favorable to the government, will be considered at any time it is received and may be accepted.
(3) acceptable evidence to establish the time of receipt at the government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of government personnel.
(4) if an emergency or unanticipated event interrupts normal government processes so that offers cannot be received at the government office designated for receipt of offers by the exact time specified in the solicitation, and urgent government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal government processes resume.
(5) offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.
(g) contract award (not applicable to invitation for bids). The government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror s initial offer should contain the offeror s best terms from a price and technical standpoint. However, the government reserves the right to conduct discussions if later determined by the contracting officer to be necessary. The government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.
(h) multiple awards. The government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the schedule, offers may not be submitted for quantities less than those specified. The government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.
(i) availability of requirements documents cited in the solicitation. (1)(i) the gsa index of federal specifications, standards and commercial item descriptions, fpmr part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--gsa federal supply service specifications section, suite 8100, 470 east l enfant plaza, sw, washington, dc

20407, telephone (202) 619-8925, facsimile (202) 619-8978.
(ii) if the general services administration, department of agriculture, or department of veterans affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.
(2) most unclassified defense specifications and standards may be downloaded from the following assist websites:
(i) assist (https://assist.dla.mil/online/start/).
(ii) quick search (http://quicksearch.dla.mil/).
(iii) assistdocs.com (http://assistdocs.com).
(3) documents not available from assist may be ordered from the department of defense single stock point (dodssp) by--
(i) using the assist shopping wizard (https://assist.dla.mil/wizard/index.cfm);
(ii) phoning the dodssp customer service desk (215) 697-2179, mon-fri, 0730 to 1600 est; or
(iii) ordering from dodssp, building 4, section d, 700 robbins avenue, philadelphia, pa 19111-5094, telephone (215) 697-2667/2179, facsimile (215) 697-1462.
(4) nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.
(j) data universal numbering system (duns) number. (applies to all offers exceeding $3, 500, and offers of $3, 500 or less if the solicitation requires the contractor to be registered in the system for award management (sam) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "duns" or "duns +4" followed by the duns or duns +4 numbers that identifies the offeror s name and address. The duns +4 is the duns number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional sam records for identifying alternative electronic funds transfer (eft) accounts (see far subpart 32.11) for the same concern. If the offeror does not have a duns number, it should contact dun and bradstreet directly to obtain one. An offeror within the united states may contact dun and bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the united states must contact the local dun and bradstreet office for a duns number. The offeror should indicate that it is an offeror for a government contract when contacting the local dun and bradstreet office.
(k) system for award management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the sam database prior to award, during performance and through final payment of any contract resulting from this

solicitation. If the offeror does not become registered in the sam database in the time prescribed by the contracting officer, the contracting officer will proceed to award to the next otherwise successful registered offeror. Offerors may obtain information on registration and annual confirmation requirements via the sam

database accessed through https://www.acquisition.gov.
(l) debriefing. If a post-award debriefing is given to requesting offerors, the government shall disclose the following information, if applicable:
(1) the agency s evaluation of the significant weak or deficient factors in the debriefed offeror s offer.
(2) the overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.
(3) the overall ranking of all offerors, when any ranking was developed by the agency during source selection.
(4) a summary of the rationale for award;
(5) for acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.
(6) reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.
Addendum to 52.212-1
additional instructions to offerors
1. Technical questions and pre-proposal discussion
questions concerning the solicitation are due no later than 22 july 2016 at 1:00 p.m. Eastern daylight time. Questions shall be submitted to [email protected]. An amendment to the solicitation will be posted in order to address the questions received; however, no questions will be addressed after the cutoff date and time listed above. Please note that only one (1) set of question will be accepted by the government
2. Instructions for the preparation and submission of proposals

failure to submit all documents concurrently and in accordance with these instructions may render a proposal unacceptable. The proposal shall be submitted electronically via email to [email protected] no later than 8 august 2016 at 1:00 p.m. Eastern daylight time.
3. Proposal evaluation

to aid in evaluation, proposals shall be practical, specific complete, and logically assembled. The proposal shall be in a clear, concise format satisfying all requirements of this solicitation. It shall be in sufficient detail to demonstrate a complete understanding of the work to be accomplished.
4. Technical instructions:

