Expired Tender Poland ICB TOT Ref. 8791799

Metal-working machining centre Tender in Poland - 8791799

Tender notice from Poland, published on 21 Oct 2016.

Executive Summary

The PPUH - has issued a Tender notice for the procurement of a Metal-working machining centre in the Poland. This Tender notice was published on 21 Oct 2016 and is scheduled to close on 30 Nov 2016, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 8791799, while the tender notice number is 369324-2016 and Register on the platform.

Key facts

Summary
Metal-working machining centre
TOT Ref. No.
8791799
Document Ref. No.
369324-2016
Country
Poland
Notice type
Tender
Competition
ICB
Publication date
21 Oct 2016
Bid deadline
30 Nov 2016
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract

The contract is for the purchase of the press brake tandem with the real measurement of the bending angle according to the following range: 1. Hydraulic press brake bending poles prepared for the cycle and automated operating system TANDEMParametry mandatorily required :: thickness of bent sheet metal from 3 mm to 35 mm ;: stamp and die adapted for bending sheet metali?1/2a thickness of 3 mm to 35 mm ;: Species bent material at least a single S355 ;: possibility of bending of each machine and the entire machine in tandem ;: The automatic feeding of the bent piece in the bending process (an automated bumpers pneuma-cal front and rear) ;: Central control and bending ;: The use of pneumamatic system buffers and feeder, which alternately working ... meet ... c functions both as basing administration in the proper sequence bending ™ photos (possibility i?1/2 ‡ sheet positioning the angle ... tem in accordance with its stoĹĽkowym cut away) ;: controlled layout of co, working ... cy alternately rear bumper (X1-X2) and the front feeder (F1-F2-F3) ;: the scope of work bumper on the front of the massestriazine: the tray to at least 4 m ;: The operating range of the rear bumper to at least 2 m ;: The actual measurement of the bending angle: running in tandem and for each machine individually ;: The automatic slide ready to size and roller conveyor receiving diffracted form will ;: The use of hydraulic clamping stamps ;: the use of a hydraulic clamp of the upper tool with the system inbearing, supporting the Main extension grip stamp: Gorne tool with the ability to exchange punches bending: tips working ;: Lower matrix programmable CNC ;: Since the loading of blank feeder bending to be carried out in an automatic process to complete the full bending the pole or part and then automatically He will run disconnectCargo bent poles on the table receiving ;: Tools for sheet metal bending enclosed by rice-relations (available after the submission of the declaration of a burying-confidentiality of the information) ;: The two supports for each machine supports the process of leaving the plate during bending ;: Automatic compensation system of the lower a table with drive is dem-hydro-mechanicalwhite CNC controllable, measurable parameters and scored :: overhang in the side housings machine a minimum of 1 800 mm: up to 2 200 mm ;: clearance of 1 000 mm to 1 500 mm ;: Stroke slider minimum 550 mm ;: total pressure including a minimum of 3 200 tone: not of the maximum-4 000 tonnes (2 x min. 1 600 tonnes, max 2 000 tonnes) ;: engine power (or if there is more the sum power of all engines), the capdynczej machines working in tandem mi-nimum 70 kW: maximum 110 kW ;: length of bent sheet metal at least 15 000 mm maxi-Malnia 17 000 mm (tandem 2 x 7 min 500 mm max 500 mm 8) ;: distance between racks ( feet) of a single machine working in tandem at least 6 100 mm.Dodatkowy parameter scored :: Independent compensation additional adapters mounting of the upper XHRia carried out by hardened laser cartridge ejection (YES / NO).
Description: Metal-working machining centre
Authority Type: Other

Contact Nature: Supplies

Procedure: Open procedure

Document: Contract notice

Regulation: European Union

Award criteria: The most economic tender

CPV code: 42638000, 42633000, 42611000

CPV Description: Metal-working machining centre.  

Bending, folding, straightening or flattening machines.  

Special-purpose machine tools.  
Internet address (URL): www.elmonter.pl

Directive: Classical Directive (2004/18/EC)

Documents

Tender Notice
Login to view

Similar tenders

Poland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Metal-working machining centre was 30 Nov 2016. Bidding is closed.

This tender has been issued by PPUH - in Poland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 42638000 - Metal-working machining centre, 42633000 - Bending, folding, straightening or flattening machines, 42611000 - Special-purpose machine tools.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 8791799. The purchaser document reference is 369324-2016.

See the Similar Tenders section on this page or browse other tenders from Poland.

This tender falls under Technology and Equipment in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.