Repair and maintenance of plant Tender in Slovakia - 2111914
Tender notice from Slovakia, published on 04 Dec 2014.
Executive Summary
The Slovenske elektrarne, a.s., Bratislava has issued a Tender notice for the procurement of a Repair and maintenance of plant in the Slovakia. This Tender notice was published on 04 Dec 2014 and is scheduled to close on 04 Dec 2015, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 2111914, while the tender notice number is 412512-2014 and Register on the platform.
Object of the contract Short description of the material skupiny.Predmety contracts, the implementation of which suppliers qualify are : Maintenance and locksmith work ( services ) for pressure vessels and heat exchangers in nuclear and conventional power plants : - primary okruh.Parogenerátory, accumulator, pressurizer, cooler sprinkler system, MCP oil coolers, oil coolers pump parts, cooler storage pooltion of fuel, the intermediate cooler pumps, storage tanks, coolers blowdown, steam expanders, ion exchangers, heat exchangers, evaporators condensers, pressurized air tanks, heat exchangers for DGS, ion exchangers, water heaters, heat exchangers, storage tanks, power nádržeRealizácia subject of the contract will include a) preparation for inspection of pressure vessels and heat exchangers N and VT opening prieLezová containers, lids exchanger cleaning removal of fasteners, sealing surfaces of the flanges and covers manufacture seals for closure of vessels and exchangers sealing vessels and heat exchangers; b ) repair of pressure vessels and heat exchangers cleaning the internal surface of pressure vessels including accessories repair sealing surfaces by mechanical machining and repair welds basic material cutting and welding; c) Removal of weld defects on pressure vessels and heat exchangers using the following welding technologies carried out in a vertical ( PC ) and horizontal (PF ) position : carbon steel inbox. 11416.1 and 12 021.1 welding coated electrode ( 111 ) shielded welding argon TIG ( 141 ) stainless austenitic steels inbox. 17 248.4 shielded welding argon TIG( 141 ).Tlakové vessels and heat exchangers are defined by Decree no. 508/2009 Coll. such equipment pressure - group A letter " b " and the group B letter "a " and " b ".Údržbárske and welding operations and services ( production of new welds at replacement or installation of new pipe parts and supports and errors of existing welds ) for the following piping systems - walled entubných systems with diameters DN 10 to DN 1800 from steels of grades. 1.1 according to CR ISO 15608 - the piping system feedwater to the steam generators diameter DN 25 to DN 250, with a maximum working pressure of 7 bar of steel Gr. 1.1 according to CR ISO 15608 - the live steam pipe system with a diameter of DN 10 to DN 500 with a maximum pressure of 4.6 MPa, the steel Gr. 1.1 according to CR ISO 15608 - walled auxiliary pipes systems of the primary circuit with diameters DN 10 to DN 600, made ??of steel Gr. 8 according to CR ISO 15608 - the thick-walled pipe systems of the primary circuit with diameters DN 15 to DN 500, with a maximum working pressure of 12.5 MPa, the steel Gr. 8 according to CR ISO 15608 components with heterogeneous welds of steel Gr. 1.1 + 8 4 8 + 5 + 6 + 8 and 8 according to CR ISO 15608, - contact surfaces and technological equipment surfaces of steeldivided sk. 1.1, 4, 5, 6, 7, 8 according to CR ISO 15608, - the feed water pipe system with a diameter of DN 100, with a maximum working pressure of 25 MPa, the steel Gr. 1.1 according to CR ISO 15608, the live steam pipe system with a diameter of DN 10 to DN 273 with a maximum pressure of 13.6 MPa, the steel Gr. 6 according to CR ISO 15608 - the reheated steam pipe system with a diameter of DN 10 to DN 377 with a maximum pressure of 3.2 MPa, of steel Gr. 6 according to CR ISO 15608.Pri performance of work is necessary to use one of the following technologies : coated electrode welding ( 111 according to EN 24063 ), welding tungsten inert gas ( 141 according to EN 24063 ), welding consumable electrode gas-shielded ( 131, 135, 136, 137 according to EN 24063 ) to steam ( 141 according to EN 24063 ), filling and coating, weldinge coated electrode ( 111 according to EN 24063.Potrubné systems are defined by Decree no. 508/2009 Coll. as equipment pressure - group A letter " e", group B letter " e, 1.2 " will.Dodávate? work carried out by one of the following methods : working groups led by customer ''s technical supervision of the Customer on the basis of technological procedures and technical documentation withE asSamostatne comprehensively based on the submitted project documentation, as and own technological procedures and work practices zvárania.V if the performance of the contract will be performed in a controlled area of nuclear power plants, a condition of the contract with the qualified successful tenderer will submit the following certificates for all skilled workers - certificate ozH EALTH, mental competence and integrity within the meaning of. no. 541/2004 Coll. on the Peaceful Uses of Nuclear Energy (Atomic Act ) § 26. 5 - proof of integrity - valid criminal records not older than 3 months - proof of medical fitness - a medical certificate issued by a doctor who is authorized to issue such certificates - proof of mental fitness - confirmation of percPrecise completed psychological tests, psychological department issued, authorized to issue such certificates - certificate of competence according to Law no. 355/2007 Coll. as amended by the Protection and Promotion of Public Health in accordance with § 15. 1 point. c ), d ), e ) in accordance with § 45 of the Act required the first category of nuclear power - primary okruh.V if the person to beprovide subject qualification system are in SE, as provided and applicable inputs for which corroborated the necessary training to work in NPP issued VÚJE, integrity, health and mental capacity, it is not necessary to submit the following documents repeatedly. Description: Repair and maintenance of plant Authority Type: Utilities Contact Nature: Works Procedure: Not applicable Document: Qualification system without call for competition Regulation: European Union, with participation by GPA countries Award criteria: Lowest price CPV code: 45259000, 45262680, 50530000 CPV Description: Repair and maintenance of plant.   Welding.   Repair and maintenance services of machinery.   Internet address (URL): www.seas.sk Directive: Classical Directive (2004/17/EC)
The bid deadline for Repair and maintenance of plant was 04 Dec 2015. Bidding is closed.
This tender has been issued by Slovenske elektrarne, a.s., Bratislava in Slovakia.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 45259000 - Repair and maintenance of plant, 45262680 - Welding, 50530000 - Repair and maintenance services of machinery.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 2111914. The purchaser document reference is 412512-2014.
This tender falls under Construction and Real Estate, Defence and Security in Slovakia. Suppliers in these sectors can track similar Slovakia tenders using CPV-based alerts.