Supply & Install Electrical Generator Tender in Iraq - 79714138

Request for proposals are invited for Supply & Install Electrical Generator in Telkief / Ninawa Gov
1 Supply 45 KVA Generator, 3 cylinders, turbocharge engine. No. 1

2 Supply galvanized aluminum fuel tank 1500 Liter No. 1

3 Supply Generator Board No. 1 5 Supply & Install Sun shed (cage) LS 1 6 Fire extinguisher type ABCD of 12 Kg. Pcs 2
Supply electrical generator of Prime Capacity 45KVA with below technical specifications:

• voltage 230/380V - 50Hz

• 3 cylinders

• turbocharged engine.

• Please provide in your technical proposal details of the engine, the alternator, and the compact

soundproof canopy with %70.

2. Supply galvanized aluminum Fuel tank capacity 1500 liter: This work includes all the connection

from the tank to the generator by using all required fittings in addition to fuel filter from tank toward the

generator,

3. Supply Generator Board: panel board size 100*80, 3 contactors of 100 amp for each, 3 circuit

breakers of 100 amp 3 phases, 6 of indication lamp ATS, 3 timer, 2 relay, bus bar for outlets of circuit

breakers, circuit breaker 1 phase for control, 3 gauges 5-50 for AMP to measure the provided power during

the operation, CT 3 pcs, Voltage gauge 1 pcs, Single Secret 2 AMP 3 pcs, Single Phase wire 0.5mm 20m,

terminal 3 pcs, non-armored cable size 16mm* 4 core of 25 meter from generator to office building.

4. Supply & Install Sun shed (cage) & fire extinguisher: supply materials and manpower to construct

new steel sun shed 4.5*4 m dimensions 3m Hight for the generator, use the following steel sections.

• 8 columns of rectangular steel section (4x4) inches 2mm thickness 3m height. The columns should

have bottom end of steel plate (footpad) 10x10 cm 3mm thickness to connect to the ground by

Revit bolts (4 bolts/column).

• Bottom ring: use equal angled steel section of (2x2) inches 2mm thickness to connect the columns

bottom ends together for all sides of the sun shed.

• Top ring: use equal angled steel section of (2x2) inches 2mm thickness to connect the columns top

ends together for all sides of the sun shed.

• Steel rafters: use 5 rectangular steel section (8x4) inches 2mm thickness.

• For roofing: use corrugated steel plate gauge 0.6mm. keep 1% slope for roofing.

• BRC sided: use 8x8cm 6mm diameter BRC mesh for all sides of the sun shed.

• 1.2x2.2m Steel door: use 8x8cm 6mm diameter BRC mesh with exterior frame of equal angled

steel section of (2x2) inches 2mm thickness and interior frame of rectangular steel section (3x2)

inches 2mm thickness. Item include providing lock.

• Fire extinguisher: 2 ceiling mounted fire extinguisher to install above the generator