Supplying Safety Masks, Foot Protection, and Gas Tender - 89767048
Tender notice from Lebanon, published on 30 Sep 2023.
Executive Summary
The AMERICAN UNIVERSITY OF BEIRUT has issued a Tender notice for the procurement of a Supplying Safety Masks, Foot Protection, and Gas Detection Kit in the Lebanon. This Tender notice was published on 30 Sep 2023 and is scheduled to close on 12 Oct 2023, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 89767048, while the tender notice number is RFQ-RC-23-14-Safety Masks, Foot Protection, and Gas Detection Kit-Rev 00 and Register on the platform.
Key facts
Summary
Supplying Safety Masks, Foot Protection, and Gas Detection Kit
TOT Ref. No.
89767048
Document Ref. No.
RFQ-RC-23-14-Safety Masks, Foot Protection, and Gas Detection Kit-Rev 00
Quotation are invited for Provision of Supplying Safety Masks, Foot Protection, and Gas Detection Kit. 1. Full Face Mask Medium Size Technical specification as in Appendix C-1
2. Full Face Mask Large Size Technical specification as in Appendix C-1
3. Reusable Half Face Respirator Technical specification as is Appendix D-1
4. Chemical Resistant boots Men Size 9 Technical specification as in Appendix E-1
5. Chemical Resistant boots Men Size 10 Technical specification as in Appendix E-1
6. Chemical Resistant boots Men Size 11 Technical specification as in Appendix E-1
7. Chemical Resistant boots Men Size 13 Technical specification as in Appendix E-1
8. Chemical Resistant boots Women Size 6 Technical specification as in Appendix E-1
9. Chemical Resistant boots Women Size 7.5 Technical specification as in Appendix E-1
10. Combination filter cartridges Provides respiratory protection against organic vapors, chlorine, sulfur dioxide, chlorine dioxide, hydrogen chloride, ammonia, methylamine, formaldehyde, hydrogen fluoride. Hydrogen sulfide respiratory protection for escape only 99.97% efficient filters against solid or liquid particles, including oil-based particles. Suitable for the selected full face mask
11. Anti fog polycarbonate lens/Splash Goggles / soft PVC / elastic head band/ indirect venting protect against liquid and chemical splassh compliant with ANSI Standards
12. Chemical resistant coveralls Medium Coveralls for Hazardous Dry Particulates & Hazardous Moderate Chemical Splash/Spray. provide moderate-chemical splash and spray protect against a range of organic and inorganic acids and bases, solvents, and salts. Light duty, includes hood and boot cover. taped or welded seams. Collared with Elastic/Knit Cuffs and Elastic Ankles.
13. Chemical resistant coveralls Large Coveralls for Hazardous Dry Particulates & Hazardous Moderate Chemical Splash/Spray. provide moderate-chemical splash and spray protect against a range of organic and inorganic acids and bases, solvents, and salts. Light duty, includes hood and boot cover. taped or welded seams. Collared with Elastic/Knit Cuffs and Elastic Ankles
14. Chemical resistant coveralls X-Large Coveralls for Hazardous Dry Particulates & Hazardous Moderate Chemical Splash/Spray. provide moderate-chemical splash and spray protect against a range of organic and inorganic acids and bases, solvents, and salts. Light duty, includes hood and boot cover. taped or welded seams. Collared with Elastic/Knit Cuffs and Elastic Ankles
15. Chemical resistant coveralls 2X-Large Coveralls for Hazardous Dry Particulates & Hazardous Moderate Chemical Splash/Spray. provide moderate-chemical splash and spray protect against a range of organic and inorganic acids and bases, solvents, and salts. Light duty, includes hood and boot cover. taped or welded seams. Collared with Elastic/Knit Cuffs and Elastic Ankles
16. Chemical Resistant glove Medium Neoprene Chemical-Resistant Gloves with Flocked Cotton Liner: flexible, have a high tensile strength, and are resistant to a broad range of oils, acids, alcohols, fats, ketones, caustics, solvents, greases, and petrochemicals. The gloves should have a cotton liner to provide a good sense of touch and absorbs perspiration to keep hands drier longer than unlined gloves, making them more comfortable and easier to put on and take off. Glove thickness: 25 mil. Glove length: 12 in. Compliant with ANSI or EN ISO 374.
17. Chemical Resistant glove Large Neoprene Chemical-Resistant Gloves with Flocked Cotton Liner: flexible, have a high tensile strength, and are resistant to a broad range of oils, acids, alcohols, fats, ketones, caustics, solvents, greases, and petrochemicals. The gloves should have a cotton liner to provide a good sense of touch and absorbs perspiration to keep hands drier longer than unlined gloves, making them more comfortable and easier to put on and take off. Glove thickness: 25 mil. Glove length: 12 in. Compliant with ANSI or EN ISO 374.