contractors shall provide sufficient written technical documentation to allow for a thorough evaluation of their quote. Additionally, all sections of the offeror s technical quote shall make direct reference to the statement of need (son) and minimum essential characteristics (mecs). The quote shall be presented in a clear and logical order. Statements such as "will comply", "meets the intent of", or "we intend to meet the requirements" and the like, will not suffice for evaluation purposes.
The offeror shall demonstrate that it has a clear understanding of the requirements outlined in the son and mecs and the ability to meet the requirements in order to be considered for award.
Technical quotes shall include sufficiently detailed information to enable evaluation based on the two (2) factors listed below:
1. Technical acceptability -the offerors proposal shall contain sufficient document that demonstrates they have a clear understanding of the requirements outlined in the son, mecs and the solicitation. The offeror must also provide sufficient documentation to clearly demonstrate that their "or equal" product meets the current desired brand specifications. It is the offerors responsibility to provide this information to the government.
In addition to demonstrating a full understanding of the requirements outlined in the son and mecs, the offeror s proposal should include all required documentation detailed in the list below. The offeror may indicate if this information is included in the required documents listed as bullets "b" through "h" of this section (in which case, a separate list need not be provided).the offeror may also indicate if any of the following are not applicable to the proposed system.
Failure to provide the following documents may result in a technically unacceptable proposal rating.
-c equipment support kit lists.

-c equipment repairable items list.

-c equipment commercial service manual.

-c equipment commercial operation/instruction manual.

-c equipment consumable/durable support items list.

-c detailed material safety data sheet (msds) for all materials used in manufacturer and/or production of the cppw.

-c certified report of swatch testing of materiel.
2. Past performance -the contractor shall describe its past performance for up to five (5) but no less than three (3) contracts it has held within the last three (3) years that are for the same or similar supplies to that which is detailed in this solicitation, or affirmatively state the contractor possesses no relevant past performance directly related to or similar to this requirement. Contractors who submit past performance references for similar contracts shall provide a detailed explanation demonstrating the relevance of the contracts to the requirements of the solicitation. The government reserves the right to contact any reference. The contractor shall provide the following information for the points of contact to whom they will provide the past performance questionnaires (attachment 2) for direct submittal to the government.
-c name of the organization that will be providing the reference (exhibit a)

-c name of the individual point of contact (poc)

-c current poc telephone number

-c current poc email address

-c contract number

-c period of performance

-c brief statement explaining the scope of work to include the contract value (in terms of dollars).
The offer shall provide past performance questionnaires (exhibit a) to past performance references/points of contact for contracts of similar nature (size, scope and complexity) to be completed and returned directly to the poc for this requirement. A contract of similar nature is a contract of comparable risk - functions, responsibilities, and control exercised by the contractor which is essentially the same as required under this solicitation.
3. Small business subcontracting plan (sbsp)

the sbsp shall be a separate document from the small business participation plan (which is part of the phase two technical proposal). All offerors, except u.s. Small businesses, shall submit a sbsp that addresses all factors in far 52.219-9 (dev) far 52.219-9 alt ii (dev) and dfars 252.219-7003 (dev). The sbsp will be used to determine contractor responsibility. In addition to the sbsp, offerors shall certify compliance with far clause 52.209-6 and provide sufficient information for the government to determine responsibility of its proposed subcontractors. Note: u.s. Small businesses are not required to submit a sbsp.
The small business subcontracting plan is not a requirement for evaluation in source selection, but rather, a requirement for award to a large business and will be incorporated into any resultant contract.
The goals for this procurement are:
-c small business (sb): 23.0%

-c small disadvantaged business (sdb): 10.0%

-c woman-owned small business (wosb): 5.50%

-c historically underutilized small business (hubzone): 1.0%

-c veteran owned small business (vosb): 3.0%

-c service disabled veteran owned small business: 3.0%
note that all percentage goals listed above are reflect the percentage of subcontracted dollars.
The offeror shall submit a sbsp that addresses the following mandatory elements as found in far 52.219-9 (dev):

-c goals (% based on total planned subcontracting dollars for each small business category)

-c total dollars to be subcontracted (overall and by category)

-c description of principal types of supplies/services to be subcontracted (total and by category)

-c description of method used to develop subcontract goals

-c description of method used to identify potential small business sources

-c indirect costs (included/excluded) and methodology used to determine proportionate share of indirect costs for each category (if included)

