Expired Tender Slovakia ICB TOT Ref. 2151560

Taps, cocks, valves and similar appliances Tender - 2151560

Tender notice from Slovakia, published on 10 Dec 2014.

Executive Summary

The Slovenske elektrarne, a.s., Bratislava has issued a Tender notice for the procurement of a Taps, cocks, valves and similar appliances in the Slovakia. This Tender notice was published on 10 Dec 2014 and is scheduled to close on 10 Dec 2015, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 2151560, while the tender notice number is 419835-2014 and Register on the platform.

Key facts

Summary
Taps, cocks, valves and similar appliances
TOT Ref. No.
2151560
Document Ref. No.
419835-2014
Country
Slovakia
Notice type
Tender
Competition
ICB
Publication date
10 Dec 2014
Bid deadline
10 Dec 2015
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Description skupiny.Zákazky material for the products include the design, manufacture and testing of closing, the door, hand or power -operated valves for use in conditions of high pressure and high temperature, including (if necessary ) motors, gearboxes and control devices, which are larger as 2 '', intended for use in thermal power plants and classified according nasledujúcich classes ASME B16.34 - 900 Standard - 1500 Standard - 2500 Standard - 2500 special - Standard 4500 - 4500 special - over 4500 special - Valves assessed by projektu.Okrem indications given in the specifications ENEL - in usually also require the following services : - functional, realization and detailed design of supplied products, mainly including the following : - a proposal proportional to sizei drive to be installed on component - the perfect sealing materials depending on the operating temperature of the valve - design all aspects necessary for the proper connection of the valve to the pipe, drive and pointing device - design of the equipment necessary for assembly, installation, removal and maintenance of the valve - the planning and management of the design and / or activities related to production, in particular : - securityBaking cooperation with third parties and / or third-party security surveillance Troubleshooter interface ( alignment, support, civil works, piping etc.... ) - demonstrate the correct use technology (processes, personnel and tools ) included in the structural design, with particular regard to the properties of advanced technologies, - management plan preparation quality, which must be prarrives with the approval - testing, inspection and testing at the plant - labeling, finishes, storage, modification, maintenance, transportation, and, where appropriate, on-site installation, - preparation of certification documentation - After podpora.Pre each individual contract is also required for the formation of data the planning and development of individual design and production activities in accordance with the methods specified ENEL om.TechnickStar charakteristiky.Všeobecné informácie.Dané valves are shut ( valves and ball valves ), rear or combined ( closing check valve ) valves, designed in compliance with ASME B16.34, with endings prepared for butt-welding ( BW ) in accordance with ASME B 16.25.Požadovaná life valves for reference purposes during the design is 25 rokov.Kombinované valves ( closing rear ) for steam afteruse must be of high quality manufacturers with excellent references ( valves shall be installed and operated at least 5 years ).Uzatváracie check valves shall be designed considering the following : first plug must be fully operable; second the design must be considered the minimum rate at which the valve opens, and the number of regulation in the critical range, the third Maximum noise level: 85 dBA( a distance of 1 m from the valve ).Ventily highest class rating 900-4500 #, main drainage and vent valves of the drum, superheated and reheated steam must have a specific design and production requirements, because failure of the component may lead to the following : - the exposure of individuals - causing significant loss of effect - causing significant to lose controli.Výrobca must provide a reference list of previous deliveries. Requirements are mainly the following issues : a. List of high pressure valves type " valve, ball, reverse and combined ( re- closing ) ", which are installed in power longer than 5 years (according to the Pressure Equipment Directive ); b. List of valves, which are at least two years'' successful operation ( list to príslear Client ), c. Gates referred to above must be designed in accordance with the following : - Temperature : 540 ° C or more, - pressure : 140 bar or more - Materials : Low-alloy and alloy steel ( eg ASTM A217 or A217 WC9 C12A ).Dopl?ujúce information on the characteristics and regulations applicable to that contract shall be included in the technical specifications that ENEL will provide for all jencountered by individual contract. Functional and structural specifications described below are general and are referred to as non-limiting example, given the diversity of types of valves used in thermal elektrár?ach.Materiálové design ( material properties ).Materiály used for different parts of the valve must meet the material standard ASTM, ISO, EN and suitable the design and the conditions of use in kvaPalin listed on the data sheets; the construction of major parts ( components) are normally require the following materials : - carbon steel ( WCB A216 - A105 - A216 WCC ) - Low alloy steel ( WC6 A217 - A182 F11 - WC9 A217 - A182 F22 ) - 9 % Cr steel ( C12Q A217 - A182 F91 ).All valves must contain seats and stellite coated pressure exposed portion ( stellite grade H6 ).All bowling afterSuvaco a combined closing and check valves must be supplied with backup ( back ) seat for the exchange of seals during operation of the valves fully open ventile.Všetky must include a member of localizing pressure, with flexible klinom.Všetky valves must include a protective device for a random excessive pressure which may arise in the area between the cover and the sealing components when the valveil uzavretý.Kontroly and skúšky.Plánujú the following tests : - tests on components and semi - controls at the plant - control during installation - final inspection in závode.Musia shall submit all certificates proving the origin of chemical and mechanical properties of pressurized components and actuators.mus be visually controlled in accordance with MSS SP- 55; surface and volume controlsand must be made in accordance with the technical specifications ENEL-u.Na all valve components must be carried dimensional inspection to verify their compliance with the projected štruktúrou.Certifikáty for tests, checks and documents must state the value recorded during the tests and inspections, assessment of these values ??, used methods, and reference standards used for the reference postupy.Nariadenia.Nižšie bornANAGEMENT for the valves, which are detailed in the specification ENEL - in : - ASME B16.34 - MSS SP- 55 - API 600.Ventily must also comply with the requirements of Directive 97/23 / EC on pressure equipment.
Description: Taps, cocks, valves and similar appliances
Authority Type: Utilities
Contact Nature: Supply contract
Procedure: Not applicable
Document: Qualification system without call for competition
Regulation: European Union, with participation by GPA countries
Award criteria: Lowest price
CPV code: 42130000
CPV Description: Taps, cocks, valves and similar appliances.  
Internet address (URL): www.seas.sk
Directive: Classical Directive (2004/17/EC)

Documents

Tender Notice
Login to view

Similar tenders

Slovakia Public Procurement Intelligence

Frequently asked questions

The bid deadline for Taps, cocks, valves and similar appliances was 10 Dec 2015. Bidding is closed.

This tender has been issued by Slovenske elektrarne, a.s., Bratislava in Slovakia.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 42130000 - Taps, cocks, valves and similar appliances.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 2151560. The purchaser document reference is 419835-2014.

See the Similar Tenders section on this page or browse other tenders from Slovakia.

This tender falls under Technology and Equipment in Slovakia. Suppliers in these sectors can track similar Slovakia tenders using CPV-based alerts.