Expired Tender Netherlands ICB TOT Ref. 101034119

Reconfigurable Antennas for Mobile Terminals Based Tender - 101034119

Tender notice from Netherlands, published on 10 May 2024.

Executive Summary

The EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE (ESTEC) has issued a Tender notice for the procurement of a Reconfigurable Antennas for Mobile Terminals Based on Active Actuators in the Netherlands. This Tender notice was published on 10 May 2024 and is scheduled to close on 26 Aug 2024, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 101034119, while the tender notice number is and Register on the platform.

Key facts

Summary
Reconfigurable Antennas for Mobile Terminals Based on Active Actuators
TOT Ref. No.
101034119
Document Ref. No.
Country
Netherlands
Notice type
Tender
Competition
ICB
Publication date
10 May 2024
Bid deadline
26 Aug 2024
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Other Funding Agencies

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Reconfigurable Antennas for Mobile Terminals Based on Active Actuators (Artes 4.0 at 7c.080) - Re-Issue.
Open Date: 07/05/2024 17:51 CET
Closing Date: 26/08/2024 13:00 CET
Price Range: 500 KEURO
The objective of the activity is to design, manufacture and test a Ku- or Ka-band transmit or receive antenna based on reconfigurable actuators for large mobile terminals connected to Low Earth Orbit (LEO) satellites. Targeted Improvements: Enabling reconfigurable terminal antennas with scan angles up to 50-60 degrees exploiting active actuators like pin or varactor diodes, MEMS and other possible actuators with an overall antenna thickness below 10 wavelengths. Description: Today antennas for mobile terminals are repointing the pattern mainly using mechanical scanning or an electronic scanning. Mechanically scanning antennas with a medium thickness are already available as products for trains and aeroplanes. They are still expensive, and their thickness is around 15-20 wavelengths. For electronically scanning antennas, one of the main complexities is associated to the realization of the beamforming network. Even if a single beam is required instantaneously, the requirements to scan this beam in a large field of view implies that the antenna must be able to create patterns in thousand different pointing directions. Among the available compact antenna technologies, active phased arrays with electronic scanning start being available in the market providing a good control on beam-steering and a moderate angular coverage. However, the complexity and cost of active antennas, particularly associated to the beamforming network contribution, is not compatible yet with the stringent requirements associated to mobile platforms. The objective of this activity is to use reconfigurable actuators, like pin diodes, varactor diodes, MEMS or other possible actuators to modify the array tapering and repoint the instantaneous beam pattern. These types of actuators are known since several years but only now they started being considered as mature enough for mobile terminal antennas. In particular, pin diodes act essentially as on-off switches while varactor diodes permit to modulate continuously the phase value. Hybrid architecture combining both pin diodes and varactors could be used to increase the phase-shift resolution required to cope with the stringent radiation masks associated to the different regulatory standards(ITU, ETSI, etc.) for transmitting antennas. Furthermore, pin diode-based architectures could achieve a passive amplitude control without using any power amplifier. Reconfigurable screens working as reflectors or lenses and adopting pin or varactors diodes have been successfully demonstrated in C, X, Ku and Ka bands. A natural evolution and extension, proposed here, consists in including these actuators inside a phased array in order: a) to significantly reduce the form factor of the antenna as compared to configurations adopting feeders quite far as compared to the screen position, and b) to significantly reduce the complexity of the antenna as compared to conventional active arrays. This new type of antenna architectures could be adopted on board mobile terminals like trains or buses.

Documents

Tender Notice
Login to view

Netherlands Public Procurement Intelligence

Frequently asked questions

The bid deadline for Reconfigurable Antennas for Mobile Terminals Based on Active Actuators was 26 Aug 2024. Bidding is closed.

This tender has been issued by EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE (ESTEC) in Netherlands.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 101034119. The purchaser document reference is not provided in the notice.

Browse other tenders from Netherlands or search by relevant keywords and CPV classification.