-c name of individual administering subcontracting program, description of duties, and location within organizational hierarchy

-c description of efforts to ensure small business has an equitable opportunity to compete for subcontracts

-c assurances that the offer will:

o cooperate in studies/surveys

o submit reports, as required

o submit isr (sf294)/ssr (as required)

-c record keeping: description/procedures/process

-c "flow down" clauses and reporting requirements

o 52.219-8 (utilization of sb concerns)

o 52.219-9 (dev) (subcontracting plan deviation)

o isr (sf294)/ ssr (as required)
note: subcontracting goals are calculated as a percentage of subcontracted dollars.
5. Price quote instructions:

contractor shall specify the total price for each clin in the solicitation. Contractors shall be evaluated to ensure fairness, reasonableness and completeness. The government anticipates award of a firm fixed contract. Adequate competition is anticipated for this acquisition. Contractors shall submit firm-fixed pricing for all the above requirements. Include commercial price lists and if applicable, any federal supply schedule (fss) numbers and pricing. Include any applicable discounts to the government. Quote shall be valid for at least 90 days.
The contractor s initial quote shall contain the contractor s best terms from a cost and technical standpoint. The government intends to evaluate quotes and award an order without discussions, but reserves the right to discussions if later deemed by the contracting officer to be necessary. The government reserves the right to make no award as a result of this solicitation.
6. Organization conflict of interest (oci) mitigation plan

the offeror shall provide an oci mitigation plan (if applicable) as part of its proposal. Offerors are directed to review far 9.5, organizational and consultant conflicts of interest (ocis). Please be advised that the government may not make an award that would result in a prohibited oci. Therefore, offerors shall identify in their proposals any and all potential oci that might result from performing any aspects of the requirement as detailed in the son and mecs, and include proposed means of preventing, avoiding or mitigating each oci identified. If no current or potential oci is identified, then the offeror shall provide a statement within the proposal indicating that oci does not exist for this effort.
7. Additional instructions

system for award management (sam). Offerors must be registered in the sam database to be considered for award. Registration is free and can be completed on-line at https://www.sam.gov/portal/public/sam/; provide duns number; cage code and tax identification number (tin #).
Offerors are reminded to include a completed copy of 52.212-3 alt i with rfq response. All clauses shall be incorporated by reference in the order.
Offerors shall complete dfars 252.209-7992, representation by corporations regarding an unpaid delinquent tax liability or a felony under any federal law-fiscal year 2015 appropriations (deviation 2015-oo0005) (december 2014).
(end of provision)
(a) the government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate offers:
1) technical acceptability

2) past performance

3) price
(b) basis for award & evaluation
this will be a lowest priced/technically acceptable (lpta) procurement. The government intends to evaluate quotations and award a contract without discussions with offerors. The government reserves the right to conduct discussions if the contracting officer later determines them to be necessary. The lpta process is selected as appropriate for this acquisition because the best value is expected to result from selection of the technically acceptable quotation with the lowest evaluated price. An overall technical rating must be at least "acceptable" in order to be eligible for award. An "unacceptable" rating, results in the technical quotation being rated "unacceptable" unless corrected through discussions. An overall technical rating of "unacceptable" makes a quotation ineligible for award. The government reserves the right to make no award as a result of this solicitation.
This requirement is going out as brand name or equal. An offeror is expected to submit sufficient information in response to the rfq to allow for the evaluation of his/her quotation. It is the offerors responsibility to provide information to prove that their item is "or equal" to the required brand.
Each of the evaluation factors will be rated as follows:
factor 1 - technical acceptability: the government will evaluate the offeror s capabilities to provide the brand name or equal as required per attachment 1. The supplies recommended by the contractor will be evaluated in how they satisfy all of the government s requirements as outlined in the statement of non-availability (son) and minimum essential characteristics (mecs).
The offeror s proposal shall include all required documentation detailed in the list below. The following documents shall be submitted as part of the technical acceptability factor. Failure to provide the following documents may result in a technically unacceptable proposal rating.
-c equipment support kit lists.

-c equipment repairable items list.

-c equipment commercial service manual.

-c equipment commercial operation/instruction manual.

-c equipment consumable/durable support items list.

-c detailed material safety data sheet (msds) for all materials used in manufacturer and/or production of the cppw.

