Cross Icon
Cross Icon

Renovations of Doctor Houses Tender in Namibia - 45907490

The MINISTRY OF HEALTH AND SOCIAL SERVICES has issued a Tender notice for the procurement of a Renovations of Doctor Houses in the Namibia. This Tender notice was published on 21 Sep 2020 and is scheduled to close on 25 Sep 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 45907490, while the tender notice number is and Registering on the platform.

Expired Tender

Procurement Summary

Country: Namibia

Summary: Renovations of Doctor Houses

Deadline: 25 Sep 2020

Posting Date: 21 Sep 2020

Other Information

Notice Type: Tender

TOT Ref.No.: 45907490

Document Ref. No.:

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

CPV Classification

45211100 - Construction work for houses

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Procurement of Renovations of Doctor Houses in Grootfontein Hospital in Otjozondjupa Region
0000.01 bill No 1 (Volume 3)

Demolitions and alterations

0005. 01 1. Prices for the demolition of brick walls must allow for the demolition and removal of

small isolated beams and lintels occurring therein over openings.

2. The areas of brickwork to be demolished exclude the areas of opening in walls.

3. Prices for the demolition of brick or concrete walls, concrete surface beds columns, slabs and

the like must allow and include for the demolition of plastered or screened surfaces and other

finishes related thereto as NO separate measurement or payment will be Meade in this regard.

4. Prices for the demolition of concrete must allow for the cutting up and removal of any steel

reinforced in the concrete.

5. The contractor must ensure the stability of adjoining walls and structure during the demolition

of any concrete and/ or brickwork and must provide and install any necessary propping that may

be necessary to ensure such stability and prices must allow here for.

concrete or brickwork and preparing surfaces for new screeds, plaster, tiling, etc. (elsewhere

measured)

0020.00 creaming floor or wall tiles 2.00

Bill total

0020.01 taking up and removing vinyl floor coverings, carpeting, etc. from screed surface to be

removed.

0021.00 Vinyl tile, sheet vinyl or similar floor covering 155.00 m2

Bill total:

0048.01 Taking down and removing ceilings, etc.

005.00 Soft board or gypsum ceilings including cover strips and cornices 6.00m2

0099.01 Takings out and removing sundry ironmongery item, etc.

0101.00 door locks, handles, hinges, door number plates, kicking plats, flush bolts, barrel

3.00 NO

Bill total:

0106.01 Taking out and removing joinery fitting and the like

0110.00 kitchen cupboard units and counters with cupboards under not exceeding 900mm high
milggm

0048.01 Taking down and removing ceilings, etc.

005.00 Soft board or gypsum ceilings including cover strips and cornices 6.00m2

0099.01 Takings out and removing sundry ironmongery item, etc.

0101.00 door locks, handles, hinges, door number plates, kicking plats, flush bolts, barrel

3.00 NO

Bill total:

0106.01 Taking out and removing joinery fitting and the like

0110.00 kitchen cupboard units and counters with cupboards under not exceeding 900mm high

1.80m

Bill total:

0115.01 taking out and removing sanitary fittings and appliances, including taps and traps,

including disconnecting piping from fitting and cutting back and scaling off all water and waste

pipes as necessary.

0116.00 pillar tap. Bib tap or angle valve 7.00 NO

0117.01 taking out and removing sanitary fittings and appliances, including taps and traps,

including disconnecting piping from fittings and cutting back and sealing of all water and waste

pipes as necessary.

0118.00 stainless steel or earthenware wash hand basin 2.00 NO

Bill total

0120.00 stainless steel or earthenware w.c.suitc, drip sink or slop hopper with cistern and flush

pipe 1.00 NO

Bill total:

0124.00 Shower set comprising shower rose and under wall slop cocks 2.00NO

Bill total:

0165.01 bill no 2 (Volume 3)

General repairs to existing work

0179.01 repairs and sundries to existing roof covering

0179.03 1. Prices must allow for the replacing of existing roofing drive screws and washers or

hook bolts as may be necessary. 2. Holes and roofing screws arc to be scaled with klodek

waterproofing membrane. The waterproofing membrane sealing holes and roofing screws is to

be a minimum size 75x75 x. 3. Apply one coat primer diluted with 25% water, one full

undiluted primer coat, and one layer of waterproofing membrane and three finishing coats all as

specified and in accordance with the manufacturer`s instructions.

0181.00 Seal all ridges, hip capping, valleys, side laps, end laps side flashings, etc. not exceeding

300mm wide or girth (measured on flat) 210.00 m

0362.01 bill No 4

Paint work

0362.02 paintwork to previously painted and plastered or screened surface

0378.01 clean down and prepare and one coat sealer and two coats marble plaster textured paint

coating.

