Supply, Installation, Testing and Commissioning Tender - 37912732
Tender notice from UAE, published on 15 Nov 2019.
Executive Summary
The DUBAI ELECTRICITY & WATER AUTHORITY (DEWA) has issued a Tender notice for the procurement of a Supply, Installation, Testing and Commissioning of Deluge Valves including Removal of Existing and Associated Works in the UAE. This Tender notice was published on 15 Nov 2019 and is scheduled to close on 17 Nov 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 37912732, while the tender notice number is 2331902630 and Register on the platform.
Key facts
Summary
Supply, Installation, Testing and Commissioning of Deluge Valves including Removal of Existing and Associated Works
Quotation are invited for Supply, Installation, Testing and Commissioning of Deluge Valves including Removal of Existing and Associated Works. Job1031903602 Replacement. SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF DELUGE VALVES INCLUDING REMOVAL OF EXISTING AND ASSOCIATED WORKS AT LAKE (LAKE) 1 32KV DEWA SUBSTATION SCOPE OF WORK DISMANTLING OF BELOW MENTIONED DELUGE VALVE, ISOLATE VALVES AND TRIM ASSEMBLIES FROM LAKE TRANSP ORTATION THE SAME TO DEWA SCARP YARD. ·#4-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 5 NOS. ·#2.5-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 8 NOS. INSTALLATION OF NEW BELOW DELUGE VALVES SUPPLY BY DEWA, INCLUDING ISOLATION VALVES, TRIM, PRESSURE SWITCH, FITTINGS AND PIPES. ·#4-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 3 NOS. (TRANSFORMER 1, 2, 3) ·#2.5-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 3 NOS. (EARTHING T RANSFORMER 1, 2, 3) SUPPLY, INSTALLATION OF NEW BELOW DELUGE VALVES, INCLUDING ISOLATION VALVES, TRIM, PRESSURE SWITCH, FITTINGS AND PIPES TO BE REPLACED WITH DEWA TP APPROVED DELUGE VALVE MAKES. ·#4-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 2 NOS. (11 KV CABLE BASEMENT 1 & 2) ·#2.5-INCH DELUGE VALVE WITH TRIM ASSEMBLY- 5 NOS. (132 KV CABLE BASEMENT 1 & 2, CAPACITOR BANK 1, 2 &3) NECESSARY MODIFICATI ONS IN MANIFOLD AS REQUIRED BY SITE CONDITION. CONNECTION AND TESTING OF EXISTING DELUGE ALARM PRESSURE SWITCHES. PAINTING OF DELUGE VALVE AND MANIFOLD AS PER DEWA SPECIFICATIONS. ALL DELUGE VALVES TO BE TESTED AS PER DEWA REQUIREMENTS DISCHARGE TEST NOT REQUIRED. WARRANTY FOR 1 YEAR TO BE GIVEN FOR INSTALLATION AND ANY NEW MATERIAL USED IN THE PROJECT. SHIFTING OF SCRAP ITEMS TO DEWA SCRAPYAR D WILL BE CONTRACTOR SCOPE. ALL NECESSARY PTW, NOC WILL BE CONTRACTOR SCOPE. ALL TOOLS, LIFTING EQUIPMENT, SCAFFOLDING, LADDERS AND TESTING EQUIPMENT REQUIRED FOR THE JOB IS CONTRACTOR SCOPE. CONTRACTOR TO VISIT DEWA ALWARSAN CENTRAL STORE TO CHECK THE AVAILABLE M ATERIALS SUPPLY BY DEWA. CONTRACTOR TO ENSURE THAT MATERIALS PROVIDED BY DEWA TO BE EXTRACTED FROM THE QUOTATION. CONTRACTOR MUST FO LLOW ALWAYS DEWA SAFETY RULES AND MUST COMPLY WITH ANY OUTAGE REQUIREMENTS IF REQUIRED FOR THE