-c certified report of swatch testing of materiel.
Table a-1. Technical acceptable/unacceptable ratings

rating description

acceptable proposal clearly meets the requirements of the rfq.

Unacceptable proposal does not clearly meet the requirements of the rfq.
Factor 2 - past performance: offeror s past performance references questionaires, submitted directly from their references, will be reviewed and considered in assigning a rating. Offerors are reminded that while the government may elect to consider data obtained from other sources, the burden of demonstrating relevancy, recency, and quality of the past performance rests with the offeror. Other sources available to the government include, but are not limited to, the past performance information retrieval system (ppirs) and federal awardee performance and integrity information system (fapiis).
In the case of an offeror without a record of recent/relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance in accordance with far 15.305(a)(2)(iv). Therefore, the offeror shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
past performance evaluation ratings

rating description

acceptable based on the offeror s performance record, the government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror s performance record is unknown.

Unacceptable based on the offeror s performance record, the government has no reasonable expectation that the offeror will be able to successfully perform the required effort.
Factor 3 - price: (all clins shall be priced per attachment 1)
offerors price proposals will be evaluated to determine whether the price is complete, fair and reasonable. The government s determination that the proposed price is fair and reasonable will be based on price evaluation and analysis using the techniques in far 15.305(1), which provides that comparison of the proposed prices will usually satisfy the requirement for price analysis.
(c) a written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.
(end of provision)
52.212-3 offeror representations and certifications--commercial items (nov 2015)
the offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certification electronically via the system for award management (sam) web site accessed through http://www.acquisition.gov. If the offeror has not completed the annual representations and certifications electronically, the offeror shall complete only paragraphs (c) through (p) of this provision.
(a) definitions. As used in this provision --
"economically disadvantaged women-owned small business (edwosb) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily

business operations of which are controlled by, one or more women who are citizens of the united states and who are economically disadvantaged in accordance with 13 cfr part 127. It automatically qualifies as a women-owned small business eligible under the wosb program.
"forced or indentured child labor" means all work or service-

(1) exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(2) performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity

owns or exercises control of the highest level owner.
Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 u.s.c. 395(b), applied in accordance with the rules and definitions of 6 u.s.c. 395(c).
Manufactured end product means any end product in product and service codes (pscs) 1000-9999, except--
(1) psc 5510, lumber and related basic wood materials;
(2) product or service group (psg) 87, agricultural supplies;
(3) psg 88, live animals;
(4) psg 89, subsistence;
(5) psc 9410, crude grades of plant materials;
(6) psc 9430, miscellaneous crude animal products, inedible;
(7) psc 9440, miscellaneous crude agricultural and forestry products;
(8) psc 9610, ores;
(9) psc 9620, minerals, natural and synthetic; and
(10) psc 9630, additive metal materials.
Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
Restricted business operations means business operations in sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the sudan accountability and divestment act of 2007 (pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in section 2 of the sudan accountability and divestment act of 2007) conducting the business can demonstrate--
(1) are conducted under contract directly and exclusively with the regional government of southern sudan;
(2) are conducted pursuant to specific authorization from the office of foreign assets control in the department of the treasury, or are expressly exempted under federal law from the requirement to be conducted under such authorization;
(3) consist of providing goods or services to marginalized populations of sudan;
(4) consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;
(5) consist of providing goods or services that are used only to promote health or education; or
(6) have been voluntarily suspended.
Sensitive technology--
(1) means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--
(i) to restrict the free flow of unbiased information in iran; or
(ii) to disrupt, monitor, or otherwise restrict speech of the people of iran; and
(2) does not include information or informational materials the export of which the president does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the international emergency economic powers act (50 u.s.c. 1702(b)(3)).
Service-disabled veteran-owned small business concern--
(1) means a small business concern--
(i) not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and
(ii) the management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.
(2) service-disabled veteran means a veteran, as defined in 38 u.s.c. 101(2), with a disability that is service-connected, as defined in 38 u.s.c. 101(16).
"small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on government contracts, and qualified as a small business under the criteria in 13 cfr part 121 and size standards in this solicitation.
Small disadvantaged business concern, consistent with 13 cfr 124.1002, means a small business concern under the size standard applicable to the acquisition, that--
(1) is at least 51 percent unconditionally and directly owned (as defined at 13 cfr 124.105) by--
(i) one or more socially disadvantaged (as defined at 13 cfr 124.103) and economically disadvantaged (as defined at 13 cfr 124.104) individuals who are citizens of the united states; and
(ii) each individual claiming economic disadvantage has a net worth not exceeding $750, 000 after taking into account the applicable exclusions set forth at 13 cfr 124.104(c)(2); and
(2) the management and daily business operations of which are controlled (as defined at 13.cfr 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.
Subsidiary means an entity in which more than 50 percent of the entity is owned--
(1) directly by a parent corporation; or
(2) through another subsidiary of a parent corporation.
Veteran-owned small business concern means a small business concern--
(1) not less than 51 percent of which is owned by one or more veterans (as defined at 38 u.s.c. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and
(2) the management and daily business operations of which are controlled by one or more veterans.
"women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.
"women-owned small business concern" means a small business concern--
(1) that is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or
(2) whose management and daily business operations are controlled by one or more women.
Women-owned small business (wosb) concern eligible under the wosb program (in accordance with 13 cfr part 127)", means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the united states.
(b) (1) annual representations and certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the sam website.
(2) the offeror has completed the annual representations and certifications electronically via the sam website accessed through https://www.acquisition.gov. After reviewing the sam database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at far 52.212-3, offeror representations and certifications--commercial items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the naics code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see far 4.1201), except for paragraphs ___ .
(offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) these amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on orca.)
(c) offerors must complete the following representations when the resulting contract will be performed in the united states or its outlying areas. Check all that apply.
(1) small business concern. The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a small business concern.
(2) veteran-owned small business concern. (complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) the offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern.
(3) service-disabled veteran-owned small business concern. (complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) the offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.
(4) small disadvantaged business concern. (complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) the offeror represents that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 cfr 124.1002.
(5) women-owned small business concern. (complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) the offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.
Note to paragraphs (c)(8) and (9): complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.
(6) wosb concern eligible under the wosb program. (complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.) the offeror represents that--
(i) it ( ___ ) is, ( ___ ) is not a wosb concern eligible under the wosb program, has provided all the required documents to the wosb repository, and no change in circumstances or adverse decisions have

