Expired Tender USA ICB TOT Ref. 35836038

Repair and Maintenance Service for Sciaky Electron Tender - 35836038

Tender notice from USA, published on 28 Aug 2019.

Executive Summary

The NATIONAL AERONAUTICS AND SPACE ADMINISTRATION has issued a Tender notice for the procurement of a Repair and Maintenance Service for Sciaky Electron Beam Welder in the USA. This Tender notice was published on 28 Aug 2019 and is scheduled to close on 02 Sep 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 35836038, while the tender notice number is 80NSSC19Q1143 and Register on the platform.

Key facts

Summary
Repair and Maintenance Service for Sciaky Electron Beam Welder
TOT Ref. No.
35836038
Document Ref. No.
80NSSC19Q1143
Country
USA
Notice type
Tender
Competition
ICB
Publication date
28 Aug 2019
Bid deadline
02 Sep 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Repair and Maintenance Service for Sciaky Electron Beam Welder
Place of Performance .: Langley Research CenterHampton, Virginia 23681 United States
Classification Code:J -- Maintenance, repair & rebuilding of equipment
NAICS Code:811 -- Repair and Maintenance/811310 -- Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Notice Type :Combined Synopsis/Solicitation
Response Date :Sep 02, 2019 1:00 pm Eastern
Archive Date :September 17, 2019
Synopsis: Repair and Maintenance Service for Sciaky Electron Beam WelderPreventative and corrective maintenance services are requested for a Sciaky Electron Beam Welder, Model VX.4-108x78x100 W200, S/N 11629. At a minimum, this shall include the following:Preventive Maintenance:The contractor shall perform the following services to verify the system is within factory performance specifications. Corrective action shall be taken (or identified for follow-on service if necessary) on any items found to be out of tolerance to bring within factory performance specifications. • Vacuum System:o Inspect vacuum chamber and feedthrough conditiono Inspect vacuum chamber door seal and positionero Check holding, roughing and high vacuum pump operationo Check operation of vacuum pump valves and vacuum gauging systemo Check all vacuum pump oil levelso Check diffusion pump heaters and water coolingo Evaluate roughing time and high vacuum pumpdown cycle timeso Evaluate vacuum chamber leakup rate• High Voltage System:o Check high voltage (HV) transformer oil levelo Inspect all HV cables and connections o Check water cooling system connections and performance o Inspect and clean all electronics cabinet cooling units and fans as neededo Calibrate filament, bias, accelerating voltage, beam focus, and beam deflection power supplies to +/-1%• Control and Safety Systems:o Check user interface operation and displayso Inspect all computer system error displays, power supplies and cooling fanso Calibrate all system feedback displays within +/- 1%o Inspect all I/O rack power supplies and cableso Inspect and calibrate all D/A converters within +/- 1%o Check proper function of A/D converterso Check high voltage tank safety interlockso Check vacuum chamber internal safety interlockso Inspect all radiation shielding • Electron Beam Gun:o Check condition of EB gun, filament holder and cableso Check proper operation of beam focus and deflection coils• Positioner and Motor Drive Systems:o Inspect condition all linear and rotary positioner drive system componentso Check and lubricate ballscrews and linear motion rails as requiredo Inspect and lubricate Z-axis ram sealso Check condition and operation of all servo motors and drivesCorrective maintenance:The contractor shall perform corrective maintenance on the following ...

Documents

Tender Notice
Login to view

USA Public Procurement Intelligence

Frequently asked questions

The bid deadline for Repair and Maintenance Service for Sciaky Electron Beam Welder was 02 Sep 2019. Bidding is closed.

This tender has been issued by NATIONAL AERONAUTICS AND SPACE ADMINISTRATION in USA.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 35836038. The purchaser document reference is 80NSSC19Q1143.

Browse other tenders from USA or search by relevant keywords and CPV classification.