Expired Tender Hong Kong ICB TOT Ref. 5390422

Renovation Works for Workshops and Laboratories Tender - 5390422

Tender notice from Hong Kong, published on 20 Feb 2016.

Executive Summary

The HONG KONG PRODUCTIVITY COUNCIL has issued a Tender notice for the procurement of a Renovation Works for Workshops and Laboratories in the Hong Kong. This Tender notice was published on 20 Feb 2016 and is scheduled to close on 15 Mar 2016, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 5390422, while the tender notice number is HA00103 and Register on the platform.

Key facts

Summary
Renovation Works for Workshops and Laboratories
TOT Ref. No.
5390422
Document Ref. No.
HA00103
Country
Hong Kong
Notice type
Tender
Competition
ICB
Publication date
20 Feb 2016
Bid deadline
15 Mar 2016
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Renovation Works for Workshops and Laboratories Areas at lg2/F of Hong Kong Productivity Council Building.
High Precision Coating Laboratory
Descriptions Appendix I &
Scopes of works/services 4(a) Summary -
1 Demolishing works - -
2 Industrial compressed air pipework-s installation &
modification works
3 Industrial chilled water pipework-s modification works 4(a) Drawing Item 2
4 Install a Fan Coil Unit as 24 hours air conditioning
supply
5 Floor Epoxy Coating System 4(a) Drawing Item 4
6 Electrical supply installation & modification works 4(a) Drawing Item 5 & 9
7 Pipework and its fitting installation & modification for
Fresh water supply; and
Drainage;
Furniture:
Storage gas cylinder cabinet supply and installation;
Stainless steel work bench supply and installation;
10 Industrial machine exhaust & filter installation and
modification works
Builder works:
Installation of false ceiling system;
Replacement of Wooden Doors & frames;
Installation of Tempered glass door
14 Installation of conduits for access door control system 4(a) Drawing Item 14
15 Pipeworks and ports Installation for
Telephone; and
network
16 Installation supporting for the DLC machine 4(a) Drawing Item 20
4.a) High Precision Coating Laboratory
Descriptions Appendix I &
Scopes of works/services 4(a) Summary -
17 To perform the works for fulfilling general requirements
of Building Services Installation
Lighting;
Fire Service Installations included but not limited to
adopt sprinkler system and install a Fire Extinguisher(s);
Air Conditioning & ventilation included but not limited
to modify / cut-off the fresh air ductworks;
Emergency Public Address;
18 The finishing of partition walls / entrance doors will be
carried out only after the heavy machines, if any, are
installed inside the appointed positions.
4.b) Ion Plating Laboratory
Descriptions Appendix II &
Scopes of works/services 4(b) Summary -
1 Partition wall installation works 4(b) Drawing Item 1
2 To perform the works for fulfilling general requirements
of Building Services Installation
Lighting;
Fire Services Installations;
Air Conditioning & ventilation;
Emergency Public Address;
3 The finishing of partition walls / entrance doors will be
carried out only after the heavy machines, if any, are
installed inside the appointed positions.
4.c) Turn Key Equipment Assembly Workshop
Descriptions Appendix III &
Scopes of works/services 4(c) Summary -
1 Supply and install 4 sets storage racks 4(c) Drawing Item 1
2 Floor Epoxy Coating System 4(c) Drawing Item 2
3 Repair overhead electrical crane 4(c) Drawing Item 3
4 Industrial machine exhaust & filter installation and
modification works
5 Pipework and its fitting installation & modification for
Fresh water supply; and
Drainage;
6 Installation of electrical socket outlets
[All existing electrical power supply (included 1 phase
and 3 phases) shall be maintained]
7 Dismantle the wall partition with door 4(c) Drawing Item 14
8 Pipeworks and ports Installation for network 4(c) Drawing Item 11
9 Builder works:
Build and install the wall partitions with door as a
storage room
10 To perform the works for fulfilling general requirements
of Building Services Installation
Lighting;
Fire Service Installations included but not limited to
install a Fire Extinguisher(s);
Air Conditioning & ventilation included but not limited
to modify / cut-off the fresh air ductworks;
Emergency Public Address;
11 The finishing of partition walls / entrance doors will be
carried out only after the heavy machines, if any, are
installed inside the appointed positions.
4.d) Direct Metal Laser Sintering Workshop
Descriptions Appendix IV
Scopes of works/services 4(d) Summary -