0388.00 On internal smooth plastered walls and columns 420.00 m2

Bill total:

0399.01 On Soft board, ETC

0399.02 clean down and prepare and one coat exterior quality PVA paint.

0400.00 On ceilings, including cornices and cover strips 155.00 m2

Bill total:

0410.01 On Mental

0410.02 clean down and prepare and one coat gloss enamel paint

0411.00 On door frames 12.00 m2

BUI Total:

0425.01 On Wood

0425.02 clean down and prepare and one coat clear matt polyurethane varnish

0427.00 On flush doors 32.00 m2

0889.01 Bill NO 12

Joinery work

0894.01 General Joinery, Shelving, etc.

0935.01 particle board to SABA 1300 with decorative melamine impregnated paper both sides

23.00 m2

0936.00 16mm End, divisions, tops, sides, etc.

Bill Total:

0942.01 Kitchen Cupboards

0946.01 Floor Units (work tops elsewhere measured)

0955.00 Floor sink unit type FI800 S size 1800mm long, 870mm high and 570mm deep with

fixed front fascia, four doors and shelves 1.00NO

Bill total:

0960.02 works tops generally

0960.02 32 work tops with post formed front edges

0961.00 work top 600mm wide 1.80mm

Bill total 14

1042.01 Floor c

1042.021

1044.01 300 x300 x2 mm fully flexible vinyl tiles to patterns in differing colours fixed with and

adhesive recommended by laid in strict. Accordance with the manufacturer-s instructions

1045.00 floors

155.00 m2

Bj.lljo.tal

1077.01 bill no 15

Ironmongery

1077.01 hangers

1094.00 110 Chromium plated self-closing cupboard door hinge 20.00 NO

Bill Total

1114.01 Handle, etc

1116.00 75mm Sat in Chrome Plated Bow Handle 5.00 No

Bill Total:

1118.01 Door Locks

1130.01 Cylinder Locks

1132.00 Oval single cylinder lock with oval profile locks case and brass fbrend 3.00 NO

Dill total

1171.01 bathroom lutings

1177.00 20mm chromium plated shower curtain rail 900mm long including end flange brackets

3.00

Bill Total;

Bill no 19

Tilling

1531.02 wall Tilling

1531.03 152x152x5mm thick white glazed ceramic wall tiles fixed adhesive to plaster

(elsewhere measured) and flush pointed with an approved cement based grout to 2.00 M2

1532.00 walls

1539.02

Take deliver)` of, transport to the site, store, protect and lay ceramic floor tiles fixed with and

including adhesive to screened surface (elsewhere measured) and flush pointed with an approved

tinted waterproof jointing compound on (cost of floor tiles elsewhere)

1540.00 floors to patterns 155.00m2

Bill total

1558.01 bill no 20

1593.01 sanitary fittings

1604.01 white vitreous china glazes fireclay

1605.00 basin size 510x405mm with two tap holes bolted to walls 2.00 No

Bill total

1611.00 Low level w.c suite comprising wash down pan, matching 9 litre low level cistern with

lid and fitments, flush pipe and heavy duty double flap and seat to wall and floor 1.00

1236.01 kitchen cupboards

1236.02 standard steel epoxy powder coated kitchen cupboard units

1244.00 floor cabined type FC900 x 533 x 865 mm high 1.00 NO

Bill total:

Sink cabinet type SC 1200 x 533 x865 mm high 1.00 NO

844.00 door size 813 x 2032mm high 5.00 NO

Bill total

0849.01 framed doors and fanlights

0849.02 wrot Meranti

0853.00 44mm framed, ledge, braced and battened door size 813 x2032mm high formed of

44x108mm

Stiles and top rail, 22x 108mm middle ledge, 22x228mm bottom ledge and 22x108mm diagonal

braces and filled in with 22mm tongucd, grooved and v-jointed vertical boarding in narrow

matched widths. 2.00

Bill total

0965.01 bill no 13

Ceilings and partitions

Documents

 Tender Notice


Similar Tenders

Request Demo
GiZ Tenders India

Procurement Documents for Namibia

Access a comprehensive library of standard procurement documents specific to Namibia. Here, you'll find all the essential forms, guidelines, and templates required for tender applications and submissions in Namibia

Explore Procurement Documents for Namibia


Want To Bid in This Tender?

Get Local Agent Support in Namibia and 60 More Countries.

View All The Services


View Tenders By


Publish Tenders


Have Any Dispute With The Purchaser?