Tender notice from Slovakia, published on 04 Nov 2014.
Executive Summary
The Slovenske elektrarne, a.s. Bratislava has issued a Tender notice for the procurement of a Turbine works in the Slovakia. This Tender notice was published on 04 Nov 2014 and is scheduled to close on 04 Nov 2015, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 1912874, while the tender notice number is 376139-2014 and Register on the platform.
Object of the contract Category A and B - General and routine repairs turbín.1. Correction bodies turbines and rotorov.1.1. Parts of bodies turbines - tops and bottoms - disassembly, inspection and detection of faults : internal and external bodies; prevádzacích nozzle and pipe; rozvádzacích wheels, stern bodies and labyrinth rings; equipment for heating flanges and studs bodies; wedging bodies and spacing Torsionek, accessible to determine faults ( without removing the undersides foreign bodies ), - removal of defects, including the removal of vertical joints for leaks, cracks elimination of identified feathering and cooked on the body of turbo-generator ( TG ) and the valve body, including the alignment of horizontal surfaces of joints bodies TG ( dividing planes ), stern bodies and horizontal alignment surfacesCommunications ( del.rovín ) rozvádzacích wheels; ensure centering the flow of parts and end seals turbine in accordance with applicable standards; security clearances in the flow of the turbine in accordance with applicable standards; activities related to NDT inspection ( TG surface grinding bodies and valve bodies, pipe nozzle including handling when turning, sampling in the control conditionand life bodies TG ) - return montáž.1.2. Rotors : - disassembly, inspection and detection of faults and trusses blades, discs, sealing plates, pins rotor - the removal of defects, including the exchange wire trusses, by rolling pins, grind faces couplings, control deflection rotors - replacement blades " X " impeller rotor according to the desired specifications - centering shoulder and repair rotThe level according polspojok.2. Bearing blocks and turbine bearings - removal of age lie. stands and bearings, inspection, defect detection and removal of defects radial and thrust bearings, bearing blocks radiators, oil seals, V- connections and expander bolts, including cleaning bearing block - repair scraped or re- pouring the composition of bearings, bearing shell, Treatment of, or be renewed thrust bearings and radial bearings - replacement of sealing metal inserts bearings and oil bearing blocks - replace gasket - oil seals - scraped surface horizontal joint bearings - shoulder and centering bearings - Replacing bearings and bearing age stojanov.3. Couplings TG : - inspection and detection of faults and connecting polospojok diehunting ( clutch bolts and nuts, locking bolts, etc., - elimination of defects, including the scraped ends polospojok - machining holes for connecting bolts to the exchange bolts - clearance and repair breaks the rotor axis ( " pendulum " ) when paired polospojok - verification and correction shifts the rotor axis when paired polospojok.4. Adaptive equipment : - disassembly, inspection and detectiondefects, removal of defects nodes and parts of the swing equipment, including gears, the mechanism of connection - disconnection, bearings, replacement of damaged parts and return montáž.5. Control system : - deduction of values ??, test and accurate capture characteristics of the control system to a standstill before the turbine repair, overhaul and review of leak - detection of defects regulatory elements, transducers, protectiveAn oil pump head, - servo valves and dampers included in the control system - hydraulic system including : fittings and pipe - cleaning hydraulic system, filling the working fluid, hydraulic system leakage clearance, removal of defects; cleaning of tanks, filters and coolers working fluid and the Service ( mounted ) devices - ETAvena testing ( determination of the control parameters, accurate capture characteristics ) control system, including : setting and checking the decommissioning of the turbine and setting and checking the running naprázdno.6. Oil system : - disassembly, inspection and detection of faults fittings; elimination of defects with replacement of damaged parts - cleaning oil tanks, filters and oil pipelines - Clearancecooling systems oil - perform hydrodynamic flushing oil pipelines and installation of the provisional flushing, - cleaning and detecting defects oil cooler - oil leakage verification system, the removal of identified závad.7. Steam system and drainage : - Fault detection and repair of steam distribution nodes, including : closing, regulatory, separating protective valves and blocks ventihunting; flaps - metal control valve bodies, replacement of defective parts fixing, - setting and checking the decommissioning of the turbine and setting and checking idling, - detect faults and repair drainage fittings including checking the patency of the watering, 8th Repairs and inspections of high-pressure turbine rotors ( VT ) and low pressure ( NT ) works vyvážením.Rotory : - disassembly, inspection and checkanie defects blades and bandages, discs, sealing plates, pins rotor - the removal of defects, including the exchange wire trusses, by rolling pins, grind faces couplings, control deflection rotors - replacement blades " X " impeller rotor according to desired specifications, - dynamic balancing rotors - centering shoulder and repair rotors on spojkách.9. Water jet / steam jet ejectors( Pump) : - complete disassembly, replacement or repair of defective parts, - inspection, defect detection, and repair of body water chamber - setting the clearances between the nozzles and diffusers, - hydraulic test assembled, remove závad.Kategória C - inspection and repair turbine rotors : - entry check, the exposure protocol, compare data with historical data - an indication, and to measure the axiald downloading - download the entire rotor (couplings, seals, impellers ) - Interference impellers and couplings - defectoscopy shaft and impeller bore, - insurance replacement sheet blading NT5 and NT5A - nabodovanie stainless steel sheet according to the results of the scan overlaps, - stretching the entire rotor - electromagnetic control of all revolving blades, - preparation of the balance, indicationsia, - dynamic balancing of the rotor in the tunnels for the entire speed range, - an indication of the tunnels - preservation rotor - construction and delivery of documentation oprave.Kategória D - Diagnostics turbines - the flow of vibration and accessories, including regulation turbín.Meranie vibration TG way off - line within the predictive maintenance should include measurement of the following parameters : - measurement of the velocity vector( amplitude and phase ) : - absolutely stator vibration generator TG - effective vibration severity in mm / sec. ( VEF ) - relative rotor vibration generator TG - displacement um ( SP - P ), - absolutely rotor vibration generator TG - displacement um ( SP - P ) - cardinality of the vector angle of oscillation of the rotor vibration - ? ( deg), - the analysis of the measured values ??of vibration rotor system under STNISO 7919-2 and 10816-2, - measurement of start-up and braking characteristics of TG and generator - the analysis of changes passing through the critical speed of the rotor and changes the shape of the runway Wednesday pins rotor - drawing record measurements, and recommendations for further revisions and final weight of the rotor system.Diagnostika oil. regulation and regulatory settings ?lenov.Diagnostika oil. regulation after weaning TG to opravy.Diagnostic oil. regulation after repair TG. Description: Turbine works Authority Type: Utilities Contact Nature: Works Procedure: Not applicable Document: Qualification system without call for competition Regulation: European Union, with participation by GPA countries Award criteria: Lowest price CPV code: 45315200 CPV Description: Turbine works.   Internet address (URL): www.seas.sk Directive: Classical Directive (2004/17/EC)
The bid deadline for Turbine works was 04 Nov 2015. Bidding is closed.
This tender has been issued by Slovenske elektrarne, a.s. Bratislava in Slovakia.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 45315200 - Turbine works.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 1912874. The purchaser document reference is 376139-2014.
This tender falls under Construction and Real Estate in Slovakia. Suppliers in these sectors can track similar Slovakia tenders using CPV-based alerts.