Supplying Fast Cycle Surface Pumping Units Tender - 54839596
Tender notice from Jordan, published on 05 Jul 2021.
Executive Summary
The YARMOUK WATER has issued a Tender notice for the procurement of a Supplying Fast Cycle Surface Pumping Units in the Jordan. This Tender notice was published on 05 Jul 2021 and is scheduled to close on 14 Jul 2021, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 54839596, while the tender notice number is C- T- G- 0021-0095 and Register on the platform.
Tenders are invited for Supplying Fast Cycle Surface Pumping Units. Horizontal centrifugal pumping units:
1- Each pump shall be horizontal spindle centrifugal type directly coupled to the driving motor
through flexible coupling, which is to be protected by a coupling guard.
2- Each pump motor unit shall be mounted on a common stiff and robust base plate.
3- The offer shall contain full information regarding the pump and complete original characteristic
curve showing :
a. flow and head
b. power consumption
c. Efficiency, and
d. NPSH.
(A photo copy of the curves will not be accepted and the offer will be rejected)
4- The pump shall be quite in operation, free from vibration and shall be designed for continuous duty.
It shall have stable operating curves and shall be in accordance with the specifications specified
hereinafter.
5- The pump capacity and total dynamic head shall be as stated in the bill of quantities. The pump
shall be able to work under a suction lift below the pump level.
6- The pump efficiency shall not be less than70% for pump.
7- The pump casing should be made of best quality gained cast iron, ductile or cast steel.
8- The impeller shall be constructed of the best quality bronze. They shall be smooth, well finished,
and free from holes and imperfections. Impeller shall be securely fitted to the spindle and in such
manner that they do not loosen or become detached when the pump is in operation or when it is
rotates in the opposite direction be reverse motor connection.
9- The pump shaft shall be stainless steeland fitted with renewable sleeves to protect the shaft.
10- The pump shall be fitted with two Borden pressure gauges connected to the section side and the
discharge side and placed on the pump so as to be easily readable, each gauge shall be provided
with an isolating cock. Each pump should be supplied with low and high pressure switches
including its gaskets, bolts, and nuts. The reading shall be directly in meters of water.
11- All bolts, nuts, studs, screw, washers etc... Shall be stainless steel or cadmium plated steel.
12- Labels and plates shall be non-corrodible metal and rating plates shall be securely screwed or
riveted to each pump or motor casing. These shall be stamped or deeply engraved in such a way
that the lettering will not be obliterated. Rating plates shall include all information required by BS
2613 or BS 4999 or equivalent ISO, in addition to the pump make, impeller size, head and output at
normal duty speed, serial number, pump curve number, power and current.
13- Operating speeds Suppliers shall offer 3000 rpm for all surface pumps
14- Standards and tests - each pump shall be tested over the complete duty range to comply with the
latest BS, ISO, DIN standard specifications for testing of pumps and motors. The bidder shall
submit along with his offer or on the date of agreement original copies in English language of the
relevant standards used in the material, production and testing. Nevertheless the bidder shall
indicate in his offer the standards used. Test certificates however shall be provided.
15- Foundation - the supplier shall give complete details for the set foundation on which the pumping
set will be mounted.
16- Driving motor - each pump shall be equipped with an electric squirrel cage motor, totally enclosed
fan cooled (TEFC). It shall be horizontal foot mounted, construction type B3, according to DIN
42950, and shall be protected against the ingress of splashed water according to ZI.E.C.IP 54, or
equivalent international standards, and shall be in accordance with the following.
1. The nominal supply voltage shall be 3-phase, 400 volts, 50 HZ.
2. The electric motor shall be fitted with graspable ball bearing.
3. The electric motor shall have insulation to class F.
4. The electric motor shall be provided with a terminal box of adequate size for the supply cables.
5. The electric motor shall be continuously rated at least 15% above the maximum power absorbed
by the pump over the complete head and capacity range of the pump.
6. The electric motor shall be provided with inside thermal protection (thermistor bimetal type) to protect the winding against overheating.
7. The electric motor efficiency shall not be less than 94% for those motors above 50 kw, and below these rating supplier shall clearly indicate the maximum performance possible.
(The offer must provide motor efficiency or the offer will be rejected)
17- Product data Suppliers shall identify the manufacturers name and details for motors used on All pumps
18- Operating and maintenance instructions - three copies of the following shall be supplied with each set:
a. operating and maintenance instructions
b. workshop manuals
19- Manufacturers works tests Works tests shall be accompanied by a suitable works test certificate Indicating the performance of the pump over its entire range.
The tests shall be in accordance with ISO 5198 .1998 (Previously class A) Start date of selling documents: 4/7/2021.
Document sale expiry date: 7/13/2021. Last date for inquiries: 7/11/2021.
Last date to deposit: 7/14/2021. [Disclaimer: The above text is machine translated. For accurate information kindly refer the original document.].
The bid deadline for Supplying Fast Cycle Surface Pumping Units was 14 Jul 2021. Bidding is closed.
This tender has been issued by YARMOUK WATER in Jordan.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42122430 - Centrifugal pumps.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 54839596. The purchaser document reference is C- T- G- 0021-0095.