PROJECT. CONTRACTOR MUST FOLLOW DEWA OUTAGE SCHEDULES WHEREVER APPLICABLE, DURING THE EXECUTION OF JOB. CONTRACTOR MUST FOLLOW ALL DEWA SAFETY RULES AND FORMALITIES DUR ING THE EXECUTION OF THE JOB. CONTRACTOR TO COMPLETE THE EXECUTION IN PERIOD OF 6 MOTHS. CONTRACTOR SHALL ACCEPT FULL RESPONSIBILITY FOR ANY DAMAGE THAT MAY BE CAUSED TO ANY PLANTS DUE TO NEGLIGENCE. PIPES AND FITTINGS: STANDARD WEIGHT STEEL PIPE ASTM A53, SEAM LESS, SCHEDULE-40, FACTORY GALVANIZED.# ALL THE PIPING OF SIZE 2" DIA& BELOW SHALL BE THREADED TYPE & MILL GALVANIZED, AND 2.5" DIA& ABOVE SHALL BE HOP DIP GALVANIZED AFTER FABRICATION & WELDING. ALL FITTINGS AND FIXTURES FOR PIPE WORK SHALL BE OF SEAMLESS CARBON STEEL SCHEDULE 40, HOT DIPPED GALVANIZED AND PAINTED TO COLOR RED. USE OF WELDED JOINTS WITH GALVANIZED STEEL PIPES NOT ACCEPTABLE. DEWA TP APPROVED PIPES AND FITTINGS. PAINTING ALL SURFACES OF PIPES AND FITTINGS SHOULD BE CLEAN, DRY AND FREE FROM CONTAMINATION PAINTING SHALL BE DONE AS PER PAINT MANUFACTURER#S SPECIFICATION. TWO COAT OF RED OXIDE AND TWO COAT OF GLOSS RED PAINT BY MIXING W ITH PROPER RATIO OF BASE AND CURING AGENT WITH THINNER. EXPOSED PIPE WORK SHALL ADDITIONALLY BE PAINTED ONE COAT GLOSS RED. SPECIFIC ATION AND METHOD STATEMENT FROM PAINT MANUFACTURER SHALL BE SUBMITTED FOR DEWA APPROVAL FLUSHING ALL PIPE WORKS INSTALLED UNDER T HIS CONTRACT SHALL BE THOROUGHLY FLUSHED WITH WATER IN ORDER TO REMOVE FOREIGN MATER. GENERAL THE CONTRACTOR SHALL SUBMIT TECHNICAL OFFER WITH FULL DETAILED WORKING PROGRAM TO EXECUTE THIS JOB. THE CONTRACTOR MUST COMPLETE THE EXECUTION OF THE PROJECT WITH 6 MONT HS PERIOD. THIS WORK PLAN PROGRAM SHALL INCLUDE BUT NOT LIMITED TO THE FOLLOWINGS: O#MATERIAL SUBMITTALS O#INSTALLATION O#COMMISSIO NING DATE O#SYSTEM HAND OVER DATE O#ONE-YEAR WARRANTY CERTIFICATE FOR THE SUPPLIED MATERIAL AND INSTALLATION. FOR MORE DETAILS, CON TACT ENG. REEM (0502272767) FOR SITE VISIT ENG. SHERIEF (0529219010), Qty 1. STANDARD TERMS & CONDITIONS
1) Prices should be 'DDP' delivery duty paid at DEWA stores.
2) Quotation to be submitted only in local currency U.A.E Dirhams
3) DEWA Standard payment terms is '30 days credit' from the date of acceptance of material
4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest.
The bid deadline for Supply, Installation, Testing and Commissioning of Deluge Valves including Removal of Existing and Associated Works was 17 Nov 2019. Bidding is closed.
This tender has been issued by DUBAI ELECTRICITY & WATER AUTHORITY (DEWA) in UAE.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 31711400 - Valves and tubes.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 37912732. The purchaser document reference is 2331902630.
Browse other tenders from UAE or search by relevant keywords and CPV classification.
This tender falls under Defence and Security in UAE. Suppliers in these sectors can track similar UAE tenders using CPV-based alerts.