Expired Tender Iraq ICB TOT Ref. 77263534

Implementation of a Feeding Pipe for Sector 1093 Tender - 77263534

Tender notice from Iraq, published on 12 Jan 2023.

Exeutive Summary

The REHABILITATION, EDUCATION AND COMMUNITY HEALTH “REACH” ORGANIZATION has issued a Tender notice for the procurement of a Implementation of a Feeding Pipe for Sector 1093 and the Installation of a High-Pressure Pump in the Iraq. This Tender notice was published on 12 Jan 2023 and is scheduled to close on 18 Jan 2023, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 77263534, while the tender notice number is REACH-SUP-ITB-2023-002 and Register on the platform.

Key facts

Summary
Implementation of a Feeding Pipe for Sector 1093 and the Installation of a High-Pressure Pump
TOT Ref. No.
77263534
Document Ref. No.
REACH-SUP-ITB-2023-002
Country
Iraq
Notice type
Tender
Competition
ICB
Publication date
12 Jan 2023
Bid deadline
18 Jan 2023
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Other Funding Agencies

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Implementation of a Feeding Pipe for Sector 1093 and the Installation of a High-Pressure Pump for Hay Al Askary Neighborhood in the Kasbah of Al-Zab Sub-District in Hawija District.
Preparing material, labor force and necessary instruments to carry out earthworks excavations in all types of soil (soft, hard, etc.) with a depth of (1) m above the top of the pipe and a width of (60) cm, and laying with connecting the polyethylene (HDPE) pipe (SDR17) diameter (250) mm pressure (10 atmospheres) Turkish made, then filling with fine soil or river sand with a thickness of (10) cm below

the pipe and (10) cm over the top of the pipe, and then back filling with exisiting soil of the site in layers not more than 30cm thick with

good compaction, also lifting the rubble, leveling the site and returning it to what it was previously “inclusive”, the price includes

purchasing pipes and accessories (partitions, reversibles, locks ... etc.) necessary to complete the work with the work of concrete slab blocks for reversals and partitions, according to the specifications and the direction of the supervisor engineer
2 Supplying materials, equipment and all requirements for connection with the old network of Sector 1093 with a plast pipe 6" diameter Turkish madcin (3) three locations on the one hand, and linking it with the old line (plastic type with diameter 200 mm) Turkish made which is feeding the sector above, the cost includes purchasing pipes and accessories from (partitions, reversals, locks .. etc.) necessary to complete the work and according to the specifications and the direction of the superv isor engineer.

3 Prepare materials and equipment and cut the paving of concrete casting or asphalt paving for the street using the mechanical cutter, with a thickness of (20-25) cm and a width of (40-60) cm. and the work includes lifting the rubble and throwing it outside the municipal boundaries and in the places designated for throwing rubble and according to the instructions of the supervising engineer .

4 Supplying materials and equipment and re-easting the street with reinforced concrete 21 MPa and 20cm thick and (40-60) cm wide, using a layer of BRC 6 mm thick and 15x 15cm spacing, and then re- cladding the pipe path in the street with asphalt 10 cm thick and (40- 60) cm wide The work includes laving of mixed gravel (Space) with good compaction in the form of layers and according to the technical specificatioas and directives of the supervisor engineer.
5 installation of the high thrust crew: the installation, commissioning and testing of the high thrust crew equipped by (Kirkuk Water Directorate) a multi-stage type with specifications (Q=200 m3/h) (H=80 m). It includes the mechanical connection of the pump using attachments from pipes with a diameter of (10) knots (galvanized) and a length of not less than (50) m (push and suction pipes), as well as locks on the suction and thrust pipes with a lock of the anti-return (jack and wind) and the installation of (foot valve) & strainer) inside the ground assembly lank with all accessories such as connecting with flanges, screws, blacksmithing. welding and necessary modifications and linking on the line (the Military District) diameter (250) mm polyethylene using (flange adapter), including drilling the wall of the concrete collection tank thickness (30) cm Making a hole with a diameter of not less than (250) mm for the intake pipe and pouring a reinforced concrete base for the pump with dimensions (1.5 * 2.5) m and an appropriate height according to the work requirements and all that is needed to make the work complete and according to the technical specifications.

6 Supplying and installing a two-stage starter panel containing a circuit breaker suitable for the engine capacity and a conductor not less than (AC3-150kw) installed inside the board. Etc.) with the use of cables measuring (3*95) mm2 from the electrical operating panel (starter) inside the hall to the pump, and cables measuring (3*150) mm and a length of no less than (8) m inside a galvanized cable, and extending a cable from the source to the operating panel Electricity, with a length of no less than (25) m. inside a plastic tube with a diameter of 110 mm and a depth of not less than 40 cm from the level of the natural ground, and all accessories that make the work integrated and according to the technical specifications and directives of the superv ising engineer

7 Qualification of the high thrust pumps hall: Supplying materials and equipment and carrying out rehabilitation works for the hall of high-pressure pumps with dimensions (10 * 5 m) and a height of (3) m. including work covering the floor of the hall with mosaic tiles with the syrup, taking into account the places of the midwivcs' waterways and water drainage channels at a depth of (20) cm from the level of the face of the cache and covering it with jaggcr Pallet 5 mm. supplying and installing (12) m2 windows, plastering the ceiling of the hall, installing (15) internal and external LED lighting installations, with sockets (13.15) MB. (10) and circulating 6 lines, filling the joints of the stickers with mastic, preparing and installing rainwater drains 3 knot gallons. 3m high, number (1) Painting the hall from the inside and outside with the main door with Turkish paints 3 layers and installing a kilo (lock) for the main door, including the work. The construction of a manual gantry crane in the ceiling of the hall, a load of 3 tons using a shilman (10.8) knots, and all that is needed to complete the work and according to the technical specifications and directives of the supervising engineer
9 Supplying and installing a mechanical flowmeter of an approved origin, with a capacity of no less than 250-300 m3/h, and fastening on a galvanized iron pipe with a diameter of (10) knoLs. including work, fastening with flanges and bolts, and all blacksmithing. welding, alterations and all that is necessary to complete the work and according to the technical specifications and directives of the superv ising engineer.

10 Supplying and erecting an induction board with dimensions (2 * 1.5) with a galvanized frame (1/2)" square, cover plate, thickness of 0.8 mm. with flcxo adhesive, columns tubes 4*4. thickness of 3 mm and height of 2.5 m. according to the instructions of the supervising engineer.

Documents

Tender Notice
Login to view

Iraq Public Procurement Intelligence

Frequently asked questions

The bid deadline for Implementation of a Feeding Pipe for Sector 1093 and the Installation of a High-Pressure Pump was 18 Jan 2023. Bidding is closed.

This tender has been issued by REHABILITATION, EDUCATION AND COMMUNITY HEALTH “REACH” ORGANIZATION in Iraq.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 77263534. The purchaser document reference is REACH-SUP-ITB-2023-002.

Browse other tenders from Iraq or search by relevant keywords and CPV classification.