Tungsten halogen filament lamps Tender in Poland - 7440279
Tender notice from Poland, published on 25 Jul 2016.
Executive Summary
The 43 WOG has issued a Tender notice for the procurement of a Tungsten halogen filament lamps in the Poland. This Tender notice was published on 25 Jul 2016 and is scheduled to close on 31 Aug 2016, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 7440279, while the tender notice number is 255442-2016 and Register on the platform.
1. The contract is for delivery with transport and unloading to the warehouse Employer consumables for vehicles (divided into 18 tasks partial), consistent with the description of the order and Polish standards conveying European standards zharmonizowane.2. Numbers, names given in the forms of price are provided for inykonawcow to precisely specify the desired range. Employer allows materials of comparable quality and identical przeznaczeniu.3. Offered goods must comply with all parameters specified in the terms of reference and the price form and quality requirements specified in the manufacturer's technical documentation for the specific product, to bei?1/2brand new (I cat.), unused and free from defects and possess the qualities of the original packaging intact, with the markings of the manufacturer and catalog number (if any) .4. The name of the product offered is the substantive content of the offer, as it serves to identify and concretization offered item orders and the subsequent subject of the contract, and therefore failure toi?1/2Contractor by product name (the name given by the manufacturer) if the Employer of the name specifications required provisions, makes the content of the offer is incompatible with the content of the specification. Offer may not be capable of additional exploration of its content, it must be clear in order to be able to submit its verification as to its compatibilitythe content of SIWZ.5. Employer does not allow remanufactured goods: they will not be considered rownoważne6. Ordering a possibility tender equivalent to the supplies, provided that: a) the equivalent consumables (other companies than those mentioned in the specification) are brand new, with no signs of use and damage, in original, closed manufacturer's packaging, wholesome. The term, , brand new "must be understood materials, which in its entire production process (except for the cardboard packaging, if any) are made from scratch, without in any way of components derived from other products; b) if during the contract Purchaser finds thati?1/2performance or quality of the delivered products adversely differ from the parameters of the product specified by the Employer, the Contractor shall at the request of the Employer should the material offered in the range, whose request is for, replace new material, meeting the requirements of the Purchaser. In the case of the third complaint of a type of replacement product Purchaser has prawo require the supply of materials indicated in the price form by the Employer and the Contractor is obliged to deliver such materials in the unit prices of offer set out in the agreement. Such a change assortment of delivery shall not constitute a change in the contract or offer, on the basis of which the contract will be concluded; c) In accordance with art. 30 paragraph. 5 Public Procurement Lawinter-related contractor, who will offer products equivalent to those described by the Employer is obliged to prove that he offered supplies meet the requirements set by the Employer. The contractor submitting a bid for equivalent products must be accompanied by appropriate certificates / SDS / documents confirming the equivalence of the materials offered eksploatacyjnych.10. Delivered products must be packaged and preserved by ensuring the preservation of their properties and parameters of technical-operational during transport and storage conditions magazynowych.11. Each package in a permanent way must be affixed by the manufacturer label opakowania.12. The label of each package must be pOdana material name and the name of the manufacturer. All this information should be written in polskim.13. Packages must be factory sealed, in case of differences in packaging factory, it must be possible to check the contents of the package and producenta14. The Contractor undertakes to mark the goods barcode, ie. Materials should be marked koeach symbol in accordance with the Decision No 3 / MON of the Minister of National Defence 01.03.2014 on the guidelines defining the requirements for labeling barcode products supplied to the Ministry of National Defence. The supplied materials should be marked in accordance with i?1/2 4 point 1, 4 and 5 (material group 4 and 5) in / in the decision. The applied label must meet the dimensionsfor enforcing specified in i?1/2 5 for the material group 4 and 5 in / in the decision. The location of the labels on the packaging describes i?1/2 5 item 7, 8 and 9 in / in decyzji.15. With the obligation to mark the barcode are excluded materials purchased in quantities of less than standard packaging factory, if the manufacturer (Supplier, Contractor) does not mean a single product barcodebut it is applied on the packaging for example. electrode, sand, żwir.16. The contractor is required to provide filled out the product in electronic form (MS EXEL format) to all recipients subject of an order specified in the agreement, the Terms of Reference in accordance with Annex No. 6 in / in the decision. Supplier gives recipients filled card product at the latest on dostawy.17. Towary subject supplies will be subject to acceptance quantitative and qualitative at the Purchaser for compliance of technical parameters in the presence of a representative of the Contractor (in case of delivery of orders by courier) .18. On the range, for which the manufacturer determines the warranty period, the Contractor is obliged to provide the samei?1/2the warranty period calculated from the date of delivery to the Purchaser. The Contractor must give the Employer guarantee documents supplied goods, if such grant producent.19. In the event of a warranty period of physical defects of delivered goods Employer shall notify the Contractor in the form of a "Protocol of complaint" within 14 days from the date revealeddown disadvantages. In this case, the Artist: a. consider "The protocol complaint" within 7 days from the date of its receipt, b. remove the defect within 14 days from the date of consideration of the 'Memorandum of complaint ", c. in the absence of removal of defects range, the Contractor shall replace it with a new, free from defects, within 14 days from the date of consideration of the 'Memorandum of complaint ".20. The contractor is responsible for quality and compliance with technical and quality standards set for the item orders. Due diligence is required in the implementation of obligations under the umowy.21. The guarantee is extended by the time in which due to defects in the range Purchaser he could not use it. Transport defective product to theymiany and after the exchange is at the expense and responsibility of the Contractor. The contractor will replace at no additional charge, even if the prices were zmianie.22. The place of supply will be warehouses Military Unit 5350 in Świętoszi?1/2w in the magazine :: Żagań ul. Żarska 1: for the magazine Głogow ul. Polish Army 58: for the magazine Swietoszow ul. Sztabowa 1: for the magazine Bolesławiec ul. Army Polskiego23. Transport costs associated with the delivery of goods shall be borne by the Contractor. The findings and decisions on the implementation of orders and deliveries shall be agreed by the Employer with established representative Wykonawcy.24. Liability for damages arising in connection with transport delivery until receipt by the Purchaser bears Wykonawca.25. performWCA will be obliged to issue separate invoices for each organizational unit, taking into account the location of magazines, giving the catalog numbers. Description: Tungsten halogen filament lamps Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
The bid deadline for Tungsten halogen filament lamps was 31 Aug 2016. Bidding is closed.
This tender has been issued by 43 WOG in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 31512000 - Tungsten halogen filament lamps, 31211300 - Fuses, 42913000 - Oil, petrol and air-intake filters.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 7440279. The purchaser document reference is 255442-2016.
This tender falls under Defence and Security, Technology and Equipment in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.