Supply and Delivery of Tools & Plants Tender in Bhutan - 66653895
Tender notice from Bhutan, published on 20 May 2022.
Executive Summary
The DRUK GREEN POWER CORPORATION LIMITED has issued a Tender notice for the procurement of a Supply and Delivery of Tools & Plants in the Bhutan. This Tender notice was published on 20 May 2022 and is scheduled to close on 27 May 2022, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 66653895, while the tender notice number is MMD0059/2022 and Register on the platform.
Tenders are invited for Supply and Delivery of Tools & Plants 1 10000000438 COTPHTDT Sickle with handle 83 NO
2 10000000442 COTPHTDT Crow bar, 25mm dia 10 NO
3 10000000443 COTPHTDT Crow bar, 32mm dia 3 NO
4 10000000445 COTPHTDT Chisel - 34- 10 NO
5 10000000447 COTPHTDT Chisel -1" 15 NO
6 10000000448 COTPHTDT Chisel flat, 134- 14 NO
7 10000000452 COTPHTDT Mason trowel, steel float, (240xioo)mm 10 NO
8 10000000453 COTPHTDT Mason trowel (big) 18 NO
9 10000000458 COTPMIMT Measuring tape (steel), 5 mtr. 36 NO
14 10000000699 COTPMIMT Measuring tape 30M 15 NO
15 10000000815 COTPHTDT Knife (Patang) 13 NO
16 10000000916 COTPHTDT Trowel medium 10 NO
17 10000000917 COTPHTDT Trowel small 10 NO
18 10000000919 COTPHTDT Crowbar-4omm 2 NO
19 10000001004 COTPHTDT Axe with handle 11 NO
20 10000001055 COTPMIMT PVC Measuring tape(iooM) 1 NO
21 10000001259 COTPHTDT Tri square 3 NO
22 10000001547 COTPGTGT Soldering Iron, 100W, 230 V 1 SET
23 10000001784 COTPMIMT Measuring tape 5mtr. with spirit level 36 NO
28 10000002097 COTPMIMT Measuring tape(fabric glass), 50 mtr. 2 NO
29 10000003233 COTPMIMT Measuring tape (steel), 50m 1 NO
30 20000000625 TPMTPT Hand operated pressure testing kit, provided with manual pump, pressure range: upto 7okg/cm2, Suction per stroke: 1.8 inch/45ml, connecting inch: R1/2, Hose pipe: water resistance 1.0 to 1.5M length, dimensions:(26x7xio)", container volume:20-3oL Appro., Container Make: Firm steel & low temperature resistant, total weight: 8-gkgs. 1 NO
31 20000000632 TPMTCU Dial gauge, 0.01 to 5 mm 6 NO
32 20000000634 TPMTCU Dial indicator 2046F, with magnetic base 701S-10 16 NO
35 20000000680 TPMTMR Hydrometer, Digital, Portable, Min measurement range o- 2000 Kg/cu.m. 2 NO
36 20000000728 TPPPDM Drilling machine, light duty, 4-iomm dia 1 SET
37 20000000747 TPPPCM Portable angle grinder, 125 mm 2 NO
38 20000000875 TPTLSP Ring Spanner set, 6 to 32 mm 2 SET
39 20000000949 TPPPCM Portable angle grinder, 100 mm. (Technical specifications attached at Annexure-ll) 7 NO
40 20000000971 TPMTVC Vernier calliper, dial type, 0-300 mm 1 NO
41 20000000972 SF»TVC Absolute Digital Vernier Caliper, 0150m LC 0.01 2 NO
44
20000001794
TPMTOS
Digital storage oscilloscope
100 MHz, with built-in
printer with the following
minimum features: 1. To
measure the standard
waveforms of Sine, Square,
Triangle, ramp (up/down),
sin (x)/x, Gaussian, half
sine, noise, DC 2. No. of
identical channel: 4
channels plus external
trigger 3. Sampling rate:
Minimum iGS/s. 4.
Resolution: Minimum 8-
bits 5. Having cursor to
automatically measures
and display the value of
period, frequency, cycles
RMS, mean, average, peak
to peak 6. Auxiliary power
supply: 220 250V AC, 50Hz
7. Having adjustable ranges
for volt/division and
time/division 8. Bandwith:
100 MHz 9. Having save
and recall facility 10. Having
hold and storage facility 11.
Having a facility to adjust
.the intensity
45 20000001797 TPMTBC Portable battery charger 50 Hz, IP:220-250VAC, Ouput Voltage: 0 • 24V DC variable to drive upto 50 Amperes The charger will be used for charging the Valve Regulated Lead Acid batteries Battery clamps included. 1 NO
46 20000002202 TPMTMR Digital multimeter, model: MAS830L 1 NO
47 20000002221 TPPPDM Demolition hammer, model no. H60 MRV 1 NO
48 20000002646 TPMTME Megger MIT-525 5kV 1 NO
49 20000002852 TPMTMI PULLALIGN set with case. LASER based alignment kit. 1 NO
50 20000002907 TPMTVT Three Phase Auto Transformer (Variac). (Technical Specifications attached as Annexure-lll) 1 NO
63 20000005207 TPMTMI Dry Block Calibrator (Technical Specifications attached at Annexure-V). 1 NO
64 20000005232 TPRDOT Handheld Density Meter, Densito "Measurement range (g/cmJ) = 0 g/cm3 - 3 g/cm3 Accuracy ♦ (g/cm*) = 0.001 g/cm3 Repeatability (g/cm*) = 0.0005 Resolution (g/cm*) = 0.0001 g/cm3 Sample Temperature Range = -10 °C - 50 °C Minimum sample volume = 2.00 mL (2 mL) Display = 2.4"" color screen Display / User interface = 2.4"" color screen, buttons and joystick PC Software = EasyDirect Density and Refractometry PC Software Power= Lithium ion battery; Rechargable and removable battery" 1 NO
68 8000000482 TPPPDMDB HSS Drill bits (set of 8)mm 3 NO
6g 8000000487 TPPPDMDB HSS Drill bit, M6 2 NO
70 8000000488 TPPPDMDB HSS Drill bit, M8 2 NO
71 8000000510 TPPPDMDB HSS Taper shank drill bit, 6 to 30 mm 1 SET
72 8000000554 TPPPDMDB Concrete drill bit • 3 to 12mm • 6Nos with slotted shank and the approved brand 3 SET
73 8000000578 TPPPCMAC Grinding Stone, 4ommX8o Grit 20 NO
The bid deadline for Supply and Delivery of Tools & Plants was 27 May 2022. Bidding is closed.
This tender has been issued by DRUK GREEN POWER CORPORATION LIMITED in Bhutan.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42610000 - Machine tools operated by laser and machining centres.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 66653895. The purchaser document reference is MMD0059/2022.