Interview Recording And Management System Tender in USA - 7243405
Tender notice from USA, published on 09 Jul 2016.
Executive Summary
The DEPARTMENT OF THE ARMY has issued a Tender notice for the procurement of a Interview Recording And Management System Equipment in the USA. This Tender notice was published on 09 Jul 2016 and is scheduled to close on 19 Jul 2016, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 7243405, while the tender notice number is W91247-16-T-8362 and Register on the platform.
Key facts
Summary
Interview Recording And Management System Equipment
This is a combined synopsis/solicitation for commercial items prepared in accordance with the information in far subpart 12.6, using simplified acquisition procedures found at far 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. Paper copies of this solicitation will not be available. This combined synopsis/solicitation shall be posted on fedbizopps. This solicitation documents and incorporates provisions and clauses in effect through far and dfars. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: http://farsite.hill.af.mil/. The naics code is 334310 - audio and video equipment manufacturing. This requirement has been set aside for 100% small business. The government requests responses from qualified sources capable of providing equipment with the following salient characteristics: interview recording and management system (irsm) equipment that records testimony and preserves same for reference at a later time. The contractor shall furnish all labor, material, equipment, incidentals, supervision and transportation for the installation of cardinal peak s casecracker system or equal systems with the work outlined below: a. Fort stewart cid detachment - fort stewart, georgia -c provide two (2) two-room stationary recording interview and interrogation system equipment and support.
-c installation of the two (2), two-room system must be turn-key to include: connecting all items from the peripherals package to the casecracker system or equal, professionally wiring and cabling the interview rooms and the monitoring room and properly configuring casecracker or equal audio, video, and software settings.
-c comprehensive training on the system b. Fort gordon cid detachment - fort gordon, georgia -c provide one (1) one-room stationary recording interview and interrogation system equipment and support.
-c provide one (1) two-room stationary recording interview and interrogation system equipment and support.
-c installation of the one-room and two-room systems must be turn-key to include: connecting all items from the peripherals package to the casecracker or equal system, professionally wiring and cabling the interview rooms and the monitoring room and properly configuring casecracker or equal audio, video, and software settings.
-c comprehensive training on the system c. Haaf cid detachment - hunter army airfield, georgia -c provide two (2) two-room stationary recording interview and interrogation system equipment and support.
-c installation of the two (2), two-room systems must be turn-key to include: connecting all items from the peripherals package to the casecracker or equal system, professionally wiring and cabling the interview rooms and the monitoring room and properly configuring casecracker or equal audio, video, and software settings.
-c comprehensive training on the system any property changes made during the installation/wiring of the rooms must be returned to the state prior to installation, to include the patching holes and painting surfaces. The contractor will be responsible for the transportation of its personnel, to include meals and lodging. The contractor will be responsible for the shipping of any equipment required for the installation of the interview recording systems and proper recovery of the installation to its original state. The contractor shall provide training session to all available personnel, following installation to ensure familiarity with the system by the daily users. The contractor shall provide customer support/technical support at all locations listed in this scope of work from 0800-1700 on weekdays, with a 1 hour response time in order to resolve any issues regarding the casecracker or equal system. The contractor shall provide a 3 year warranty on hardware and software. The contractor shall provide software updates for 3 years. If web based updates are not available, then the software updates shall be provided via mail with explicit instructions. The contractor shall be available within 1 hour of contact to resolve any issue regarding the successful updates of software. All work shall be in accordance with (iaw) all applicable codes and standards including but not limited to: -c department of army polygraph activities regulation ar 195-6
-c unified building code (most recent edition).
-c national electrical code
-c national fire protection agency requirements
-c installation design guide.
-c united states army corps of engineers, safety and health requirements manual em 385-1. Applicable edition at award.
-c tm 111 guidance provided in united states army training and doctrine command (tradoc) force protection program (fpp); unified facilities criteria (ufc) for buildings.
-c international plumbing code - icc-ipc
-c ashrae
-c i3a
-c all fire protection and mass notification shall be iaw with the local installation s sop guidelines. Interested firms responding to this synopsis/solicitation are to include the following information: 1. Firm s name, profile, address, duns number, cage code, point of contact, telephone number, and email address. 2. Firm s capability to perform the required service. Be specific with relevant contracts of same or similar in nature of work, size, and complexity. Include contract description, dollar value, and customer poc. Contracts may include those with federal, state and local government as well as private companies. Each reference must include the contract dollar value; the contract period of performance; and a brief description of the contract requirements. 3. Firm s business size (large or small) and all applicable socio-economic category information (i.e. Sdb, 8(a) hubz, edwosb, wosb, sdvosb, etc.). 4. Contractor shall submit a timeline, with their response, that designates projected delivery date of equipment, duration of installation and training schedule. 5. Only email responses will be accepted with a page limitation of 10 pages. Respondents are encouraged to review the information requested above carefully and ensure a complete response for thorough consideration. The government will not review general capability statements, please ensure submissions are tailored to this requirement(s) of the above request. The government will not return any information submitted in response to this synopsis. Questions shall be submitted via email to the poc below. Questions regarding this combined synopsis/solicitation announcement shall be submitted nlt 0800 eastern standard time (est) on 13 july 2016. After this deadline, questions will not be considered regarding this announcement. Fort stewart, georgia; fort gordon, georgia; hunter army airfield, georgia 36 -- special industry machinery
naics code:
334 -- computer and electronic product manufacturing/334310 -- audio and video equipment manufacturing 334 -- computer and electronic product manufacturing/334310 -- audio and video equipment manufacturing
The bid deadline for Interview Recording And Management System Equipment was 19 Jul 2016. Bidding is closed.
This tender has been issued by DEPARTMENT OF THE ARMY in USA.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 48311100 - Document management system.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 7243405. The purchaser document reference is W91247-16-T-8362.
This tender falls under Computer Hardware and Software Services in USA. Suppliers in these sectors can track similar USA tenders using CPV-based alerts.