18. Chemical Resistant glove X-Large Neoprene Chemical-Resistant Gloves with Flocked Cotton Liner: flexible, have a high tensile strength, and are resistant to a broad range of oils, acids, alcohols, fats, ketones, caustics, solvents, greases, and petrochemicals. The gloves should have a cotton liner to provide a good sense of touch and absorbs perspiration to keep hands drier longer than unlined gloves, making them more comfortable and easier to put on and take off. Glove thickness: 25 mil. Glove length: 12 in. Compliant with ANSI or EN ISO 374.
19. Chemical Resistant glove 2X-Large Neoprene Chemical-Resistant Gloves with Flocked Cotton Liner: flexible, have a high tensile strength, and are resistant to a broad range of oils, acids, alcohols, fats, ketones, caustics, solvents, greases, and petrochemicals. The gloves should have a cotton liner to provide a good sense of touch and absorbs perspiration to keep hands drier longer than unlined gloves, making them more comfortable and easier to put on and take off. Glove thickness: 25 mil. Glove length: 12 in. Compliant with ANSI or EN ISO 374.
20. Gloves (Nitrile) Medium Nitrile Chemical-Resistant Gloves with Cotton/Polyester Liner. Resist oils, grease, hydrocarbons, animal fats, punctures, and abrasion. Have good resistance to acids, some organic solvents, pesticides, and fuel. Cotton/polyester blend liners . Glove thickness: 15 mil. Glove length: 14 in. Compliant with ANSI or EN ISO 374.
21. Gloves (Nitrile) Large Nitrile Chemical-Resistant Gloves with Cotton/Polyester Liner. Resist oils, grease, hydrocarbons, animal fats, punctures, and abrasion. Have good resistance to acids, some organic solvents, pesticides, and fuel. Cotton/polyester blend liners . Glove thickness: 15 mil. Glove length: 14 in. Compliant with ANSI or EN ISO 374.
22. Gloves (Nitrile) X-Large Nitrile Chemical-Resistant Gloves with Cotton/Polyester Liner. Resist oils, grease, hydrocarbons, animal fats, punctures, and abrasion. Have good resistance to acids, some organic solvents, pesticides, and fuel. Cotton/polyester blend liners . Glove thickness: 15 mil. Glove length: 14 in. Compliant with ANSI or EN ISO 374.
23. Gloves (Nitrile) 2X-Large Nitrile Chemical-Resistant Gloves with Cotton/Polyester Liner. Resist oils, grease, hydrocarbons, animal fats, punctures, and abrasion. Have good resistance to acids, some organic solvents, pesticides, and fuel. Cotton/polyester blend liners . Glove thickness: 15 mil. Glove length: 14 in. Compliant with ANSI or EN ISO 374.
24. Dräger HazMat Simultest Kit: The Dräger HazMat Simultest Kit is designed to quickly determine the presence of inorganic and organic gases and vapors. The Simultaneous Test Sets I, II & III consist of five tube sets to detect toxic substances generated from burning combustible materials, flammable liquids or flammable gases and substances evolving from a chemical leak or spill. Includes: accuro® bellows pump with individual tube opener, spare parts, Simultaneous Set I (3 each), Simultaneous Set II (3 each), and Simultaneous Set III (4 each), simultaneous test set opener, 1- meter extension hose with 5-tube adapter, air current kit and laminated instruction cards with full color graphics. A rugged Pelican carrying case protects the kits contents 25. HazMat Spill Kit in 95-Gallon Wheeled Overpack Salvage Drum Overpack drum container UN Rated for shipping waste after spill cleanup wheeled container Lift-out, prepacked baskets speed access and guard contents from UV HazMat Socks and Dikes; HazMat Pads and Pillows X-rated in Packing Groups I, II and III for shipping spill cleanup waste by land, sea or rail Lightweight, polyethylene container Leakproof, twist-on lid Bold "Spill Kit" lettering for quick identification Ledges molded into container Tamperproof seals. BID issuing date 28/09/2023
The bid deadline for Supplying Safety Masks, Foot Protection, and Gas Detection Kit was 12 Oct 2023. Bidding is closed.
This tender has been issued by AMERICAN UNIVERSITY OF BEIRUT in Lebanon.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 89767048. The purchaser document reference is RFQ-RC-23-14-Safety Masks, Foot Protection, and Gas Detection Kit-Rev 00.
Browse other tenders from Lebanon or search by relevant keywords and CPV classification.