Taps, cocks, valves and similar appliances Tender - 2151563
Tender notice from Slovakia, published on 10 Dec 2014.
Executive Summary
The Slovenske elektrarne, a.s., Bratislava has issued a Tender notice for the procurement of a Taps, cocks, valves and similar appliances in the Slovakia. This Tender notice was published on 10 Dec 2014 and is scheduled to close on 10 Dec 2015, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 2151563, while the tender notice number is 419837-2014 and Register on the platform.
Object of the contract Description skupiny.Zákazky material for the products include the design, manufacture and testing of closing, the door, hand or power -operated valves for use in conditions of low and medium pressure, including (if necessary ) motors, gearboxes and control devices, which are larger than 2 '''', intended for use in thermal power plants and classified according to the following classes aSME 16.34 - 150 standard - standard 300 - 600 štandardné.Okrem indications given in the specifications ENEL - in is usually also require the following services : - functional, realization and detailed design of supplied products, mainly including the following : - a proposal proportional the size of the drive to be installed on component - the perfect sealing materials depending on the operating temperature of the valve- Design for all aspects necessary for the proper connection of the valve to the pipe, drive and pointing device - design of the equipment necessary for assembly, installation, dismantling and maintenance of valve - planning and management of the design and / or activities related to production, in particular : - - liaising with third parties and / or third-party security surveillance Troubleshooter interface ( joiningie, support, civil works, piping etc.... ) - Demonstrate the correct use technology (processes, personnel and tools ) included in the structural design, with particular regard to the properties of advanced technologies, - management plan preparation quality, which must be submitted for approval - testing, monitoring and testing at the plant - labeling, finishes, storage, modification, maintenance, transport and, where appropriate, on-site installation, - preparation of certification documentation - After podpora.Pre each individual contract is also required for the creation of data for planning and development of individual design and production activities in accordance with the methods specified ENEL om.Technické charakteristiky.Všeobecné informácie.Dané valves are shut ( valves and ball valves ), check or combined( closing check valve ) valves, designed in compliance with ASME B16.34, with endings prepared for butt-welding ( BW ) in accordance with ASME B 16.25, or flanges according to ASME B16.5.Požadovaná life of valves for reference purposes only during the design is 25 rokov.Dopl?ujúce information on the characteristics and regulations applicable to that contract shall be included in the technical specifications thatENEL will provide for all individual zákazky.Funk?né and structural specifications described below are general and are provided as a non-limiting example, given the diversity of types of valves used in thermal elektrár?ach.Materiálové design ( material properties ).Materiály used for different parts of the valve must meet ASTM standard material, ISO and EN and must be suitable for the projectopinion and for use with liquids given on the data sheets; the construction of major parts usually require the following materials : - carbon steel ( WCB A216 - A105 - A216 WCC ) - Low alloy steel ( WC6 A217 - A182 F11 - WC9 A217 - A182 F22 ) - 9 % Cr steel ( A217 C12Q - A182 F91 ).All valves must, if required ( in the data document ) include seats and stellite coated tlBattery exposed parts ( stellite grade H6 ).All bowling, sliders and combined closing and check valves must be supplied with backup ( back ) seat for the exchange of seals during operation when fully open ventile.Všetky valves shall be equipped with thrust bearings, stored in a yoke valve.In the case of a request ( in the data document ) must be used, screw caps cover with selfesnením or bayonet lock and uzáveru.Všetky valves shall when required ( in the data document ) includes members localizing pressure, with flexible klinom.Kontroly and skúšky.Plánujú the following tests : - tests on components and semi - controls at the plant - control during installation - final inspection in the závode.Musia submit all certificates proving the origin of chemical and mechanicka properties of components subjected to pressure and servopohonoch.Musí be visually controlled in accordance with MSS SP- 55; surface and volume control must be carried out according to the technical specifications ENEL-u.Na all valve components must perform dimensional inspection to verify their compliance with the projected štruktúrou.Certifikáty for test, control, and materials must indicate the value ofaznamenané during tests and inspections, assessment of these values ??, methods, and reference standards used postupy.Nariadenia.Nižšie are shown for reference of the valves, which are detailed in the specification ENEL - in : - ASME B16.34 - MSS SP 55 - API 600.Ventily must also comply with the requirements of Directive 97/23 / EC on pressure equipment. Description: Taps, cocks, valves and similar appliances Authority Type: Utilities Contact Nature: Supply contract Procedure: Not applicable Document: Qualification system without call for competition Regulation: European Union, with participation by GPA countries Award criteria: Lowest price CPV code: 42130000 CPV Description: Taps, cocks, valves and similar appliances.   Internet address (URL): www.seas.sk Directive: Classical Directive (2004/17/EC)
The bid deadline for Taps, cocks, valves and similar appliances was 10 Dec 2015. Bidding is closed.
This tender has been issued by Slovenske elektrarne, a.s., Bratislava in Slovakia.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42130000 - Taps, cocks, valves and similar appliances.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 2151563. The purchaser document reference is 419837-2014.