been issued that affects its eligibility; and
(ii) it ( ___ ) is, ( ___ ) is not a joint venture that complies with the requirements of 13 cfr part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each wosb concern eligible under the wosb program participating in the joint venture. (the offeror shall enter the name or names of the wosb concern eligible under the wosb program and other small businesses that are participating in the joint venture: ___ .) each wosb concern eligible under the wosb program participating in the joint venture shall submit a separate signed copy of the wosb representation.
(7) economically disadvantaged women-owned small business (edwosb) concern. (complete only if the offeror represented itself as a wosb concern eligible under the wosb program in (c)(6) of this provision.) the offeror represents that--
(i) it ( ___ ) is, ( ___ ) is not an edwosb concern, has provided all the required documents to the wosb repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) it ( ___ ) is, ( ___ ) is not a joint venture that complies with the requirements of 13 cfr part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each edwosb concern participating in the joint venture. (the offeror shall enter the name or names of the edwosb concern and

other small businesses that are participating in the joint venture: ___ -.) each edwosb concern participating in the joint venture shall submit a separate signed copy of the edwosb representation.
(8) women-owned business concern (other than small business concern). (complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) the offeror represents that it ( ___ ) is, a women-owned business concern.
(9) tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___
(10) hubzone small business concern. (complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) the offeror represents, as part of its offer, that--
(i) it ( ___ ) is, ( ___ ) is not a hubzone small business concern listed, on the date of this representation, on the list of qualified hubzone small business concerns maintained by the small business administration, and no material changes in ownership and control, principal office, or hubzone employee percentage have occurred since it was certified in accordance with 13 cfr part 126; and
(ii) it ( ___ ) is, ( ___ ) is not a hubzone joint venture that complies with the requirements of 13 cfr part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each hubzone small business concern participating in the hubzone joint venture. (the offeror shall enter the names of each of the hubzone small business concerns participating in the hubzone joint venture: ___ .) each hubzone small business concern participating in the hubzone joint venture shall submit a separate

