Qualification system without call for competition: Procurement of normally open pressure... Tender

Procurement Summary

Country : Belgium

Summary : Qualification system without call for competition: Procurement of normally open pressure regulators (according to EN 334) for controlling the natural gas pressure in pressure reducing stations. The re...

Deadline : 11 Mar 2020

Other Information

Notice Type : Tender

TOT Ref.No.: 31441948

Document Ref. No. : 113551-2019

Competition : ICB

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Purchaser : FLUXYS BELGIUM N.V.
Office Name: Fluxys Belgium n.v.
Address: Avenue des Arts 31
Town: Brussels
Postal Code: 1040
Contact Point: Geert Vandeputte

Phone: +32 22827484
Belgium
Email :geert.vandeputte@fluxys.com
URL :https://www.fluxys.com/

Tender Details

Object of the contract
Procurement of normally open pressure regulators (according to EN 334) for controlling the natural gas pressure in pressure reducing stations. The regulators will be operated by natural gas as a power source for the pilot and the actuator (there is no alternative power source available on sites).The pressure regulator assembly will consist of:— the regulating valve (cage type, plug type or axial type are the preferred options), — the pneumatic actuator (powered by natural gas), — the pilot (powered by natural gas).The valve should have the possibility to be equipped with a linear or an equal-percentage characteristic. The selection between both characteristics is to be made at time of order.Further on, the whole assembly needs to be self-regulating using a locally adjustable setpoint. The natural gas supply pressure to the assembly will be at a maximum pressure of 84 barg. Reducing this pressure for use for the pilot and the actuator is within the scope of the supplier.The whole assembly should also be 0 emission, which means that no gas should be released into the environment during normal operation. Instead, the released gas will be re-injected into the downstream pipe at a pressure of at least 15 barg.Assembly should also be fit for 0 emission start-up with 0 barg downstream pressure.The pressure regulator assembly will be permanently installed in a hazardous area with classification II 2 G and should therefore have the minimum ATEX protection type EEXd IIB T3.All as further described in the general Fluxys specifications 4.90000.09061 Rev D, 4.90000.00070 Rev D, 4.90000.09920 Rev 4.00 and 4.90000.09979 Rev C as attached to this qualification.Procurement after qualification will be spot tendering or, if possible, 5-year frame agreements for the standard items.Note: suppliers without regulators but with potential supplies of control valves, SSD`s, etc. may always provide for information only a general file for this equipment. As this additional equipment is not part of this European qualification, there is no need to fill in the ESPD as per paragraph “VI.3) Additional information” hereafter. This document can be sent by e-mail to geert.vandeputte@fluxys.com.

Description: Qualification system without call for competition: Procurement of normally open pressure regulators (according to EN 334) for controlling the natural gas pressure in pressure reducing stations. The regulators will be operated by natural gas as a power source for the pilot and the actuator (there is no alternative power source available on sites).The pressure regulator assembly will consist of:— the regulating valve (cage type, plug type or axial type are the preferred options), — the pneumatic actuator (powered by natural gas), — the pilot (powered by natural gas).The valve should have the possibility to be equipped with a linear or an equal-percentage characteristic. The selection between both characteristics is to be made at time of order.Further on, the whole assembly needs to be self-regulating using a locally adjustable setpoint. The natural gas supply pressure to the assembly will be at a maximum pressure of 84 barg. Reducing this pressure for use for the pilot and the actuator is within the scope of the supplier.The whole assembly should also be 0 emission, which means that no gas should be released into the environment during normal operation. Instead, the released gas will be re-injected into the downstream pipe at a pressure of at least 15 barg.Assembly should also be fit for 0 emission start-up with 0 barg downstream pressure.The pressure regulator assembly will be permanently installed in a hazardous area with classification II 2 G and should therefore have the minimum ATEX protection type EEXd IIB T3.All as further described in the general Fluxys specifications 4.90000.09061 Rev D, 4.90000.00070 Rev D, 4.90000.09920 Rev 4.00 and 4.90000.09979 Rev C as attached to this qualification.Procurement after qualification will be spot tendering or, if possible, 5-year frame agreements for the standard items.Note: suppliers without regulators but with potential supplies of control valves, SSD`s, etc. may always provide for information only a general file for this equipment. As this additional equipment is not part of this European qualification, there is no need to fill in the ESPD as per paragraph "VI.3) Additional information" hereafter. This document can be sent by e-mail to geert.vandeputte@fluxys.com.

Authority Type: Utilities entity
Contact Nature: Supplies
Procedure: Not applicable
Document: Qualification system without call for competition
Regulation: European Union
Award criteria: The most economic tender
CPV code: 42131141
CPV Description: Pressure-reducing valves.

Control valves.

Pressure-reducing, control, check or safety valves.


Internet address (URL): https://www.fluxys.com/

Documents

 Tender Notice