1 Install Transformer (3 phase Input: 380Volt, 100Amp,
output: 1] 200/220V 25kVA or 2) 400V) for the DMLS
Machine
2 Industrial compressed air pipework-s installation &
modification works
3 Dismantle and remove the wall partition 4(d) Drawing Item 1
4 Build and install the L-sharp wall partition with
installation of CCTC Logo and tempered glass windows;
5 To remove and reinstate the wall partition for transport
the machine
6 Replace the wooden door by tempered glass door 4(d) Drawing Item 4
7 Metal shelf supply and installation 4(d) Drawing Item 5
8 Installation of electrical socket outlets 4(d) Drawing -
9 Pipeworks and ports Installation for
Telephone; and
network
10 Floor Epoxy Coating System 4(d) Drawing -
11 Install false ceiling system 4(d) Drawing -
12 Wall paintings / paper works 4(d) Drawing -
13 Industrial machine exhaust & filter installation and
modification works
14 Supply and install glass cabinets 4(d) Drawing -
15 To perform the works for fulfilling general requirements
of Building Services Installation
Lighting;
Fire Service Installations;
Air Conditioning & ventilation;
Emergency Public Address;
16 The finishing of partition walls / entrance doors will be
carried out only after the heavy machines, if any, are
installed inside the appointed positions.
4.e) Powder Injection Moulding Technology Laboratory
(Location Codes: A040 and A041)
Descriptions Appendix V &
Scopes of works/services 4(e) Summary -
Location Code: A041
1 Floor Epoxy Coating System 4(e) Drawing -
2 Repair existing industrial cooling water tower 4(e) Drawing Item 3
3 Painting works 4(e) Drawing -
4 Replace all the aged conduits / pipeworks 4(e) Drawing Item 5
5 Supply and install cabinet 4(e) Drawing Item 6
6 Installation of electrical socket outlets 4(e) Drawing -
7 Pipeworks and ports Installation for network 4(e) Drawing Item 8
8 Replace / Repaint all corrosive electrical switches and
9 Repair the ceiling works 4(e) Drawing -
10 To perform the works for fulfilling general
requirements of Building Services Installation
electrical control box
Lighting;
Fire Service Installations;
Air Conditioning & ventilation (average temp. is
maintained at 22o
Emergency Public Address;
C);
Location Code: A040
11 Replace the cables to two injection moulding machines 4(e) Drawing Item 1
12 Provide metal covers as protection for all exposed
13 Supply and install a showcase drawer 4(e) Drawing Item 3
14 Supply and install shelves as storage usage 4(e) Drawing Item 4
15 Painting works for the walls 4(e) Drawing -
16 Floor Epoxy Coating System 4(e) Drawing -
17 Installation of electrical socket outlets 4(e) Drawing -
18 Replace the wooden door by tempered glass door 4(e) Drawing -
conduits and pipeworks
4.e) Powder Injection Moulding Technology Laboratory
(Location Codes: A040 and A041)
Descriptions Appendix V &
Scopes of works/services 4(e) Summary -
Location Code: A040
19 To perform the works for fulfilling general
requirements of Building Services Installation
Lighting;
Fire Service Installations;
Air Conditioning & ventilation;
Emergency Public Address;
Location Codes: A040 and A041
20 The finishing of partition walls / entrance doors will be
carried out only after the heavy machines, if any, are
installed inside the appointed positions.
4.f) Carbon Composite Technology Workshop
1 Supply and install 3 sets electrical switch / plug-in /
2 Industrial compressed air pipework-s installation &
3 Industrial chilled water pipework-s modification works
4 Build and install movable partition wall 4(f) Drawing Item 1
5 Industrial chilled water pipeworks, industrial
Descriptions Appendix VI
Scopes of works/services 4(f) Summary -
MCB for 3 machines (5kW, 15kW and 30kW)
modification works
for 3 machines
compressed air pipeworks and electrical wiring
modification works for -

Documents

Tender Notice
Login to view

Similar tenders

Hong Kong Public Procurement Intelligence

Frequently asked questions

The bid deadline for Renovation Works for Workshops and Laboratories was 15 Mar 2016. Bidding is closed.

This tender has been issued by HONG KONG PRODUCTIVITY COUNCIL in Hong Kong.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 45453100 - Refurbishment work.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 5390422. The purchaser document reference is HA00103.

See the Similar Tenders section on this page or browse other tenders from Hong Kong.

This tender falls under Construction and Real Estate in Hong Kong. Suppliers in these sectors can track similar Hong Kong tenders using CPV-based alerts.