signed copy of the hubzone representation.
(d) certifications and representations required to implement provisions of executive order 11246--
(1) previous contracts and compliance. The offeror represents that--
(i) it ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject either to the equal opportunity clause of this solicitation, the and
(ii) it ( ___ ) has, ( ___ ) has not, filed all required compliance reports.
(2) affirmative action compliance. The offeror represents that--
(i) it ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the secretary of labor (41 cfr subparts 60-1 and 60-2), or
(ii) it ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the secretary of labor.
(e) certification regarding payments to influence federal transactions (31 u.s.c. 1352). (applies only if the contract is expected to exceed $150, 000.) by submission of its offer, the offeror certifies to the best of its knowledge and belief that no federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a member of congress, an officer or employee of congress or an employee of a member of congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the lobbying disclosure act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, omb standard form lll, disclosure of lobbying activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.
(f) buy american certificate. (applies only if the clause at federal acquisition regulation (far) 52.225-1, buy american --supplies, is included in this solicitation.)
(1) the offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than cots items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the united states. The offeror shall list as foreign end products those end products manufactured in the united states that do not qualify as domestic end products, i.e., an end product that is not a cots item and does not meet the component test in paragraph (2) of the definition of "domestic end product." the terms "commercially available off-the-shelf (cots) item, " "component, " "domestic end product, " "end product, " "foreign end product, " and "united states" are defined in the clause of this solicitation entitled "buy american--supplies."

(2) foreign end products:
line item no. Country of origin

___

___
___

___
___

___
(list as necessary)
(3) the government will evaluate offers in accordance with the policies and procedures of far part 25.
(g)(1) buy american--free trade agreements--israeli trade act certificate. (applies only if the clause at far 52.225-3, buy american--free trade agreements--israeli trade act, is included in this solicitation.)
(i) the offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than cots items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the united states. The terms ``bahrainian, moroccan, omani, panamanian, or peruvian end product, ``commercially available off-the-shelf (cots) item, ``component, ``domestic end product, ``end product, ``foreign end product, ``free trade agreement country, ``free trade agreement country end product, ``israeli end product, and ``united states are defined in the clause of this solicitation entitled ``buy american--free trade agreements--israeli trade act.
(ii) the offeror certifies that the following supplies are free trade agreement country end products (other than bahrainian, moroccan, omani, panamanian, or peruvian end products) or israeli end products as defined in the clause of this solicitation entitled ``buy american--free trade agreements--israeli trade act :
free trade agreement country end products (other than bahrainian, moroccan, omani, panamanian, or peruvian end products) or israeli end products:
line item no. Country of origin

___

___
___

___
___

___
(list as necessary)
(iii) the offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "buy american-free trade agreements-israeli trade act." the offeror shall list as other foreign end products those end products manufactured in the united states that do not qualify as domestic end products, i.e., an end product that is not a cots item and does not meet the component test in paragraph (2) of the definition of "domestic end product."

other foreign end products:

line item no. Country of origin

___

___
___

___
___

___
(list as necessary)

(iv) the government will evaluate offers in accordance with the policies and procedures of far part 25.

(2) buy american act-free trade agreements-israeli trade act certificate, alternate i (jan 2004). If alternate i to the clause at far 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) the offeror certifies that the following supplies are canadian end products as defined in the clause of this solicitation entitled "buy american -free trade agreements-israeli trade act":

canadian end products:

line item no.

___
___
___
(list as necessary)
(3) buy american-free trade agreements-israeli trade act certificate, alternate ii (jan 2004). If alternate ii to the clause at far 52.225-3 is included in this solici

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Police GBRS Sling Bundle USA 152599332 23 Nov 2026
Police Pelican Foam USA 152599330 23 Nov 2026
6001-Emergency Preparedness-Delton Webcam USA 152599327 23 Nov 2026
Police Helmet Chin Guard USA 152599323 23 Nov 2026
Police: Ammunition USA 152599319 23 Nov 2026

USA Public Procurement Intelligence

Frequently asked questions

The bid deadline for Usammda Chemical Patient Protective Wrap (Cppw) Kits was 08 Aug 2016. Bidding is closed.

This tender has been issued by DEPARTMENT OF THE ARMY in USA.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 35800000 - Individual and support equipment.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 7239861. The purchaser document reference is W81XWH-16-R-0059.

See the Similar Tenders section on this page or browse other tenders from USA.

This tender falls under Defence and Security in USA. Suppliers in these sectors can track similar USA tenders using CPV-based alerts.